Wraps by car

Borgward Hansa 1100 / 1700 wrap

The Borgward Hansa 1100 / 1700 wrap section covers this pre-war sports car in its single generation. A full vinyl wrap of the 1934–1939 body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the material to roughly 49 ft (15 m).

1generations13 mof film for a full wrap

Borgward Hansa 1100 / 1700, first generation, factory photo
Borgward Hansa 1100 / 1700, first generation. Factory color shown.

Borgward Hansa 1100 / 1700 wrap colors and ideas

  • Hansa 1100 / 1700 black wrap
  • Hansa 1100 / 1700 white wrap
  • Hansa 1100 / 1700 gray wrap
  • Hansa 1100 / 1700 silver wrap
  • Hansa 1100 / 1700 red wrap
  • Hansa 1100 / 1700 blue wrap
  • Hansa 1100 / 1700 green wrap
  • Hansa 1100 / 1700 yellow wrap
  • Hansa 1100 / 1700 orange wrap
  • Hansa 1100 / 1700 purple wrap
  • Hansa 1100 / 1700 pink wrap
  • Hansa 1100 / 1700 teal wrap
  • Hansa 1100 / 1700 brown wrap
  • Hansa 1100 / 1700 gold wrap
  • Hansa 1100 / 1700 chrome wrap
  • Hansa 1100 / 1700 color shift wrap
  • Hansa 1100 / 1700 carbon fiber wrap
  • Hansa 1100 / 1700 camo and patterned wrap

How much vinyl to wrap a Borgward Hansa 1100 / 1700

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1934–1939convertible (2 doors)161.0 in (4,089 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Hansa 1100 / 1700 wrap cost factors

Hansa 1100 / 1700 wrap cost is driven by the film area, the chrome cut-outs and the body prep. The car's 43 ft (13 m) of film and the many bright parts add labor to every full wrap. The open convertible top reduces material use but demands careful masking along its edges.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Hansa 1100 / 1700 wraps by generation

Swipe sideways. Tap a card for the full description.

Borgward Hansa 1100 / 1700, first generation, factory photo
Factory color shown

1934–1939 Hansa 1100 / 1700 convertible (first generation)

1934–1939convertible (2 doors)161.0 in (4,089 mm)

The open top of the Borgward Hansa 1100 / 1700 is not wrapped when the body is covered. The fabric roof is left untouched and the vinyl edges stop exactly where the roof frame begins. A folding hard top is wrapped as a separate set of small panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Hansa 1100 / 1700

The Hansa 1100 / 1700 partial wrap options include the hood, mirror caps and rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as a clear layer on the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Borgward Hansa 1100 / 1700: body, cut-outs and film

A Borgward Hansa 1100 / 1700 vinyl wrap is shaped by the car's compact 161.0 in (4,089 mm) length and its single convertible body style. The two-door convertible body has large uninterrupted panels that make film alignment straightforward. The fenders and hood are curved but accessible for a skilled installer.

Hansa 1100 / 1700 wrap ideas start with the bright trim: window surrounds, grille and badges become cut-out points. The door handles and side mirrors are removed for cleaner edges on the doors and cowl. The bumpers come off when the wrap reaches the front and rear valances.

How much vinyl to wrap a Hansa 1100 / 1700 depends on the body length and the film width. The catalog lists the 1934–1939 generation at 161.0 in (4,089 mm), which fits a standard 60-inch (1.52 m) roll. A plain color change uses about 43 ft (13 m), while chrome or patterned film needs about 49 ft (15 m).

Questions about wrapping a Borgward Hansa 1100 / 1700

How much vinyl does it take to wrap a Borgward Hansa 1100 / 1700?

A full wrap of a Borgward Hansa 1100 / 1700 takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. If chrome or patterned film is used, plan for about 49 ft (15 m) instead.

Is the top of a Hansa 1100 / 1700 wrapped?

No, the fabric top of a Hansa 1100 / 1700 is not wrapped. The vinyl film ends where the soft top begins, leaving the roof material uncovered.

Can I wrap only the hood or the roof of a Hansa 1100 / 1700?

Yes, you can wrap only the hood or the rear deck of a Hansa 1100 / 1700. Mirror caps are also offered as a small partial wrap, and a chrome delete covers the window trim and badges.

Is a Hansa 1100 / 1700 hard to wrap?

Yes, a Hansa 1100 / 1700 is relatively hard to wrap because of its convertible body and many bright parts. The film must be trimmed cleanly around the fabric top, and the chrome pieces require extra cut-outs.