Wraps by car

Volkswagen Type 3 wrap

A Volkswagen Type 3 wrap can renew the look of every first-generation body, which was produced from 1961 to 1973. The catalog covers this one generation in convertible, coupe, sedan, and wagon forms. A full vinyl wrap of the newest body takes 60-inch (1.52 m) cast film, with an estimate of about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the sedan.

1generations13.5 mof film for a full wrap

Volkswagen Type 3, first generation, factory photo
Volkswagen Type 3, first generation. Factory color shown.

Volkswagen Type 3 wrap colors and ideas

  • Type 3 black wrap
  • Type 3 white wrap
  • Type 3 gray wrap
  • Type 3 silver wrap
  • Type 3 red wrap
  • Type 3 blue wrap
  • Type 3 green wrap
  • Type 3 yellow wrap
  • Type 3 orange wrap
  • Type 3 purple wrap
  • Type 3 pink wrap
  • Type 3 teal wrap
  • Type 3 brown wrap
  • Type 3 gold wrap
  • Type 3 chrome wrap
  • Type 3 color shift wrap
  • Type 3 carbon fiber wrap
  • Type 3 camo and patterned wrap

How much vinyl to wrap a Volkswagen Type 3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1961–1973convertible, coupe, sedan, wagon (2 or 3 or 4 doors)170.9 in (4,340 mm)about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Type 3 wrap cost factors

A Type 3 wrap cost is driven by the amount of material and the body style. The sedan needs the most film at around 52 ft (16 m), while the convertible takes less at about 44 ft (13.5 m). Using chrome or patterned film pushes the total toward 61 ft (18.5 m), which adds time for alignment. The number of doors and the condition of the paint also affect the preparation work.

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: convertible, coupe, sedan, wagon (2 or 3 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Type 3 wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen Type 3, first generation, factory photo
Factory color shown

1961–1973 Type 3 convertible, coupe, sedan, wagon (first generation)

1961–1973convertible, coupe, sedan, wagon (2 or 3 or 4 doors)170.9 in (4,340 mm)

The open top of a first-generation Volkswagen Type 3 is handled differently for each roof type. A fabric convertible top is not wrapped; the vinyl film ends where the fabric begins. A folding hard top is wrapped as its own set of panels, so the film follows the roof lines. The body below the top is covered normally, with no film on the glass or rubber seals.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Type 3

A partial wrap on a Type 3 covers only the roof, hood, mirror caps, or another single area. Type 3 chrome delete replaces the bright window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volkswagen Type 3: body, cut-outs and film

A Volkswagen Type 3 vinyl wrap follows the size and shape of each body style. The sedan is the largest Type 3 at 170.9 in (4,340 mm) long, so it needs the most film among the standard colors. The convertible body is closer to 44 ft (13.5 m) of film because its fabric top is left uncovered. The wagon and coupe fall between those figures, while the two- and four-door layouts change how the film is trimmed around the doors.

Type 3 wrap ideas must account for the parts that stay visible or come off. On a convertible with a folding hard top, the top is wrapped as its own panels, and the film ends where the fabric or metal meets the body. On a wagon, the tailgate includes the rear glass, so the film stops at the edge of the glass. Door handles, badges, and trim are removed for a clean edge, then reinstalled.

How much vinyl to wrap a Type 3 depends on the body style you own. The estimate for a standard color starts around 44 ft (13.5 m) on the convertible and reaches about 52 ft (16 m) on the sedan. If you choose chrome or patterned film, the same car can take up to about 61 ft (18.5 m) because of pattern matching. Since the Type 3 was built from 1961 to 1973 with only one generation, there is no later body to compare against.

Questions about wrapping a Volkswagen Type 3

How much vinyl does it take to wrap a Volkswagen Type 3?

A Volkswagen Type 3 takes about 44 ft (13.5 m) of 60-inch (1.52 m) film for the convertible body. The sedan needs more, around 52 ft (16 m) of the same width. If you choose chrome or patterned film, the total can reach about 61 ft (18.5 m). These figures cover a full wrap of the newest body styles.

Is the top of a Type 3 wrapped?

The top of a Type 3 is not wrapped when it is a fabric convertible top. The film ends where the fabric begins. A folding hard top is wrapped as separate panels. The windshield frame and other metal parts around the top are covered normally.

Which Type 3 body takes more film?

The sedan body of the Type 3 takes more film than the convertible. A sedan needs about 52 ft (16 m), while a convertible takes about 44 ft (13.5 m). The wagon and coupe sit between those two amounts. All figures use 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Type 3?

Yes, you can wrap only the hood or the roof of a Type 3. A partial wrap covers any single area you choose, such as the hood, roof, or mirror caps. Chrome delete is another option for the window trim and badges. Paint protection film (PPF) can also be applied just to the front end.