Wraps by car

Venturi 260 LM wrap

The Venturi 260 LM wrap page covers the first generation of this sports car, produced from 1989 to 1995. A full vinyl wrap on the coupe body uses about 39 ft (12 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the amount rises to about 51 ft (15.5 m).

1generations12 mof film for a full wrap

Venturi 260 LM, first generation, factory photo
Venturi 260 LM, first generation. Factory color shown.

Venturi 260 LM wrap colors and ideas

  • Venturi 260 LM black wrap
  • Venturi 260 LM white wrap
  • Venturi 260 LM gray wrap
  • Venturi 260 LM silver wrap
  • Venturi 260 LM red wrap
  • Venturi 260 LM blue wrap
  • Venturi 260 LM green wrap
  • Venturi 260 LM yellow wrap
  • Venturi 260 LM orange wrap
  • Venturi 260 LM purple wrap
  • Venturi 260 LM pink wrap
  • Venturi 260 LM teal wrap
  • Venturi 260 LM brown wrap
  • Venturi 260 LM gold wrap
  • Venturi 260 LM chrome wrap
  • Venturi 260 LM color shift wrap
  • Venturi 260 LM carbon fiber wrap
  • Venturi 260 LM camo and patterned wrap

How much vinyl to wrap a Venturi 260 LM

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1995coupe (2 doors)161.0 in (4,090 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Venturi 260 LM wrap cost factors

Venturi 260 LM wrap cost depends on the film type and the amount of material needed for this 161.0 in (4,090 mm) coupe. The wrap uses about 39 ft (12 m) of cast film or 51 ft (15.5 m) of chrome or patterned film. Labor time also changes with the two long side doors, which are large one-piece panels.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Venturi 260 LM wraps by generation

Swipe sideways. Tap a card for the full description.

Venturi 260 LM, first generation, factory photo
Factory color shown

1989–1995 Venturi 260 LM coupe (first generation)

1989–1995coupe (2 doors)161.0 in (4,090 mm)

The first generation of the Venturi 260 LM ran from 1989 to 1995 as a two-door coupe. Paint age on a car of these years may be original or repainted, and a test spot comes before a full wrap. Old paint can lift when the film is removed, so the surface must be checked first.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Venturi 260 LM

Venturi 260 LM chrome delete covers window trim and badges with black film, while a partial wrap can include the roof, hood, and mirror caps. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs use less material than a full wrap on the 161.0 in (4,090 mm) coupe.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Venturi 260 LM: body, cut-outs and film

A Venturi 260 LM vinyl wrap starts with the coupe body, which measures 161.0 in (4,090 mm) in length. The two long side doors each become one large piece of film. This body style has no complex roof or rear door to complicate the install.

Venturi 260 LM wrap ideas often focus on the two long side doors because each door is one large piece of film. You can keep the factory look or create a color change that highlights the low, wide stance. Window trim and badges need careful cut-outs so the film lies flat.

When you work out how much vinyl to wrap a Venturi 260 LM, use the first-generation coupe figures. A full wrap requires about 39 ft (12 m) of cast film or 51 ft (15.5 m) of chrome or patterned film. Only one generation exists in this catalog, so the numbers stay the same for all years.

Questions about wrapping a Venturi 260 LM

How much vinyl does it take to wrap a Venturi 260 LM?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a Venturi 260 LM. If you choose chrome or patterned film, plan for about 51 ft (15.5 m). These figures refer to the first-generation coupe body from 1989 to 1995.

Can I wrap only the hood or the roof of a Venturi 260 LM?

Yes, you can wrap only the hood or the roof of a Venturi 260 LM. A partial wrap on this car may also include the mirror caps. These jobs use less film than a full wrap of the coupe.

Is a Venturi 260 LM hard to wrap?

Yes, a Venturi 260 LM is somewhat hard to wrap because of its two long side doors, each one large piece of film. The 161.0 in (4,090 mm) length means you need long stretches of vinyl without seams. Careful alignment and a second pair of hands help with these panels.

How many generations of the Venturi 260 LM does this page cover?

This page covers one generation of the Venturi 260 LM, produced from 1989 to 1995. The catalog lists the coupe body style for this generation.