Wraps by car

Volkswagen Vento wrap

The Volkswagen Vento wrap page covers the first generation sedan produced from 1991 to 1998. A full vinyl wrap of this car takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 61 ft (18.5 m).

1generations15 mof film for a full wrap

Volkswagen Vento, first generation, factory photo
Volkswagen Vento, first generation. Factory color shown.

Volkswagen Vento wrap colors and ideas

  • Vento black wrap
  • Vento white wrap
  • Vento gray wrap
  • Vento silver wrap
  • Vento red wrap
  • Vento blue wrap
  • Vento green wrap
  • Vento yellow wrap
  • Vento orange wrap
  • Vento purple wrap
  • Vento pink wrap
  • Vento teal wrap
  • Vento brown wrap
  • Vento gold wrap
  • Vento chrome wrap
  • Vento color shift wrap
  • Vento carbon fiber wrap
  • Vento camo and patterned wrap

How much vinyl to wrap a Volkswagen Vento

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1998sedan (4 doors)172.4 in (4,380 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Vento wrap cost factors

Vento wrap cost depends on the size of the car, the film type, and the condition of the paint. The first-generation sedan is 172.4 in (4,380 mm) long and needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film raises the amount to about 61 ft (18.5 m).

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Vento wraps by generation

Swipe sideways. Tap a card for the full description.

Volkswagen Vento, first generation, factory photo
Factory color shown

1991–1998 Vento sedan (first generation)

1991–1998sedan (4 doors)172.4 in (4,380 mm)

The first generation Volkswagen Vento was built from 1991 to 1998, so paint age varies between original and repainted panels. A test spot tells whether the old paint can hold the film before a full wrap is cut. A wrap shop checks adhesion on each panel because paint condition changes the result.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Vento

A partial wrap on a Vento covers the roof, hood, or mirror caps as separate jobs. A chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end to shield it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volkswagen Vento: body, cut-outs and film

A Volkswagen Vento vinyl wrap covers one body style: a four-door sedan measuring 172.4 in (4,380 mm) long. The clean sedan shape keeps panel count moderate for a compact car. The wrap installer works with four doors, a trunk lid, and standard bumpers without wide arches.

Vento wrap ideas often start with the parts that need cut-outs or come off. Door handles, mirrors, trim, and badges are removed or masked for a clean edge. A chrome delete covers window trim and badges with black film. A partial wrap can change just the roof, hood, or mirror caps.

To know how much vinyl to wrap a Vento, check the generation because this page covers only the first generation. The 1991–1998 sedan is the sole body style in the catalog. There are no later generations with different lengths or shapes to compare.

Questions about wrapping a Volkswagen Vento

How much vinyl does it take to wrap a Volkswagen Vento?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Volkswagen Vento. Chrome or patterned film needs about 61 ft (18.5 m). The estimate is for the first generation sedan produced from 1991 to 1998.

Can I wrap only the hood or the roof of a Vento?

Yes, you can wrap only the hood or the roof of a Vento. A partial wrap on this car covers the roof, hood, or mirror caps. The installer can also do a chrome delete on window trim and badges.

Is a Vento hard to wrap?

A Vento is not hard to wrap, but the four doors and trunk lid add work. Door handles, mirrors, trim, and badges are removed or masked for clean edges. The car is 172.4 in (4,380 mm) long, which is a compact sedan size.

How many generations of the Vento does this page cover?

This page covers one generation of the Vento: the first generation produced from 1991 to 1998. That generation is a four-door sedan. The catalog has no other Vento generations.