Wraps by car

Volkswagen Iltis wrap

This page covers the Volkswagen Iltis wrap, a vinyl wrap project for a compact open-top SUV. The catalog shows one generation of the Iltis, produced from 1978 to 1988. A full wrap of this body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

Volkswagen Iltis, first generation, factory photo
Volkswagen Iltis, first generation. Factory color shown.

Volkswagen Iltis wrap colors and ideas

  • Iltis black wrap
  • Iltis white wrap
  • Iltis gray wrap
  • Iltis silver wrap
  • Iltis red wrap
  • Iltis blue wrap
  • Iltis green wrap
  • Iltis yellow wrap
  • Iltis orange wrap
  • Iltis purple wrap
  • Iltis pink wrap
  • Iltis teal wrap
  • Iltis brown wrap
  • Iltis gold wrap
  • Iltis chrome wrap
  • Iltis color shift wrap
  • Iltis carbon fiber wrap
  • Iltis camo and patterned wrap

How much vinyl to wrap a Volkswagen Iltis

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1978–1988open-top SUV (3 doors)153.0 in (3,887 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Iltis wrap cost factors

Iltis wrap cost depends on the film length, the film type, and the labor for a tall open-top body. A full wrap uses about 43 ft (13 m) of 60-inch (1.52 m) cast film, or 49 ft (15 m) of chrome or patterned film. The 72.3 in (1,837 mm) height adds time because the roof is wrapped from a platform.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: open-top SUV (3 doors).
  • Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (72.3 in (1,837 mm)): the roof is wrapped from a platform.

Iltis wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen Iltis, first generation, factory photo
Factory color shown

1978–1988 Iltis open-top SUV (first generation)

1978–1988open-top SUV (3 doors)153.0 in (3,887 mm)

The first generation Volkswagen Iltis has an open top that stays unwrapped. The fabric top is left in place, and the vinyl film ends at the edge where the top begins. A folding hard top is treated as its own set of panels, wrapped separately without covering the fabric sections.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (72.3 in (1,837 mm)): the roof is wrapped from a platform.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on an Iltis

Iltis chrome delete covers the window trim and badges with black film. A partial wrap on this SUV can cover the hood, mirror caps, or tailgate. Paint protection film (PPF), a clear film, is applied to the front end to shield the nose and leading edges.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volkswagen Iltis: body, cut-outs and film

A Volkswagen Iltis vinyl wrap follows the shape of a short open-top SUV body. The vehicle is 153.0 in (3,887 mm) long, so every panel wrap uses straight, manageable pieces. The tall body, at 72.3 in (1,837 mm), means you need a platform to wrap the roof comfortably.

Iltis wrap ideas start with the open-top design and the tailgate. The fabric top is not wrapped, and film ends cleanly where it meets the top edges. If the Iltis has a folding hard top, the panels of that hard top are wrapped as separate pieces. The tailgate wraps up to the edge of the rear glass, leaving the glass clear.

For how much vinyl to wrap an Iltis, use the estimate for this first and only generation. A full color change wrap of the body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, plan for about 49 ft (15 m) to match the pattern and trim work.

Questions about wrapping a Volkswagen Iltis

How much vinyl does it take to wrap a Volkswagen Iltis?

A full wrap of a Volkswagen Iltis takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, you will need about 49 ft (15 m) to cover the same body.

Is the top of an Iltis wrapped?

The top of an Iltis is not wrapped. The fabric top is left as it is, and the vinyl film stops at the edge where the top meets the body.

Can I wrap only the hood or the roof of an Iltis?

Yes, you can wrap only the hood or the roof of an Iltis. A partial wrap for this SUV covers the hood, mirror caps, or tailgate, with the roof as an optional single panel.

Is an Iltis hard to wrap?

An Iltis takes extra work to wrap because of its tall open-top body. The 72.3 in (1,837 mm) height means you need a platform for the roof, and the fabric top must be masked off carefully. The tailgate also requires film to end exactly at the glass edge.