Wraps by car

Volkswagen K70 wrap

The Volkswagen K70 wrap page covers one generation of the four-door sedan and the film it takes to wrap it. The K70 was produced from 1970 to 1974 and is the only generation in the catalog. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 64 ft (19.5 m).

1generations16.5 mof film for a full wrap

Volkswagen K70, first generation, factory photo
Volkswagen K70, first generation. Factory color shown.

Volkswagen K70 wrap colors and ideas

  • Volkswagen K70 black wrap
  • Volkswagen K70 white wrap
  • Volkswagen K70 gray wrap
  • Volkswagen K70 silver wrap
  • Volkswagen K70 red wrap
  • Volkswagen K70 blue wrap
  • Volkswagen K70 green wrap
  • Volkswagen K70 yellow wrap
  • Volkswagen K70 orange wrap
  • Volkswagen K70 purple wrap
  • Volkswagen K70 pink wrap
  • Volkswagen K70 teal wrap
  • Volkswagen K70 brown wrap
  • Volkswagen K70 gold wrap
  • Volkswagen K70 chrome wrap
  • Volkswagen K70 color shift wrap
  • Volkswagen K70 carbon fiber wrap
  • Volkswagen K70 camo and patterned wrap

How much vinyl to wrap a Volkswagen K70

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1970–1974sedan (4 doors)175.4 in (4,455 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Volkswagen K70 wrap cost factors

Volkswagen K70 wrap cost depends on the size of the sedan, the film type, and the condition of the paint. This car is 175.4 in (4,455 mm) long, so a full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the material amount to about 64 ft (19.5 m). The installer also charges more if old paint needs cleaning, filling, or priming before the wrap.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Volkswagen K70 wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen K70, first generation, factory photo
Factory color shown

1970–1974 Volkswagen K70 sedan (first generation)

1970–1974sedan (4 doors)175.4 in (4,455 mm)

The first generation Volkswagen K70 was made from 1970 to 1974 as a four-door sedan. Paint age on a car of these years means panels may be original or repainted, and a test spot comes before a full wrap. The body length is 175.4 in (4,455 mm), which sets the amount of film needed. A full wrap of this generation takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Volkswagen K70

The Volkswagen K70 can receive smaller jobs when a full wrap is not needed. A partial wrap of the roof, hood, or mirror caps changes the look with less material. Chrome delete covers the window trim and badges with black film for a different finish. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volkswagen K70: body, cut-outs and film

The Volkswagen K70 vinyl wrap is sized for the sedan body, which is 175.4 in (4,455 mm) long. This four-door sedan has no separate wagon or coupe version, so one set of measurements covers every car. The length means a full wrap uses about 54 ft (16.5 m) of film on the painted panels. Knowing the size helps you plan for material and avoid buying more vinyl than needed.

Volkswagen K70 wrap ideas include covering the large flat sides and the roof, but several parts need care. The door handles, window trim, and badges must be removed or cut around for a clean result. The front and rear bumpers are separate pieces that can be wrapped on the car or off. The mirrors also come off for a better edge on the film.

How much vinyl to wrap a Volkswagen K70 depends on the only generation made, from 1970 to 1974. The sedan body stayed the same over those years, so the film length does not change between early and late cars. You still measure each panel before ordering, because repairs or past work can alter the surface. The estimate of about 54 ft (16.5 m) of cast film gives you a starting point.

Questions about wrapping a Volkswagen K70

How much vinyl does it take to wrap a Volkswagen K70?

A full wrap of the Volkswagen K70 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That figure comes from the estimate for the newest body, which is the only generation in the catalog. If you choose chrome or patterned film, the amount rises to about 64 ft (19.5 m). Order a little extra for testing and trimming, since old panels may need repair.

Can I wrap only the hood or the roof of a Volkswagen K70?

Yes, you can wrap only the hood or the roof of a Volkswagen K70 as a partial wrap. The partial jobs on this car include the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges with black film. Paint protection film (PPF) is another option to cover just the front end with clear film.

Is a Volkswagen K70 hard to wrap?

A Volkswagen K70 is not the hardest car to wrap, but its age and trim add work. The sedan is 175.4 in (4,455 mm) long, so the large roof and hood need careful handling. Door handles, window trim, and badges must be removed or cut around for a clean finish. Paint may be original or repainted, and a test spot is needed before a full wrap.

How many generations of the Volkswagen K70 does this page cover?

This page covers one generation of the Volkswagen K70, the first generation. The car was produced from 1970 to 1974 as a four-door sedan. No other generations are in the catalog, so all wrap estimates on this page refer to that single body style.