Wraps by car

Volkswagen Derby wrap

The Volkswagen Derby wrap page covers two generations of this subcompact coupe. A full vinyl wrap of the 152.2 in (3,866 mm) body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, expect to use about 52 ft (16 m).

2generations12.5 mof film for a full wrap

Volkswagen Derby, second generation, factory photo
Volkswagen Derby, second generation. Factory color shown.

Volkswagen Derby wrap colors and ideas

  • Derby black wrap
  • Derby white wrap
  • Derby gray wrap
  • Derby silver wrap
  • Derby red wrap
  • Derby blue wrap
  • Derby green wrap
  • Derby yellow wrap
  • Derby orange wrap
  • Derby purple wrap
  • Derby pink wrap
  • Derby teal wrap
  • Derby brown wrap
  • Derby gold wrap
  • Derby chrome wrap
  • Derby color shift wrap
  • Derby carbon fiber wrap
  • Derby camo and patterned wrap

How much vinyl to wrap a Volkswagen Derby

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1984coupe (2 doors)152.2 in (3,866 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1977–1981coupe (2 doors)152.2 in (3,866 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Derby wrap cost factors

Derby wrap cost depends on the amount of film, the film type, and the condition of the paint. This car needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film pushes the estimate to about 52 ft (16 m). Labor time can rise if old paint needs extra prep before the wrap.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Derby wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen Derby, second generation, factory photo
Factory color shown

1981–1984 Derby coupe (second generation)

1981–1984coupe (2 doors)152.2 in (3,866 mm)

On a second-generation Volkswagen Derby from 1981–1984, paint age is a key factor before wrapping. Panels may be original or repainted, and a test spot comes before a full wrap. If the paint is weak, removing old film or repairing chips adds time. A test patch tells you how the adhesive will grip the surface.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Volkswagen Derby, first generation, factory photo
Factory color shown

1977–1981 Derby coupe (first generation)

1977–1981coupe (2 doors)152.2 in (3,866 mm)

The first-generation Volkswagen Derby (1977–1981) has the same subcompact coupe body as the later model. Its two long side doors mean each door is one large piece of film. At 152.2 in (3,866 mm) long, the car panels are small enough to handle without extra seams. You can plan on the same film estimate as the second generation.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Derby

A partial wrap on a Derby can include the roof, hood, or mirror caps. Derby chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volkswagen Derby: body, cut-outs and film

A Volkswagen Derby vinyl wrap starts with a two-door body that is 152.2 in (3,866 mm) long. Both generations share the same footprint, so your material estimate stays consistent. The subcompact size keeps the job on the smaller side, with fewer square feet to cover than a larger sedan.

Derby wrap ideas begin with its two long side doors, and each door is one large piece of film. You will cut out the door handles, locks, and side mirrors. Badges and trim can be removed for a cleaner finish around the edges.

If you need to know how much vinyl to wrap a Derby, check the model years first. The second generation (1981–1984) and the first generation (1977–1981) have identical body shells. That means the same film quantity applies to both generations.

Questions about wrapping a Volkswagen Derby

How much vinyl does it take to wrap a Volkswagen Derby?

A full wrap of a Volkswagen Derby takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan on about 52 ft (16 m). These figures are based on the newest body in the catalog.

Can I wrap only the hood or the roof of a Derby?

Yes, you can wrap only the hood or the roof of a Derby. A partial wrap on this car typically includes the roof, hood, or mirror caps. Chrome delete is another option for the window trim and badges. Paint protection film can be applied just to the front end.

Is a Derby hard to wrap?

A Derby is not especially hard to wrap, but its two long doors require large single pieces of film. The subcompact size means fewer panels to cover than a bigger car. Door handles, locks, and mirror cut-outs add some detail work.

How many generations of the Derby does this page cover?

This page covers two generations of the Volkswagen Derby. The first generation ran from 1977 to 1981, and the second from 1981 to 1984. Both share the same two-door coupe body and film requirements.