Wraps by car

Bugatti Type 55 wrap

The Bugatti Type 55 wrap page covers the 1932–1935 convertible, the only generation in the catalog. A full vinyl wrap of this sports car takes about 33 ft (10 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 41 ft (12.5 m).

1generations10 mof film for a full wrap

Bugatti Type 55, first generation, factory photo
Bugatti Type 55, first generation. Factory color shown.

Bugatti Type 55 wrap colors and ideas

  • Type 55 black wrap
  • Type 55 white wrap
  • Type 55 gray wrap
  • Type 55 silver wrap
  • Type 55 red wrap
  • Type 55 blue wrap
  • Type 55 green wrap
  • Type 55 yellow wrap
  • Type 55 orange wrap
  • Type 55 purple wrap
  • Type 55 pink wrap
  • Type 55 teal wrap
  • Type 55 brown wrap
  • Type 55 gold wrap
  • Type 55 chrome wrap
  • Type 55 color shift wrap
  • Type 55 carbon fiber wrap
  • Type 55 camo and patterned wrap

How much vinyl to wrap a Bugatti Type 55

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1932–1935convertible (2 doors)136.2 in (3,460 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)

Type 55 wrap cost factors

Type 55 wrap cost depends on the film type and the amount of disassembly. A chrome or patterned film needs about 41 ft (12.5 m), while a solid color uses about 33 ft (10 m) of 60-inch (1.52 m) cast film. The convertible top is not wrapped, which reduces labor on the upper body. Preparation of the 136.2 in (3,460 mm) body and any trim removal also affect the final cost.

  • Film for a full wrap: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Type 55 wraps by generation

Swipe sideways. Tap a card for the full description.

Bugatti Type 55, first generation, factory photo
Factory color shown

1932–1935 Type 55 convertible (first generation)

1932–1935convertible (2 doors)136.2 in (3,460 mm)

The open top of the first generation Bugatti Type 55 is left uncovered in a wrap. The film ends where the fabric top begins, so the edge is trimmed along that line. A folding hard top is wrapped as panels of its own. The convertible body needs no cutting for roof pillars, which simplifies the installation.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Roof, hood, chrome delete and PPF on a Type 55

A partial wrap on a Type 55 can cover the hood, mirror caps, or rear deck. Type 55 chrome delete uses black film on window trim and badges. Paint protection film (PPF) is available as clear film on the front end. These smaller jobs use less than the full 33 ft (10 m) of material.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bugatti Type 55: body, cut-outs and film

A Bugatti Type 55 vinyl wrap must follow the short 136.2 in (3,460 mm) two-door convertible body. The fabric top is not wrapped, so the film ends where the top begins. A folding hard top is wrapped as panels of its own. The compact size keeps material use under 41 ft (12.5 m) even with patterned film.

Type 55 wrap ideas start with the open top, because the film stops at its edge and never covers the fabric. The convertible body has no roof pillars to work around. Window trim and badges can be covered with black film for a chrome delete. The rear deck and hood are separate panels that suit an accent color.

How much vinyl to wrap a Type 55 changes with the film choice, not the generations. The catalog lists one body from 1932–1935, so the estimate stays about 33 ft (10 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 41 ft (12.5 m) because of extra material for matching. The short 136.2 in (3,460 mm) body keeps the total lower than on longer sports cars.

Questions about wrapping a Bugatti Type 55

How much vinyl does it take to wrap a Bugatti Type 55?

It takes about 33 ft (10 m) of 60-inch (1.52 m) cast film for a full wrap. With chrome or patterned film the estimate is about 41 ft (12.5 m). The Bugatti Type 55 convertible body is short at 136.2 in (3,460 mm), which keeps the amount manageable.

Is the top of a Type 55 wrapped?

No, the top of a Type 55 is not wrapped. A fabric top is left uncovered and the film ends where it begins. A folding hard top is wrapped as panels of its own. This is standard for convertible bodies.

Can I wrap only the hood or the roof of a Type 55?

Yes, you can wrap only the hood or the roof of a Type 55. A partial wrap can cover the hood, mirror caps, or rear deck. The roof is not wrapped because it is fabric on this convertible. Chrome delete on window trim and badges is another small job.

Is a Type 55 hard to wrap?

A Type 55 adds work because of its convertible top and classic body. The fabric top is not wrapped, so the film edge must be cut precisely where the top begins. The short 136.2 in (3,460 mm) body has curved panels that need careful stretching. A folding hard top must be wrapped as panels of its own if present.