Wraps by car

Venturi 300 Atlantique wrap

The Venturi 300 Atlantique wrap is covered on this page, including vinyl wrap needs for each part. The Venturi 300 Atlantique is a sports car produced from 1994 to 2000 in one generation. A full wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Venturi 300 Atlantique, first generation, factory photo
Venturi 300 Atlantique, first generation. Factory color shown.

Venturi 300 Atlantique wrap colors and ideas

  • Venturi 300 Atlantique black wrap
  • Venturi 300 Atlantique white wrap
  • Venturi 300 Atlantique gray wrap
  • Venturi 300 Atlantique silver wrap
  • Venturi 300 Atlantique red wrap
  • Venturi 300 Atlantique blue wrap
  • Venturi 300 Atlantique green wrap
  • Venturi 300 Atlantique yellow wrap
  • Venturi 300 Atlantique orange wrap
  • Venturi 300 Atlantique purple wrap
  • Venturi 300 Atlantique pink wrap
  • Venturi 300 Atlantique teal wrap
  • Venturi 300 Atlantique brown wrap
  • Venturi 300 Atlantique gold wrap
  • Venturi 300 Atlantique chrome wrap
  • Venturi 300 Atlantique color shift wrap
  • Venturi 300 Atlantique carbon fiber wrap
  • Venturi 300 Atlantique camo and patterned wrap

How much vinyl to wrap a Venturi 300 Atlantique

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2000coupe (2 doors)166.9 in (4,240 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Venturi 300 Atlantique wrap cost factors

The Venturi 300 Atlantique wrap cost depends on the size of the car and the film you choose. The coupe is 166.9 in (4,240 mm) long, and a full wrap takes about 46 ft (14 m) of film. Chrome or patterned film needs about 52 ft (16 m), which adds more material. Labor also changes if you remove trim or wrap the doors in one piece.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Venturi 300 Atlantique wraps by generation

Swipe sideways. Tap a card for the full description.

Venturi 300 Atlantique, first generation, factory photo
Factory color shown

1994–2000 Venturi 300 Atlantique coupe (first generation)

1994–2000coupe (2 doors)166.9 in (4,240 mm)

The first generation of the Venturi 300 Atlantique runs from 1994 to 2000 as a coupe with two doors. Paint age on a car of these years means panels may be original or repainted. A test spot comes before a full wrap to check how the film sticks to the old paint.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Venturi 300 Atlantique

A partial wrap on a Venturi 300 Atlantique covers the roof, hood, or mirror caps. A chrome delete wraps the window trim and badges in black film. Paint protection film (PPF) can also be applied as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Venturi 300 Atlantique: body, cut-outs and film

The Venturi 300 Atlantique vinyl wrap is shaped by its coupe body, which measures 166.9 in (4,240 mm) long. With two doors, the coupe has a simple profile that does not need film over rear door gaps. The low sports car stance helps when you plan the hood and roof sections.

Venturi 300 Atlantique wrap ideas start with the two long side doors, where each door is one large piece of film. The front bumper and rear bumper need relief cuts for lights, grilles and exhaust outlets. You can also wrap the mirror caps and the roof as separate parts for a two-tone look.

How much vinyl to wrap a Venturi 300 Atlantique depends on the body length of 166.9 in (4,240 mm). A full wrap uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan about 52 ft (16 m). This car has one generation, so film quantities stay the same for all production years.

Questions about wrapping a Venturi 300 Atlantique

How much vinyl does it take to wrap a Venturi 300 Atlantique?

A full wrap of a Venturi 300 Atlantique takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan about 52 ft (16 m). The coupe body is 166.9 in (4,240 mm) long.

Can I wrap only the hood or the roof of a Venturi 300 Atlantique?

Yes, you can wrap only the hood or the roof of a Venturi 300 Atlantique. A partial wrap covers the roof, hood, or mirror caps. A chrome delete wraps the window trim and badges in black film.

Is a Venturi 300 Atlantique hard to wrap?

The Venturi 300 Atlantique is not hard to wrap if you plan for its size and door design. The coupe is 166.9 in (4,240 mm) long, so you need large film pieces. Each of the two long side doors is one large piece of film, which takes care to install without wrinkles.

How many generations of the Venturi 300 Atlantique does this page cover?

This page covers one generation of the Venturi 300 Atlantique, produced from 1994 to 2000.