Wraps by car

Volkswagen 181 wrap

The Volkswagen 181 wrap page covers the first generation convertible produced from 1969 to 1979 and its vinyl wrap needs. This single-generation model has one body style, a four-door convertible, and a full wrap of the newest body requires about 46 ft (14 m) of 60-inch (1.52 m) cast film. Owners planning a color change wrap can use the measurements here to estimate their project.

1generations14 mof film for a full wrap

Volkswagen 181, first generation, factory photo
Volkswagen 181, first generation. Factory color shown.

Volkswagen 181 wrap colors and ideas

  • Volkswagen 181 black wrap
  • Volkswagen 181 white wrap
  • Volkswagen 181 gray wrap
  • Volkswagen 181 silver wrap
  • Volkswagen 181 red wrap
  • Volkswagen 181 blue wrap
  • Volkswagen 181 green wrap
  • Volkswagen 181 yellow wrap
  • Volkswagen 181 orange wrap
  • Volkswagen 181 purple wrap
  • Volkswagen 181 pink wrap
  • Volkswagen 181 teal wrap
  • Volkswagen 181 brown wrap
  • Volkswagen 181 gold wrap
  • Volkswagen 181 chrome wrap
  • Volkswagen 181 color shift wrap
  • Volkswagen 181 carbon fiber wrap
  • Volkswagen 181 camo and patterned wrap

How much vinyl to wrap a Volkswagen 181

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1979convertible (4 doors)148.8 in (3,780 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Volkswagen 181 wrap cost factors

Volkswagen 181 wrap cost depends on film choice, surface condition, and body areas covered. This car is a compact convertible with four doors and a length of 148.8 in (3,780 mm), so film quantity is moderate at about 46 ft (14 m) for a full color change wrap. Paint correction before wrapping and removing trim pieces add labor time and affect the final cost.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: convertible (4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Volkswagen 181 wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen 181, first generation, factory photo
Factory color shown

1969–1979 Volkswagen 181 convertible (first generation)

1969–1979convertible (4 doors)148.8 in (3,780 mm)

The first generation Volkswagen 181 wrap handles the open top by ending the film where the fabric begins. A fabric top is not wrapped, so installers trim the film cleanly along the windshield header and side rails. A folding hard top is wrapped as its own panels with separate seams and relief cuts.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Volkswagen 181

Partial wrap options for the Volkswagen 181 include the hood, mirror caps, and rear deck in a color change film. Chrome delete on this car covers the window trim and badges with black film. Paint protection film on the front end uses clear film to guard against stone chips without changing the color.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volkswagen 181: body, cut-outs and film

The Volkswagen 181 vinyl wrap is shaped by its compact convertible body and 148.8 in (3,780 mm) length. This car has four doors and a fabric or folding top, so the film coverage focuses on the lower body panels. A standard color change wrap uses about 46 ft (14 m) of 60-inch (1.52 m) material on the newest year of this generation.

Volkswagen 181 wrap ideas must account for the convertible top area where film ends and painted surfaces begin. The doors need standard handle cut-outs, and the fabric top is not wrapped at all. A folding hard top is wrapped as separate panels, which changes how the film is sectioned on those cars.

Knowing how much vinyl to wrap a Volkswagen 181 depends on one generation from 1969 to 1979. The body length stays at 148.8 in (3,780 mm) across those years, so the material estimate does not change. A chrome or patterned film adds about 8 ft (2.5 m) for a total of 54 ft (16.5 m).

Questions about wrapping a Volkswagen 181

How much vinyl does it take to wrap a Volkswagen 181?

A full wrap of a Volkswagen 181 takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. That figure is based on the newest body in the 1969–1979 generation and covers the lower painted panels only. For chrome or patterned film, plan about 54 ft (16.5 m) to allow for pattern matching.

Is the top of a Volkswagen 181 wrapped?

No, the fabric top of a Volkswagen 181 is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as separate panels, but the soft top stays uncovered. Any wrap on this car stops at the top edge of the windshield frame and side rails.

Can I wrap only the hood or the roof of a Volkswagen 181?

Yes, you can wrap only the hood or the roof of a Volkswagen 181 as partial jobs. The hood is one of the standard partial wrap areas listed for this car, along with mirror caps and rear deck. The roof is not a separate panel on a convertible, so a roof wrap would apply only to a folding hard top.

Is a Volkswagen 181 hard to wrap?

A Volkswagen 181 is moderately difficult to wrap because of its convertible top and short 148.8 in (3,780 mm) body. The fabric top needs precise trimming where it meets the film, and the folding hard top adds separate panel work. Four doors mean standard handle and trim cut-outs, and the body lines require careful relief cuts on flat areas.