Wraps by car

Borgward Hansa 1100 wrap

A Borgward Hansa 1100 wrap covers a subcompact classic with two generations in this catalog. The second generation from 1959–1961 and the first from 1958–1959 share a body near 161 inches long. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the sedan with 60-inch (1.52 m) cast film.

2generations13.5 mof film for a full wrap

Borgward Hansa 1100, second generation, factory photo
Borgward Hansa 1100, second generation. Factory color shown.

Borgward Hansa 1100 wrap colors and ideas

  • Hansa 1100 black wrap
  • Hansa 1100 white wrap
  • Hansa 1100 gray wrap
  • Hansa 1100 silver wrap
  • Hansa 1100 red wrap
  • Hansa 1100 blue wrap
  • Hansa 1100 green wrap
  • Hansa 1100 yellow wrap
  • Hansa 1100 orange wrap
  • Hansa 1100 purple wrap
  • Hansa 1100 pink wrap
  • Hansa 1100 teal wrap
  • Hansa 1100 brown wrap
  • Hansa 1100 gold wrap
  • Hansa 1100 chrome wrap
  • Hansa 1100 color shift wrap
  • Hansa 1100 carbon fiber wrap
  • Hansa 1100 camo and patterned wrap

How much vinyl to wrap a Borgward Hansa 1100

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1959–1961coupe, sedan, wagon (2 or 3 doors)161.4 in (4,100 mm)about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1958–1959coupe, sedan, wagon (2 or 3 doors)161.0 in (4,090 mm)about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

Hansa 1100 wrap cost factors

A Hansa 1100 wrap cost depends on the film amount, the body style, and the film type. The car needs about 44 to 51 ft (13.5 to 15.5 m) of standard cast film. Chrome or patterned film can need up to about 59 ft (18 m). Paint condition on a car of these years also affects the preparation work.

  • Film for a full wrap: about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: coupe, sedan, wagon (2 or 3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Hansa 1100 wraps by generation

Swipe sideways. Tap a card for the full description.

Borgward Hansa 1100, second generation, factory photo
Factory color shown

1959–1961 Hansa 1100 coupe, sedan, wagon (second generation)

1959–1961coupe, sedan, wagon (2 or 3 doors)161.4 in (4,100 mm)

The second generation Borgward Hansa 1100 from 1959–1961 comes in coupe, sedan, and wagon bodies. The coupe and sedan set the film amounts at about 44 to 51 ft (13.5 to 15.5 m). The wagon adds the tailgate with the rear glass, which the installer works around. This generation is 161.4 in (4,100 mm) long.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Borgward Hansa 1100, first generation, factory photo
Factory color shown

1958–1959 Hansa 1100 coupe, sedan, wagon (first generation)

1958–1959coupe, sedan, wagon (2 or 3 doors)161.0 in (4,090 mm)

A first generation Borgward Hansa 1100 from 1958–1959 may have original or repainted panels. Paint age affects how the vinyl adheres, so a test spot comes before a full wrap. The car is 161.0 in (4,090 mm) long with the same coupe, sedan, and wagon styles. The film requirement is the same as the second generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Hansa 1100

A partial wrap on a Borgward Hansa 1100 covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end. These jobs use less material than a full wrap and still change the look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Borgward Hansa 1100: body, cut-outs and film

The Borgward Hansa 1100 vinyl wrap starts with its coupe, sedan, and wagon styles in 2 or 3 doors. The body is subcompact at 161.4 in (4,100 mm) on the second generation and 161.0 in (4,090 mm) on the first. The style decides the panel plan and the film amount, as the coupe and sedan differ by about 7 ft (2 m) of vinyl. A wagon adds the tailgate area, where the film ends at the edge of the rear glass.

Hansa 1100 wrap ideas must account for the tailgate with the rear glass in it. The film ends at the edge of the glass, so the installer cuts around it cleanly. The door handles, locks, and trim pieces often come off for a neater edge. The coupe and sedan have simpler rear panels than the wagon.

How much vinyl to wrap a Hansa 1100 depends on the generation and body style. Both generations list the same film amounts: about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the sedan. A chrome or patterned film raises the estimate to up to about 59 ft (18 m). The first and second generations differ by only 0.4 in (10 mm) in length.

Questions about wrapping a Borgward Hansa 1100

How much vinyl does it take to wrap a Borgward Hansa 1100?

It takes about 44 ft (13.5 m) for the coupe to 51 ft (15.5 m) for the sedan to wrap a Borgward Hansa 1100. That estimate is for 60-inch (1.52 m) cast film on the newest body. A wagon may need a little more because of the tailgate. Chrome or patterned film can raise the amount to about 59 ft (18 m).

Which Hansa 1100 body takes more film?

The sedan takes more film than the coupe: 51 ft (15.5 m) against 44 ft (13.5 m). The wagon is not given a separate figure in the data, but it has the tailgate with the rear glass. The sedan has more panels than the coupe, so it needs the longer roll. The estimate uses 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Hansa 1100?

Yes, only the hood or the roof of a Hansa 1100 can be wrapped. A partial wrap on this car covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges. Paint protection film is a clear film on the front end.

Is a Hansa 1100 hard to wrap?

A Hansa 1100 is not hard to wrap, but the tailgate with the rear glass adds work. The installer must cut the film at the edge of the glass on that panel. The subcompact size means fewer large flat areas than a longer car. The coupe and sedan have straightforward panels.