Matte PPF is paint protection film (PPF) with a flat top coat that makes gloss paint matte. The same film guards the paint against chips, and on factory matte paint it keeps the flat look. The catalog on this site lists matte PPF from several makers next to 656 matte films in all.

Key facts

  • Matte PPF gives gloss paint a flat finish and protects it from chips at the same time.
  • Among makers that list only PPF in the catalog, STEK and SunTek each show two matte films.
  • Matte film cannot be polished, waxed or buffed, because shine would change the finish for good.
  • A coating for matte PPF must be one made for matte surfaces, not an ordinary gloss coating.
  • A full sedan in PPF takes about 15 m (49 ft) of 1.52 m wide film by the site calculator.

What matte PPF looks like on a car

Matte PPF removes the mirror-like reflections of gloss paint and leaves a soft, even surface. Body lines read through shading instead of highlights, and colors look slightly deeper and calmer.

Matte PPF on a white car gives a chalky, ceramic-like white with no glare. On black or dark gray, the film gives a stealth look that hides small reflections and waves.

Metallic and pearl paints keep their flake under matte film, but the sparkle softens. Look at a sample panel outdoors, since indoor light flattens the difference.

Two jobs for one matte film

Matte PPF does one of two jobs, depending on the paint underneath. Over gloss paint, it works as a reversible finish change with chip protection added.

Over factory matte paint, the film protects a finish that is hard to repair. Matte paint cannot be spot-polished, so a scratch often means repainting a whole panel.

Either way, the film can later come off and return the car to its original finish. Removal on sound factory paint is a job for the installer, not for a scraper.

Matte PPF film in the catalog

Matte PPF film is listed by several makers in the catalog, often beside gloss and satin film. The table shows makers that list only paint protection film, with their matte count.

Names in the catalog include STEK DYNOmatte, STEK DYNOmatte-flat, SunTek Ultra Matte and SunTek PPF M. Larger makers also carry matte film within their color PPF ranges. Compare matte samples from more than one maker, since the depth of flatness varies.

ManufacturerMatte filmsAll PPF films in the catalog
STEK24
SunTek25
LLumar116
GSWF153

Is matte PPF hard to care for

Matte PPF is not hard to care for, but it asks for different habits than gloss. The flat top coat must never be polished, waxed or machine buffed.

Oily marks such as fingerprints, bug remains and fuel drips show more on matte film. Remove them soon with a matte-safe cleaner and a soft cloth.

Use a car shampoo without gloss enhancers, wax or fillers of any kind. The guide on washing a car with PPF gives the full washing routine step by step.

  • Rinse loose grit off before any contact with the film.
  • Use a soft mitt and light pressure, with no circular scrubbing.
  • Blot bird droppings with a damp cloth rather than wiping them across the film.
  • Skip spray waxes, quick detailers with gloss and any polish.

Coating matte PPF without adding shine

A coating suits matte PPF only if it is made for matte surfaces. A gloss coating can leave a satin sheen on the film that cannot be removed.

A matte coating makes water bead and grime rinse off without changing the flat look. Ask the film maker which coatings suit its top coat before you buy one.

The order stays the same as on gloss paint: film first, coating on top. The guide on PPF or ceramic coating explains why the order matters.

Ordering matte PPF by the roll

A matte PPF roll is sold in the same widths as other film, and width changes the job. The site lists rolls of 1.52 m (60 in), 1.37 m (54 in) and 1.22 m (48 in).

On a roll narrower than 1.52 m, wide panels need two strips with a seam between them. A seam on a flat matte hood is easy to see in low sunlight.

Order all film for one car from the same batch to keep the sheen even across panels. The film calculator on this site counts matte film by body type and roll width.

What a matte PPF wrap costs depends on

Matte PPF wrap cost depends on coverage, body shape, paint prep and the film chosen. A full car in matte film is a larger job than a hood and front bumper.

Matte film shows seams and edges more than gloss film, so careful planning adds labor. Ask installers to quote the same matte film by its catalog name.

Questions

What does matte PPF look like?

Matte PPF looks like a flat factory paint with soft shading and no reflections. On white it reads as chalky and calm, and on dark colors it looks stealthy. Flake in metallic paint stays visible under the film but sparkles less.

How much does a full matte PPF cost?

The cost of a full matte PPF job depends on body size, body shape, paint correction and labor. Large vehicles need more film, and complex bumpers need more time. Compare quotes for the same film and the same coverage.

Is matte wrap hard to maintain?

A matte wrap is not hard to maintain once you drop polish and wax from your routine. Matte vinyl and matte PPF follow the same care rules. Matte PPF has a protective top coat, while matte vinyl marks more easily.

Can I ceramic coat matte PPF?

Yes, you can ceramic coat matte PPF with a coating made for matte surfaces. The coating keeps oily marks and bug remains from sticking to the flat top coat. Test it on a hidden spot first to confirm the sheen stays flat.