Wraps by car

Volkswagen Type 1 wrap

The Volkswagen Type 1 wrap covers the convertible and coupe body styles of this subcompact car. The page describes one generation in the catalog, produced from 1938 to 2003. A full vinyl wrap of the newest body takes about 43 ft (13 m) for the convertible to 48 ft (14.5 m) for the coupe with 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

Volkswagen Type 1, first generation, factory photo
Volkswagen Type 1, first generation. Factory color shown.

Volkswagen Type 1 wrap colors and ideas

  • Type 1 black wrap
  • Type 1 white wrap
  • Type 1 gray wrap
  • Type 1 silver wrap
  • Type 1 red wrap
  • Type 1 blue wrap
  • Type 1 green wrap
  • Type 1 yellow wrap
  • Type 1 orange wrap
  • Type 1 purple wrap
  • Type 1 pink wrap
  • Type 1 teal wrap
  • Type 1 brown wrap
  • Type 1 gold wrap
  • Type 1 chrome wrap
  • Type 1 color shift wrap
  • Type 1 carbon fiber wrap
  • Type 1 camo and patterned wrap

How much vinyl to wrap a Volkswagen Type 1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1938–2003convertible, coupe (2 doors)159.8 in (4,060 mm)about 43 ft (13 m) for the convertible to 48 ft (14.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Type 1 wrap cost factors

Type 1 wrap cost depends on the body style, the film type, and the amount of surface to cover. A coupe needs more material than a convertible, about 48 ft (14.5 m) versus 43 ft (13 m) of 60-inch (1.52 m) cast film. The installer's time and the number of parts to remove also affect the final figure. For a convertible, the fabric top is left unwrapped, which changes the work quoted.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 48 ft (14.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Type 1 wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen Type 1, first generation, factory photo
Factory color shown

1938–2003 Type 1 convertible, coupe (first generation)

1938–2003convertible, coupe (2 doors)159.8 in (4,060 mm)

The open top of the first generation Volkswagen Type 1 is not wrapped when it is a fabric roof. On a convertible, the film ends where the fabric begins, so the soft top keeps its original appearance. If the car has a folding hard top, that top is covered as separate panels of film. The two long side doors are each wrapped in one large piece.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 48 ft (14.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Type 1

A Type 1 chrome delete covers bright window trim and badges with black film. For a smaller job than a full wrap, you can choose a partial wrap on the roof, hood, or mirror caps. Paint protection film (PPF) is another option: a clear film applied to the front end. These choices let you change the look of one part of the car at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volkswagen Type 1: body, cut-outs and film

The Volkswagen Type 1 vinyl wrap follows the simple, compact shape of this subcompact car. The body measures 159.8 in (4,060 mm) long, and the two-door styles keep the side surface unbroken except for the door gaps. A wrap installer uses about 43 ft (13 m) of 60-inch (1.52 m) cast film for the convertible and up to 48 ft (14.5 m) for the coupe. The film is cut to fit the curved sections without excessive waste.

Type 1 wrap ideas start with covering the two long side doors, each of which is one large piece of film. The convertible body has a fabric top that is not wrapped and the film ends where the fabric begins. A folding hard top, when present, is wrapped as its own separate panels. The installer also works around the small grilles, lights, and trim outlines.

How much vinyl to wrap a Type 1 depends on the body style, with the coupe needing more film than the convertible. A coupe uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while a convertible uses about 43 ft (13 m) because the fabric top is not covered. If you choose chrome or patterned film, order up to about 56 ft (17 m) to allow matching. The single generation catalogued for this car spans 1938 to 2003, but the film estimate is based on the newest body.

Questions about wrapping a Volkswagen Type 1

How much vinyl does it take to wrap a Volkswagen Type 1?

It takes about 43 ft (13 m) to 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap a Volkswagen Type 1. The lower figure is for the convertible, which leaves the fabric top unwrapped. The higher figure is for the coupe body style. If you use chrome or patterned film, plan for up to about 56 ft (17 m).

Is the top of a Type 1 wrapped?

No, the fabric top of a Type 1 convertible is not wrapped. The vinyl film ends where the fabric begins, so the soft top keeps its factory look. A folding hard top, when present, is wrapped as its own panels. This protects the paint on the hard surfaces without changing the fabric.

Which Type 1 body takes more film?

The coupe body of a Type 1 takes more film than the convertible. A coupe needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. A convertible uses about 43 ft (13 m) because the fabric top is not covered. The difference comes from the roof area that is only present on the coupe.

Can I wrap only the hood or the roof of a Type 1?

Yes, you can wrap only the hood or the roof of a Type 1 as a partial wrap. A partial wrap may also include the mirror caps. Another option is chrome delete, which covers window trim and badges with black film. Paint protection film is a clear film applied to the front end.