Wraps by car

Venturi 210 wrap

The Venturi 210 wrap page covers the vinyl wrap needs of this French sports car. Built from 1984 to 1995, the 210 is a low-built two-door with either a convertible or coupe body. A full wrap of the convertible takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. The coupe needs slightly more film at about 39 ft (12 m).

1generations11.5 mof film for a full wrap

Venturi 210, first generation, factory photo
Venturi 210, first generation. Factory color shown.

Venturi 210 wrap colors and ideas

  • Venturi 210 black wrap
  • Venturi 210 white wrap
  • Venturi 210 gray wrap
  • Venturi 210 silver wrap
  • Venturi 210 red wrap
  • Venturi 210 blue wrap
  • Venturi 210 green wrap
  • Venturi 210 yellow wrap
  • Venturi 210 orange wrap
  • Venturi 210 purple wrap
  • Venturi 210 pink wrap
  • Venturi 210 teal wrap
  • Venturi 210 brown wrap
  • Venturi 210 gold wrap
  • Venturi 210 chrome wrap
  • Venturi 210 color shift wrap
  • Venturi 210 carbon fiber wrap
  • Venturi 210 camo and patterned wrap

How much vinyl to wrap a Venturi 210

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1995convertible, coupe (2 doors)161.0 in (4,090 mm)about 38 ft (11.5 m) for the convertible to 39 ft (12 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)

Venturi 210 wrap cost factors

Venturi 210 wrap cost depends on the size of the car, the body style, and the film you choose. The car is 161.0 in (4,090 mm) long, so a full wrap uses about 38 ft (11.5 m) to 39 ft (12 m) of 60-inch (1.52 m) film. The convertible needs less film than the coupe because its top is not wrapped. Labor is also affected by the two long doors and the need to trim around them.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 39 ft (12 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Venturi 210 wraps by generation

Swipe sideways. Tap a card for the full description.

Venturi 210, first generation, factory photo
Factory color shown

1984–1995 Venturi 210 convertible, coupe (first generation)

1984–1995convertible, coupe (2 doors)161.0 in (4,090 mm)

The open top of the Venturi 210 is handled differently depending on the type of top. The fabric top is not wrapped, and the vinyl film ends where the top begins, at its base. A folding hard top, if fitted, is wrapped as separate panels that move with the top. This keeps the film from cracking when the top is folded.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) for the convertible to 39 ft (12 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Venturi 210

Smaller jobs on a Venturi 210 include partial wrap of the roof, hood, or mirror caps. For a color change, you can wrap the hood or the roof alone and leave the rest of the car as is. Chrome delete covers the window trim and badges with black film, but keep in mind the car has little bright trim. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Venturi 210: body, cut-outs and film

A Venturi 210 vinyl wrap must respect the car's compact 161.0 in (4,090 mm) length and two body styles. The convertible and coupe share the same overall size, so the main difference is the roof area. The coupe has a full metal roof that needs wrapping, while the convertible's top is not covered. The two long side doors are each wrapped as one large piece of film.

Venturi 210 wrap ideas start with the parts that need extra work during installation. The fabric top on the convertible is not wrapped, and the film ends where the top begins. The side doors are long, so each door is cut and applied as one continuous panel. For a clean finish, the installer must trim carefully around the door handles and mirrors.

How much vinyl to wrap a Venturi 210 depends on whether you have the convertible or the coupe. The two styles differ mainly in the roof, which changes the amount of film by about 1 ft (0.3 m). The convertible needs about 38 ft (11.5 m) of 60-inch (1.52 m) film, while the coupe needs about 39 ft (12 m). If you plan to wrap the roof in chrome or patterned film, add up to about 51 ft (15.5 m) for either body.

Questions about wrapping a Venturi 210

How much vinyl does it take to wrap a Venturi 210?

A Venturi 210 takes about 38 ft (11.5 m) of vinyl for the convertible or 39 ft (12 m) for the coupe. These numbers assume 60-inch (1.52 m) cast film and a full wrap. If the roof is done in chrome or patterned film, the total can go up to about 51 ft (15.5 m).

Is the top of a Venturi 210 wrapped?

No, the fabric top of a Venturi 210 is not wrapped. The film stops at the edge of the top, so the roof remains uncovered. A folding hard top, if present, is wrapped as separate panels of its own.

Which Venturi 210 body takes more film?

The coupe takes more film than the convertible Venturi 210. The coupe needs about 39 ft (12 m) of film, while the convertible needs about 38 ft (11.5 m). The difference is the roof: the convertible's top is not wrapped, but the coupe has a full metal roof.

Can I wrap only the hood or the roof of a Venturi 210?

Yes, you can wrap only the hood or the roof of a Venturi 210. Partial wrap jobs often include the roof, hood, or mirror caps. You can also choose chrome delete for window trim and badges, or clear paint protection film on the front end.