Wraps by car

Volkswagen Passat (USA) wrap

The Volkswagen Passat (USA) wrap covers the 2011–2021 mid-size sedan. This catalog has one generation of the Passat built for North America. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. The car was restyled in 2015 and 2019, so film cuts differ between versions.

1generations18 mof film for a full wrap

Volkswagen Passat (USA), first generation, factory photo
Volkswagen Passat (USA), first generation. Factory color shown.

Volkswagen Passat (USA) wrap colors and ideas

  • Passat (USA) black wrap
  • Passat (USA) white wrap
  • Passat (USA) gray wrap
  • Passat (USA) silver wrap
  • Passat (USA) red wrap
  • Passat (USA) blue wrap
  • Passat (USA) green wrap
  • Passat (USA) yellow wrap
  • Passat (USA) orange wrap
  • Passat (USA) purple wrap
  • Passat (USA) pink wrap
  • Passat (USA) teal wrap
  • Passat (USA) brown wrap
  • Passat (USA) gold wrap
  • Passat (USA) chrome wrap
  • Passat (USA) color shift wrap
  • Passat (USA) carbon fiber wrap
  • Passat (USA) camo and patterned wrap

How much vinyl to wrap a Volkswagen Passat (USA)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2021sedan (4 doors)191.6 in (4,867 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Passat (USA) wrap cost factors

The Passat (USA) wrap cost depends on the film you choose and the condition of the paint. The car needs about 59 ft (18 m) of cast film for a full color change, or about 69 ft (21 m) for chrome or patterned film. A car with deep scratches or stone chips needs more prep work before the film goes on. Removing the door handles and mirrors adds labor time.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Restyled in 2015, 2019: bumpers and lights differ between the versions, and so do the film cuts.

Passat (USA) wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen Passat (USA), first generation, factory photo
Factory color shown

2011–2021 Passat (USA) sedan (first generation)

2011–2021sedan (4 doors)191.6 in (4,867 mm)

The first generation Passat (USA) was built from 2011 to 2021 as a four-door sedan. The car was restyled in 2015 and 2019, changing the bumpers and lights. Film cut for one version does not fit the other two versions. A full wrap of this generation takes about 59 ft (18 m) of 60-inch (1.52 m) film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Passat (USA)

A partial wrap on the Passat (USA) covers the roof, hood, or mirror caps. A Passat (USA) chrome delete covers the bright window trim and badges with black film. Paint protection film (PPF) is applied as a clear film on the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volkswagen Passat (USA): body, cut-outs and film

The Volkswagen Passat (USA) vinyl wrap fits one body style: a four-door sedan. The car is 191.6 in (4,867 mm) long, which is a typical mid-size sedan length. This size keeps the wrap job straightforward for one installer. The flat roof and large hood panels allow the film to lay down with minimal stretching.

Passat (USA) wrap ideas often include covering the chrome window trim and badges. The door handles, mirror caps, and antenna base come off for a cleaner edge. The front and rear bumpers need relief cuts around the parking sensors and tow hook covers. The grille and headlights have tight recesses that call for careful knifeless tape work.

How much vinyl to wrap a Passat (USA) depends on which version you have. The pre-2015 cars have different bumper and light shapes from the 2015–2018 cars. The 2019–2021 restyle changed the front and rear fascias again. Count film for the exact year of the car, because a bumper cut from one version does not fit the others.

Questions about wrapping a Volkswagen Passat (USA)

How much vinyl does it take to wrap a Volkswagen Passat (USA)?

A full Volkswagen Passat (USA) wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl film. Use about 69 ft (21 m) for chrome or patterned film. The estimate includes the roof, hood, trunk, doors, fenders, and bumpers of the sedan body.

Which years of the Passat (USA) take the same film cuts?

The 2011–2014 Passat (USA) models share one set of film cuts. The 2015–2018 models share another set after the first restyle. The 2019–2021 models share a third set after the second restyle. Each restyle changed the bumpers and lights, so the cuts do not carry over.

Can I wrap only the hood or the roof of a Passat (USA)?

Yes, you can wrap only the hood or the roof of a Passat (USA). A partial wrap often covers the roof, hood, or mirror caps. These sections take less film than a full wrap and are good first projects for a garage installer.

Is a Passat (USA) hard to wrap?

A Passat (USA) is not a hard car to wrap, but it has a few areas that add work. The front bumper has parking sensor holes and a large lower grille that need precise relief cuts. The door handles and mirrors are straightforward to remove for a neat edge. The car is 191.6 in (4,867 mm) long, so a full wrap takes a full day or more.