Wraps by car

Borgward Hansa 2400 wrap

The Borgward Hansa 2400 wrap page covers three generations of this full-size classic, from the first coupe of 1952–1955 to the third-generation sedan of 1957–1958. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. You can also plan around chrome accents, which add roughly 8 ft (2.5 m) to the estimate.

3generations18 mof film for a full wrap

Borgward Hansa 2400, third generation, factory photo
Borgward Hansa 2400, third generation. Factory color shown.

Borgward Hansa 2400 wrap colors and ideas

  • Hansa 2400 black wrap
  • Hansa 2400 white wrap
  • Hansa 2400 gray wrap
  • Hansa 2400 silver wrap
  • Hansa 2400 red wrap
  • Hansa 2400 blue wrap
  • Hansa 2400 green wrap
  • Hansa 2400 yellow wrap
  • Hansa 2400 orange wrap
  • Hansa 2400 purple wrap
  • Hansa 2400 pink wrap
  • Hansa 2400 teal wrap
  • Hansa 2400 brown wrap
  • Hansa 2400 gold wrap
  • Hansa 2400 chrome wrap
  • Hansa 2400 color shift wrap
  • Hansa 2400 carbon fiber wrap
  • Hansa 2400 camo and patterned wrap

How much vinyl to wrap a Borgward Hansa 2400

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1957–1958sedan (4 doors)189.4 in (4,810 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1955–1956sedan (4 doors)183.5 in (4,660 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1952–1955coupe (4 doors)175.6 in (4,460 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Hansa 2400 wrap cost factors

Hansa 2400 wrap cost depends on the generation, the condition of the paint, and how much chrome you cover. The first generation needs about 54 ft (16.5 m) of film, while the third needs about 59 ft (18 m), and chrome adds about 8 ft (2.5 m) more. Paint that is cracked or original on a 1950s car needs more prep than a fresh repaint. A partial wrap or chrome delete uses less film than a full color change.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Hansa 2400 wraps by generation

Swipe sideways. Tap a card for the full description.

Borgward Hansa 2400, third generation, factory photo
Factory color shown

1957–1958 Hansa 2400 sedan (third generation)

1957–1958sedan (4 doors)189.4 in (4,810 mm)

The third-generation Hansa 2400 is the largest body, at 189.4 in (4,810 mm) long, so a wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. Paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. The sedan has four doors and a long roof, so the installer works with more flat metal than on the coupe. Chrome or patterned film adds about 8 ft (2.5 m) to the total for this generation.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Borgward Hansa 2400, second generation, factory photo
Factory color shown

1955–1956 Hansa 2400 sedan (second generation)

1955–1956sedan (4 doors)183.5 in (4,660 mm)

The second-generation Hansa 2400 is 183.5 in (4,660 mm) long, which means a full wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The four-door sedan body has large flat sides and a full-length roof, so the panel count is the same as the third generation. A chrome wrap adds about 8 ft (2.5 m) for the bright trim, but the standard estimate already includes the main painted surfaces.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Borgward Hansa 2400, first generation, factory photo
Factory color shown

1952–1955 Hansa 2400 coupe (first generation)

1952–1955coupe (4 doors)175.6 in (4,460 mm)

The first-generation Hansa 2400 is a four-door coupe at 175.6 in (4,460 mm) long, so a full wrap needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The coupe shape gives it a shorter roof and a more sloped rear window than the later sedans, which changes the layout of the vinyl on the back half. The four doors still make up the largest panels, and chrome trim adds about 8 ft (2.5 m) if you cover it.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Hansa 2400

A partial wrap on a Borgward Hansa 2400 can cover the roof, the hood, or the mirror caps without wrapping the whole body. A Hansa 2400 chrome delete covers the window trim and the badges in black film, which uses far less material than a full color change. Paint protection film (PPF) is a clear urethane film applied to the front end, including the hood and fenders. All of these jobs can be done on any of the three generations.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Borgward Hansa 2400: body, cut-outs and film

The Borgward Hansa 2400 vinyl wrap changes with each body generation, because length and door count set the amount of film. The first generation is a 175.6 in (4,460 mm) four-door coupe, while the third is a 189.4 in (4,810 mm) sedan with the same door count. All three are full-size cars, so a wrap needs full rolls of 60-inch (1.52 m) film. The longer sedans use more material, and the coupe shape leaves less flat metal on the roof.

Hansa 2400 wrap ideas start with the large chrome grille and the bright window trim, which are often covered in black for a chrome delete. The door handles, mirror caps, and emblems come off for clean edges, and the wipers and trim around the glass may need cutting out. The front bumper is a separate piece that a wrap can cover or leave as a contrast. On any of the three bodies, the four doors are the biggest panels to line up.

How much vinyl to wrap a Hansa 2400 depends on which of the three generations you own, because the length grows from 175.6 in (4,460 mm) to 189.4 in (4,810 mm). The first-generation coupe takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, the second-generation sedan about 57 ft (17.5 m), and the third about 59 ft (18 m). A chrome or patterned film adds roughly 8 ft (2.5 m) to any of these estimates. The coupe has a shorter roof but a longer rear glass than the sedans.

Questions about wrapping a Borgward Hansa 2400

How much vinyl does it take to wrap a Borgward Hansa 2400?

A full vinyl wrap of a Borgward Hansa 2400 takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. The estimate is for the third-generation sedan from 1957–1958, which is the longest body, and it changes with the generation and with chrome or patterned film.

Can I wrap only the hood or the roof of a Hansa 2400?

Yes, you can wrap only the hood, the roof, or the mirror caps of a Hansa 2400. A partial wrap or a chrome delete uses far less film than a full color change, and paint protection film on the front end is another option from the partial jobs.

Is a Hansa 2400 hard to wrap?

A Hansa 2400 is a mid-century full-size car, and the large panels from 175.6 in (4,460 mm) to 189.4 in (4,810 mm) add work for a wrap. The chrome grille, bright window trim, and emblems need cut-outs or removal, and the four doors on every generation add time for alignment.

How many generations of the Hansa 2400 does this page cover?

This page covers three generations of the Borgward Hansa 2400: the first generation coupe of 1952–1955, the second generation sedan of 1955–1956, and the third generation sedan of 1957–1958.