Wraps by car

Bugatti Bolide wrap

The Bugatti Bolide wrap page covers the first generation of the Bugatti Bolide, produced from 2020 to now. A full vinyl wrap of the coupe body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. This page explains the film amounts, wrap details, and partial options for this track-focused car.

1generations14.5 mof film for a full wrap

Bugatti Bolide, first generation, factory photo
Bugatti Bolide, first generation. Factory color shown.

Bugatti Bolide wrap colors and ideas

  • Bolide black wrap
  • Bolide white wrap
  • Bolide gray wrap
  • Bolide silver wrap
  • Bolide red wrap
  • Bolide blue wrap
  • Bolide green wrap
  • Bolide yellow wrap
  • Bolide orange wrap
  • Bolide purple wrap
  • Bolide pink wrap
  • Bolide teal wrap
  • Bolide brown wrap
  • Bolide gold wrap
  • Bolide chrome wrap
  • Bolide color shift wrap
  • Bolide carbon fiber wrap
  • Bolide camo and patterned wrap

How much vinyl to wrap a Bugatti Bolide

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowcoupe (2 doors)187.2 in (4,756 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Bolide wrap cost factors

The Bolide wrap cost depends on the size of the car and the amount of film needed for the chosen finish. A full wrap uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, but chrome or patterned film raises the figure to about 54 ft (16.5 m). The two long side doors add labor because each door must be covered with one large piece of film without seams. Partial jobs like the roof or hood use less material and therefore change the total cost.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Bolide wraps by generation

Swipe sideways. Tap a card for the full description.

Bugatti Bolide, first generation, factory photo
Factory color shown

2020–now Bolide coupe (first generation)

2020–nowcoupe (2 doors)187.2 in (4,756 mm)

The first generation Bugatti Bolide is a two-door coupe built from 2020 to now. Its length of 187.2 in (4,756 mm) makes the body panels long, especially the side doors which each take one large piece of film. A full wrap of this mid-size coupe needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. With no other generation produced, this body style defines the wrap work for every Bolide.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Bolide

For a partial wrap of the Bugatti Bolide, you can cover the roof, hood, or mirror caps with vinyl. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film option for the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be chosen individually.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bugatti Bolide: body, cut-outs and film

A Bugatti Bolide vinyl wrap must cover a mid-size coupe with two long side doors. The car is 187.2 in (4,756 mm) long, which means a full wrap uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Each door is one large piece of film, so the installer needs to handle very wide panels. The coupe body has no separate trunk or hatch panels, which reduces the number of visible seams.

Bolide wrap ideas often start with the two long doors, because each door can be covered with one large piece of film. The roof and hood are also large flat areas that suit a clean color change without extra cut lines. For a chrome delete, the window trim and badges are the parts that need black film cut precisely. With chrome or patterned film, you need about 54 ft (16.5 m) of 60-inch (1.52 m) material for a full wrap.

To find how much vinyl to wrap a Bolide, you only need the figures for the single generation made from 2020 to now. There is no earlier or later body to compare, so the film estimate stays the same for every Bolide. The 187.2 in (4,756 mm) length and two-door coupe shape set the panel count and the width of the film pieces. When you count film for a full wrap, use about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Bugatti Bolide

How much vinyl does it take to wrap a Bugatti Bolide?

A Bugatti Bolide takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl film for a full wrap. If you choose chrome or patterned film, the amount rises to about 54 ft (16.5 m) because of extra material needed for trimming. The coupe body is 187.2 in (4,756 mm) long, which sets the panel widths for the two large side doors.

Can I wrap only the hood or the roof of a Bolide?

Yes, you can wrap only the hood or the roof of a Bolide. A partial wrap on this car can also cover the mirror caps, while a chrome delete handles the window trim and badges. Paint protection film (PPF) is another partial option that covers the front end with clear film. These smaller jobs use less film than a full wrap of the coupe body.

Is a Bolide hard to wrap?

A Bolide is not hard to wrap for an installer with experience on long, low coupes. The two long side doors add work because each door must be covered with one large piece of film without a seam. The car's length of 187.2 in (4,756 mm) means the roof and hood pieces are also long and need careful positioning. The coupe body has no separate trunk or hatch, which reduces the number of tricky cut-outs.

How many generations of the Bolide does this page cover?

This page covers one generation of the Bugatti Bolide. The first generation has been produced from 2020 to now, and no other generation exists in the catalog. That means all wrap information on this page applies to every Bolide.