Wraps by car

Venturi 400 GT wrap

The Venturi 400 GT wrap guide covers the 1994–1998 first generation sports car and the vinyl wrap film a full wrap of its coupe body takes. The Venturi 400 GT is a two-door coupe with a length of 163.0 in (4,140 mm), and a full vinyl wrap needs about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that to about 54 ft (16.5 m) for the same body.

1generations13 mof film for a full wrap

Venturi 400 GT, first generation, factory photo
Venturi 400 GT, first generation. Factory color shown.

Venturi 400 GT wrap colors and ideas

  • Venturi 400 GT black wrap
  • Venturi 400 GT white wrap
  • Venturi 400 GT gray wrap
  • Venturi 400 GT silver wrap
  • Venturi 400 GT red wrap
  • Venturi 400 GT blue wrap
  • Venturi 400 GT green wrap
  • Venturi 400 GT yellow wrap
  • Venturi 400 GT orange wrap
  • Venturi 400 GT purple wrap
  • Venturi 400 GT pink wrap
  • Venturi 400 GT teal wrap
  • Venturi 400 GT brown wrap
  • Venturi 400 GT gold wrap
  • Venturi 400 GT chrome wrap
  • Venturi 400 GT color shift wrap
  • Venturi 400 GT carbon fiber wrap
  • Venturi 400 GT camo and patterned wrap

How much vinyl to wrap a Venturi 400 GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–1998coupe (2 doors)163.0 in (4,140 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Venturi 400 GT wrap cost factors

Venturi 400 GT wrap cost depends on the film, the shop's labor rate, and the condition of the body. The size of the car sets the film amount at about 43 ft (13 m) of 60-inch (1.52 m) cast film for a full wrap, and chrome or patterned film raises the figure to about 54 ft (16.5 m). The two long side doors use large sheets, which call for two installers and more time. Paint repairs and removal of old film add to the labor before the new wrap goes on.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Venturi 400 GT wraps by generation

Swipe sideways. Tap a card for the full description.

Venturi 400 GT, first generation, factory photo
Factory color shown

1994–1998 Venturi 400 GT coupe (first generation)

1994–1998coupe (2 doors)163.0 in (4,140 mm)

The 1994–1998 first generation Venturi 400 GT is a coupe that may have original or repainted panels, so a test spot on the paint is part of the job. The installer checks a small area before the full wrap to see how the adhesive reacts. Fresh paint must be fully cured before film is applied, and old paint may need a cleaning compound first. Panel alignment on this hand-built sports car can vary, so the film is trimmed to each car.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Venturi 400 GT

A partial wrap on a Venturi 400 GT covers the roof, the hood, or the mirror caps. A chrome delete covers the window trim and the badges with black film, and a paint protection film (PPF) is clear film on the front end to guard against stone chips. The two side doors are left out of a partial wrap unless the owner wants only the lower half. These smaller jobs use less film than the full 43 ft (13 m) but still follow the same panel shapes.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Venturi 400 GT: body, cut-outs and film

A Venturi 400 GT vinyl wrap is shaped by the car's coupe style and its 163.0 in (4,140 mm) overall length. The two long side doors dominate the sides, and each door panel becomes one large piece of film. The short front and rear overhangs leave less film around the bumpers than on longer cars. The wrap plan follows the body lines from the nose to the rear deck.

Venturi 400 GT wrap ideas start with the two long side doors, because each door is one large piece of film that can carry a color or a pattern without seams. The installer cuts around the door handles, the side mirrors, and the window rubbers, and the badges come off before the film goes on. The front bumper and the rear bumper are wrapped in separate pieces, with relief cuts at the air intakes. A paint protection film (PPF) on the front end can be cut from the same templates.

How much vinyl to wrap a Venturi 400 GT depends on the film and on the panels, and the first generation body is the only one in this catalog. A full wrap of the coupe takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 54 ft (16.5 m), because the installer must match the pattern across the doors and the rear quarters. The film count stays the same for every 1994–1998 Venturi 400 GT, since the body did not change in those years.

Questions about wrapping a Venturi 400 GT

How much vinyl does it take to wrap a Venturi 400 GT?

A Venturi 400 GT full wrap takes about 43 ft (13 m) of 60-inch (1.52 m) cast film, or about 54 ft (16.5 m) of chrome or patterned film. The extra film for chrome or patterned film comes from matching the pattern across the two long side doors and the rear quarters. These figures cover the 1994–1998 coupe body, which is the only generation of this model.

Can I wrap only the hood or the roof of a Venturi 400 GT?

Yes, the hood or the roof of a Venturi 400 GT can be wrapped alone as a partial wrap, and the same applies to the mirror caps. A chrome delete on the window trim and badges is another partial option, and a paint protection film (PPF) on the front end is clear film for stone chip protection. A partial wrap uses less film than the full 43 ft (13 m) and leaves the side doors untouched.

Is a Venturi 400 GT hard to wrap?

A Venturi 400 GT adds work because of its two long side doors, each of which is one large piece of film that needs two installers to lay without wrinkles. The 163.0 in (4,140 mm) length is short for a sports car, so the bumpers wrap with tighter curves and more relief cuts. The hand-built body can vary from car to car, so the installer trims the film on the panel rather than relying only on a plotter file.

How many generations of the Venturi 400 GT does this page cover?

One generation: this page covers the first generation Venturi 400 GT from 1994 to 1998, which is the only generation in the catalog and the only body style is a two-door coupe. The film estimates and the wrap notes on this page are for that single generation.