A printed car wrap is a design printed onto white wrap vinyl and sealed with clear laminate. Color film works differently, because its color is made into the film itself. That difference shapes the look, the finishes on offer and how the job is planned.

Key facts

  • A printed wrap can carry any image, while color film carries one color or effect.
  • Printed vinyl needs a clear laminate on top to protect the ink and set the finish.
  • The catalog on this site lists 2 printed films among its 4,686 films.
  • The film calculator puts a sedan full wrap in cast vinyl at 17.5 m (57 ft).

How a printed vinyl wrap is made

A printed vinyl wrap starts as plain white film that runs through a wide-format printer. The printer lays the design in ink across the whole width of the roll. After the ink dries, a clear laminate film is bonded over the print. The laminate guards the ink from scuffs and sunlight while setting the final sheen.

The design is printed as long strips, each sized to one part of the car. An installer lines the strips up on the body so the design flows across gaps. Lettering is kept clear of door handles, deep recesses and panel edges.

Printed wrap or color film: the main differences

Color film is made in one color or effect, so the whole roll looks the same. Any image can go on a printed wrap, from a photo to a company logo. Color film offers effects that ink cannot copy, such as mirror chrome, glitter and color shift.

Seams and overlaps behave differently on the two kinds of film. With color film, a small overlap disappears into the same color. With a printed design, every strip must line up so the picture stays whole.

PointPrinted wrapColor film
Where the color comes fromInk printed on white vinylMade into the film
Surface protectionClear laminate on topFinish built into the film
Design freedomAny image, logo or textOne color or effect per roll
Films in this catalog2 printed films1,996 gloss, 656 matte, 583 satin and more

What a custom printed car wrap involves

A custom printed car wrap begins with a design drawn to fit the exact model. The designer works from a scaled outline of the car and its production years. The guide to designing a car wrap on this site covers templates and software.

Before printing, the shop measures the real car and checks the outline against it. A proof on screen shows where each strip starts and ends. Approving that proof before printing saves the reprint of a whole panel.

Printed vinyl wrap rolls, sheets and laminate

Printed vinyl wrap rolls are printed to order, so each roll carries one design. Printed vinyl wrap sheets are smaller pieces for a hood, a door or a decal. Wrap film comes on rolls 60 inches (1.52 m) wide, and print runs follow that width.

The laminate decides how the printed film looks once it is on the car. A gloss laminate gives depth to colors, while a matte laminate cuts reflections. Choose the laminate on a printed sample held next to the car in daylight.

Film amounts for a printed vehicle wrap

The film calculator on this site counts film for a full wrap by body type. Its cast vinyl figures give a fair starting point for planning a printed vehicle wrap. A printed design needs strips that match, so ask the print shop to confirm the final length.

The figures below come from the calculator for a 1.52 m roll. Each figure is rounded up to 0.5 m and includes spare for one re-cut panel.

Body typeCast vinyl, full wrap
Coupe15 m (49 ft)
Hatchback16.5 m (54 ft)
Sedan17.5 m (57 ft)
Wagon17.5 m (57 ft)
SUV19 m (62 ft)

What a printed car wrap cost depends on

The cost of a printed car wrap depends first on the size of the car. Design work, print media, laminate and installation time each add their own share. A design with many matched strips takes longer to install than a plain color.

The life of a printed wrap depends on the print media, the ink and the laminate. Sun exposure, washing habits and where the car is parked matter just as much. Ask the shop which media and laminate it uses, then compare printed samples.

Questions

What is a printed car wrap?

A printed car wrap is white wrap vinyl with a design printed on it in ink. A clear laminate goes over the print before the film is applied. The result can show any image, logo or pattern across the car.

How much does a printed car wrap cost?

The cost depends on the size of the car, the design work, the print media and the laminate. Installation time grows with the number of strips that must line up exactly. A full design costs more to produce than lettering on color film.

Can I order custom printed vinyl wrap rolls?

Yes, a print shop can print your own design on wrap vinyl to order. Supply the artwork at full scale or as vector files, and agree on the laminate. Request a printed sample first to check colors against what you see on screen.

Should I choose a printed wrap or color film for my car?

Choose a printed wrap when the car must carry an image, a pattern or a logo. Choose color film for a single color or for effects like chrome, glitter or color shift. Both can be combined, with color film on the body and printed graphics on top.

Are printed vinyl wrap sheets enough for a hood or a door?

Yes, printed sheets suit single panels such as a hood, a door or a tailgate. Measure the panel and leave spare film at every edge before ordering. Wrap film is stretched and trimmed on the car, so a sheet cut to exact size falls short.

Films from this guide