Wraps by car

Austin Allegro wrap

The Austin Allegro wrap page covers all three generations of this compact British car, from the first in 1973 to the third ending in 1982. A full wrap of the newest sedan takes about 43 ft (13 m) of 60-inch (1.52 m) cast vinyl wrap. The longer wagon body needs up to 48 ft (14.5 m) of the same film.

3generations13 mof film for a full wrap

Austin Allegro, third generation, factory photo
Austin Allegro, third generation. Factory color shown.

Austin Allegro wrap colors and ideas

  • Allegro black wrap
  • Allegro white wrap
  • Allegro gray wrap
  • Allegro silver wrap
  • Allegro red wrap
  • Allegro blue wrap
  • Allegro green wrap
  • Allegro yellow wrap
  • Allegro orange wrap
  • Allegro purple wrap
  • Allegro pink wrap
  • Allegro teal wrap
  • Allegro brown wrap
  • Allegro gold wrap
  • Allegro chrome wrap
  • Allegro color shift wrap
  • Allegro carbon fiber wrap
  • Allegro camo and patterned wrap

How much vinyl to wrap an Austin Allegro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1979–1982sedan, wagon (2 or 3 or 4 doors)151.7 in (3,852 mm)about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1975–1979sedan, wagon (2 or 3 or 4 doors)151.7 in (3,852 mm)about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1973–1975sedan (2 or 4 doors)151.8 in (3,855 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Allegro wrap cost factors

Allegro wrap cost depends on the body style, the film type, and the condition of the panels. A wagon needs more film than a sedan, so material cost is higher. Chrome or patterned film costs more than a solid color, and a first-generation car may need extra prep if the paint is original.

  • Film for a full wrap: about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: sedan, wagon (2 or 3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Allegro wraps by generation

Swipe sideways. Tap a card for the full description.

Austin Allegro, third generation, factory photo
Factory color shown

1979–1982 Allegro sedan, wagon (third generation)

1979–1982sedan, wagon (2 or 3 or 4 doors)151.7 in (3,852 mm)

The third generation Austin Allegro, made from 1979 to 1982, came as a sedan or a wagon with two, three, or four doors. The choice of body style decides the panel plan and the film amount for a wrap. The wagon adds the tailgate and longer roof, so it uses more material than the sedan.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Austin Allegro, second generation, factory photo
Factory color shown

1975–1979 Allegro sedan, wagon (second generation)

1975–1979sedan, wagon (2 or 3 or 4 doors)151.7 in (3,852 mm)

On a second-generation Austin Allegro from 1975 to 1979, the paint may be original or repainted after years on the road. A test spot on each panel shows whether the vinyl will bond well. If the paint is weak, the wrap may lift or damage it when removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Austin Allegro, first generation, factory photo
Factory color shown

1973–1975 Allegro sedan (first generation)

1973–1975sedan (2 or 4 doors)151.8 in (3,855 mm)

The first-generation Austin Allegro, built from 1973 to 1975, is a compact sedan with two or four doors. At 151.8 in (3,855 mm) long, it has fewer panels than a wagon, so it needs less film. A full wrap takes about 43 ft (13 m) of 60-inch (1.52 m) cast film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an Allegro

An Allegro chrome delete covers the bright window trim and badges with black film, while a partial wrap can do the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Austin Allegro: body, cut-outs and film

An Austin Allegro vinyl wrap follows the body style of each generation, with sedans offered in two or four doors and later wagons in two, three, or four doors. The sedan measures 151.7 in (3,852 mm) long, while the first-generation sedan is 151.8 in (3,855 mm). Film amount changes with the number of panels and the extra rear bodywork of the wagon. A wagon wrap uses about 5 ft (1.5 m) more film than the sedan.

Allegro wrap ideas start with the tailgate on the wagon versions, where the rear glass is set into the tailgate itself. The film ends at the edge of the glass, so the installer trims around it cleanly. Door handles, mirrors, and badges need cut-outs or removal for a neat finish.

To know how much vinyl to wrap an Allegro, compare the first generation to the later cars. The 1973–1975 sedan needs about 43 ft (13 m) of 60-inch (1.52 m) cast film, but chrome or patterned film runs to about 54 ft (16.5 m). Later sedans take the same base amount, while wagons can need up to 48 ft (14.5 m) or 61 ft (18.5 m) for chrome or patterned film.

Questions about wrapping an Austin Allegro

How much vinyl does it take to wrap an Austin Allegro?

An Austin Allegro needs about 43 ft (13 m) of 60-inch (1.52 m) vinyl film for a full wrap of the sedan body. The wagon version takes up to 48 ft (14.5 m) because of the larger rear bodywork. Chrome or patterned film adds about 18 ft (5.5 m) for the sedan.

Which Allegro body takes more film?

The wagon body of the Austin Allegro takes more film than the sedan. A wagon wrap needs up to 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while a sedan needs about 43 ft (13 m). The extra length and the tailgate add about 5 ft (1.5 m) of material.

Can I wrap only the hood or the roof of an Allegro?

Yes, you can wrap only the hood or the roof of an Austin Allegro. A partial wrap can cover the roof, hood, or mirror caps, and a chrome delete handles the window trim and badges. Paint protection film (PPF) is also available for the front end.

Is an Allegro hard to wrap?

An Austin Allegro is not hard to wrap, but the wagon tailgate needs care because the rear glass is set into it. The film ends at the edge of the glass, so the installer trims around it precisely. The sedan is a simple shape, but a first-generation car from 1973–1975 may have paint that needs a test spot first.