Wraps by car

Borgward Hansa 1500 wrap

The Borgward Hansa 1500 wrap page covers this first-generation compact from 1949–1954 in one generation. A vinyl wrap takes about 52 ft (16 m) for the convertible to 59 ft (18 m) for the wagon with 60-inch (1.52 m) cast film. Chrome or patterned film can need up to about 67 ft (20.5 m). The car came in convertible, coupe, sedan, and wagon with 2 or 3 doors.

1generations16 mof film for a full wrap

Borgward Hansa 1500, first generation, factory photo
Borgward Hansa 1500, first generation. Factory color shown.

Borgward Hansa 1500 wrap colors and ideas

  • Hansa 1500 black wrap
  • Hansa 1500 white wrap
  • Hansa 1500 gray wrap
  • Hansa 1500 silver wrap
  • Hansa 1500 red wrap
  • Hansa 1500 blue wrap
  • Hansa 1500 green wrap
  • Hansa 1500 yellow wrap
  • Hansa 1500 orange wrap
  • Hansa 1500 purple wrap
  • Hansa 1500 pink wrap
  • Hansa 1500 teal wrap
  • Hansa 1500 brown wrap
  • Hansa 1500 gold wrap
  • Hansa 1500 chrome wrap
  • Hansa 1500 color shift wrap
  • Hansa 1500 carbon fiber wrap
  • Hansa 1500 camo and patterned wrap

How much vinyl to wrap a Borgward Hansa 1500

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1949–1954convertible, coupe, sedan, wagon (2 or 3 doors)175.2 in (4,450 mm)about 52 ft (16 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Hansa 1500 wrap cost factors

Hansa 1500 wrap cost is set by the body style, film type, and how much of the car you cover. The wagon uses about 59 ft (18 m) of film, 7 ft (2 m) more than the convertible. Chrome or patterned film adds up to about 67 ft (20.5 m) and more labor for cut-outs. A partial job like the hood costs less than a full wrap.

  • Film for a full wrap: about 52 ft (16 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: convertible, coupe, sedan, wagon (2 or 3 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Hansa 1500 wraps by generation

Swipe sideways. Tap a card for the full description.

Borgward Hansa 1500, first generation, factory photo
Factory color shown

1949–1954 Hansa 1500 convertible, coupe, sedan, wagon (first generation)

1949–1954convertible, coupe, sedan, wagon (2 or 3 doors)175.2 in (4,450 mm)

On the first-generation Borgward Hansa 1500 the open top is left unwrapped when it is fabric and the film ends where the top begins. A folding hard top is wrapped as panels of its own, with seams at the panel gaps. The convertible body also has no roof film to cover, so it uses the least vinyl of all styles.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Hansa 1500

A partial wrap on a Borgward Hansa 1500 can cover the roof, hood, or mirror caps. Hansa 1500 chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film placed on the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Borgward Hansa 1500: body, cut-outs and film

A Borgward Hansa 1500 vinyl wrap has to handle four body styles in a compact 175.2 in (4,450 mm) length. The sedan and coupe have fixed roofs, so the film runs over the roof in one piece. The wagon's tailgate with rear glass means the film ends at the edge of the glass. The convertible's fabric top is not wrapped and the film ends where the top begins.

Hansa 1500 wrap ideas include cutting out around the tailgate glass on the wagon, where the film stops at the glass edge. On a convertible the fabric top stays uncovered and the film ends at its base, while a folding hard top is wrapped as its own panels. Door handles, trim, and badges come off for a clean install. The small size keeps cut-outs fewer than on a larger car.

How much vinyl to wrap a Hansa 1500 depends on the body style you have. The convertible is the shortest job at about 52 ft (16 m) because the top is not wrapped. The wagon needs about 59 ft (18 m) with its taller rear body. If you choose chrome or patterned film, plan for up to about 67 ft (20.5 m).

Questions about wrapping a Borgward Hansa 1500

How much vinyl does it take to wrap a Borgward Hansa 1500?

A full wrap of a Borgward Hansa 1500 takes about 52 ft (16 m) for the convertible to 59 ft (18 m) for the wagon. That estimate is for 60-inch (1.52 m) cast film. Chrome or patterned film can run up to about 67 ft (20.5 m). The exact amount depends on your body style.

Is the top of a Hansa 1500 wrapped?

No, the fabric top of a Hansa 1500 is not wrapped. The film ends where the top begins. A folding hard top is wrapped as panels of its own. The open top is left as it is.

Which Hansa 1500 body takes more film?

The wagon takes more film than the convertible, about 59 ft (18 m) against 52 ft (16 m). The sedan and coupe fall between those figures. The wagon's taller rear body and tailgate add surface area. The convertible has no roof to wrap.

Can I wrap only the hood or the roof of a Hansa 1500?

Yes, you can wrap only the hood or the roof of a Hansa 1500. A partial wrap can also cover mirror caps. Chrome delete on window trim and badges is another smaller job. Paint protection film is placed only on the front end.