Cast vs calendered vinyl differ in how the film is made, which changes how each behaves. Cast vinyl is poured as a liquid and follows deep curves with little pull-back. Calendered vinyl is rolled out from a heated mass and remembers its flat shape more.

Key facts

  • Cast film is made by spreading liquid vinyl onto a casting sheet and letting it set.
  • Calendered film is pressed between heated rollers into a sheet, which leaves tension in it.
  • The film calculator estimates 17.5 m (57 ft) of cast film and 18 m (59 ft) of calendered film for a sedan.
  • Calendered film suits flat or gently curved surfaces better than deep recesses.
  • The data sheet of each film line states whether the film is cast or calendered.

How cast vinyl is made

Cast vinyl starts as a liquid mix of PVC, pigment and softeners spread onto a casting sheet. The mix sets in an oven into a thin, relaxed film without stretch built into it. Because nothing pulls it into shape, the film has little urge to shrink back.

That relaxed state lets cast vinyl wrap film follow mirrors, bumpers and deep recesses. Cast film also holds its size well after trimming, so edges stay where the installer left them.

How calendered vinyl is made

Calendered vinyl is made from a heated, dough-like mass squeezed between polished rollers. The rollers press the mass thinner and thinner until it reaches the target sheet. The process leaves tension in the film, which tries to return toward its earlier shape.

Calendered film is generally thicker and stiffer to work around curves than cast film. On flat panels such as van sides or doors, calendered film can perform well. In deep recesses and around compound curves, the film tends to pull back and lift.

Difference between cast and calendered vinyl on a car

The difference between cast and calendered vinyl shows most on the shapes of a car body. Flat panels hide it, while mirrors, bumpers and door handle cups expose it quickly.

Whether cast or calendered vinyl is better depends on the surface and the job. For a full color change on curved panels, cast film is the safer choice. For flat lettering on a van side, calendered film can do the job.

  • Curves: cast film follows compound curves, calendered film suits flat and simple shapes.
  • Shrinkage: cast film stays put, calendered film tends to pull back from edges and recesses.
  • Handling: cast film softens readily under gentle heat, calendered film stays stiffer.
  • Use: cast film is made for full wraps, calendered film for flat graphics and short jobs.

Film needed for a full wrap by body type

Calendered film needs slightly more length for a full wrap in the site's film calculator. The table shows the estimates for a full wrap on a 1.52 m (60 in) roll.

The estimates are rounded up to 0.5 m and include spare film for one re-cut panel. Treat them as estimates, not a cutting plan for a specific car. The film calculator on this site counts film by body type, size, film type, roll width and coverage.

Body typeCast color-change vinylCalendered vinyl
Sedan17.5 m (57 ft)18 m (59 ft)
SUV19 m (62 ft)19.5 m (64 ft)
Hatchback16.5 m (54 ft)17 m (56 ft)
Coupe15 m (49 ft)15.5 m (51 ft)
Pickup21 m (69 ft)21.5 m (71 ft)
Minivan23 m (75 ft)23.5 m (77 ft)
Van27 m (89 ft)28 m (92 ft)

Cast vs calendered vinyl cost and what drives it

Cast vs calendered vinyl cost depends on the film line, the finish and the amount needed. Labor often matters as much as material, because film on curves takes time to lay well. A calendered film that pulls back on a curved panel must be redone, which adds labor.

Ask the installer which film line is planned and whether it is cast or calendered. The data sheet names the film type, and a careful installer will show it on request.

Finding the film type in the catalog

The catalog sorts films by manufacturer, series and finish rather than by production method. The series name is the key to finding the data sheet that names the film type. Examples include 3M Wrap Film Series 2080, ORACAL 970RA and HEXIS SKINTAC HX20000.

Specialty films such as chrome, carbon and patterned films follow their own rules. The film calculator adds extra length for them, since chrome marks easily and patterns must run one way.

Questions

Can you put decals on a vinyl wrap?

Yes, decals can go on top of a vinyl wrap if the wrap is clean and fully bonded. Use decals with an adhesive suited to vinyl and avoid strong solvents. Removing a decal later can lift the wrap beneath, so peel it slowly.

Is cast or calendered vinyl better for a car wrap?

Cast vinyl is the better match for a full car wrap with curves and recesses. Calendered vinyl suits flat surfaces, short jobs and simple graphics. The right choice follows the shape of the panels being covered.

What does cast vs calendered vinyl cost depend on?

The cost of either depends on the film line, the finish, the vehicle size and the labor involved. Calendered film needs a little more length per car in the film calculator. Redoing lifted film on curves adds labor that can outweigh any saving on material.

What are the downsides of calendered vinyl on a car?

Calendered vinyl tends to shrink back, which opens gaps at edges and lifts film in recesses. Stiffer handling makes compound curves such as mirrors hard to cover cleanly. The general downsides of wrapping are covered in a separate guide on this site.