Wraps by car

Austin FL2 wrap

This page covers the Austin FL2, a tall sedan built from 1958 to 1978, in one generation. A full vinyl wrap of the FL2 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film jobs need about 66 ft (20 m) of material.

1generations17.5 mof film for a full wrap

Austin FL2, first generation, factory photo
Austin FL2, first generation. Factory color shown.

Austin FL2 wrap colors and ideas

  • Austin FL2 black wrap
  • Austin FL2 white wrap
  • Austin FL2 gray wrap
  • Austin FL2 silver wrap
  • Austin FL2 red wrap
  • Austin FL2 blue wrap
  • Austin FL2 green wrap
  • Austin FL2 yellow wrap
  • Austin FL2 orange wrap
  • Austin FL2 purple wrap
  • Austin FL2 pink wrap
  • Austin FL2 teal wrap
  • Austin FL2 brown wrap
  • Austin FL2 gold wrap
  • Austin FL2 chrome wrap
  • Austin FL2 color shift wrap
  • Austin FL2 carbon fiber wrap
  • Austin FL2 camo and patterned wrap

How much vinyl to wrap an Austin FL2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1958–1978sedan (4 doors)180.3 in (4,580 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Austin FL2 wrap cost factors

Austin FL2 wrap cost depends on the amount of film, the number of cut-outs, and the height of the roof. A full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned film takes about 66 ft (20 m). The tall body adds labor time because the roof must be wrapped from a platform.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Austin FL2 wraps by generation

Swipe sideways. Tap a card for the full description.

Austin FL2, first generation, factory photo
Factory color shown

1958–1978 Austin FL2 sedan (first generation)

1958–1978sedan (4 doors)180.3 in (4,580 mm)

The first generation Austin FL2 has a body height of 69.7 in (1,770 mm), which is taller than many sedans. This height means the roof is wrapped from a platform, and that takes more time than wrapping a lower car. Installers plan the roof film in one or two large pieces to avoid stretching over the tall curves.

A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Austin FL2

Not every Austin FL2 job is a full wrap; a partial wrap of the roof, hood, or mirror caps uses less film. An Austin FL2 chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end guards the hood and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Austin FL2: body, cut-outs and film

The Austin FL2 vinyl wrap covers a sedan body with four doors and a length of 180.3 in (4,580 mm). This size makes a full color change wrap a large project that uses about 57 ft (17.5 m) of film. Installers plan the wrap in sections so the film lies flat on the long roof and doors.

Austin FL2 wrap ideas should include cut-outs for door handles, badges, and the four side windows. The roof height of 69.7 in (1,770 mm) means the installer works from a platform to reach the top surface. Removing trim such as window moldings can give cleaner edges on this tall body.

For someone counting film, the Austin FL2 has one generation only, so the material estimate stays the same across all years from 1958 to 1978. Production changes over that long run may affect the shape of bumpers or mirrors, but the main body dimensions do not change. One final figure of about 57 ft (17.5 m) of wrap film fits every FL2 sedan.

Questions about wrapping an Austin FL2

How much vinyl does it take to wrap an Austin FL2?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap an Austin FL2. Chrome or patterned film needs about 66 ft (20 m) because of the extra material used for trimming and matching.

Can I wrap only the hood or the roof of an Austin FL2?

Yes, you can wrap only the hood or the roof of an Austin FL2. A partial wrap covers the roof, hood, or mirror caps, and a chrome delete covers window trim and badges.

Is an Austin FL2 hard to wrap?

Yes, an Austin FL2 is harder to wrap than many cars because of its tall body. The roof sits 69.7 in (1,770 mm) high and is wrapped from a platform, which adds time and labor.

How many generations of the Austin FL2 does this page cover?

This page covers one generation of the Austin FL2, built from 1958 to 1978.