Wraps by car

Bugatti Chiron wrap

This page covers the Bugatti Chiron wrap options, film requirements, and body details for this sports car. The Chiron appears in one generation in the catalog, with production from 2016 onward. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Bugatti Chiron, first generation, factory photo
Bugatti Chiron, first generation. Factory color shown.

Bugatti Chiron wrap colors and ideas

  • Chiron black wrap
  • Chiron white wrap
  • Chiron gray wrap
  • Chiron silver wrap
  • Chiron red wrap
  • Chiron blue wrap
  • Chiron green wrap
  • Chiron yellow wrap
  • Chiron orange wrap
  • Chiron purple wrap
  • Chiron pink wrap
  • Chiron teal wrap
  • Chiron brown wrap
  • Chiron gold wrap
  • Chiron chrome wrap
  • Chiron color shift wrap
  • Chiron carbon fiber wrap
  • Chiron camo and patterned wrap

How much vinyl to wrap a Bugatti Chiron

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowcoupe (2 doors)178.9 in (4,544 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Chiron wrap cost factors

Chiron wrap cost depends on the size of the car, the film type, and the labor for cut-outs. A full wrap needs about 51 ft (15.5 m) of cast film, or about 57 ft (17.5 m) for chrome or patterned film. Parking sensors in the bumpers add time because each sensor is cut around. The two long doors are wrapped as single pieces, which requires careful handling.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Chiron wraps by generation

Swipe sideways. Tap a card for the full description.

Bugatti Chiron, first generation, factory photo
Factory color shown

2016–now Chiron coupe (first generation)

2016–nowcoupe (2 doors)178.9 in (4,544 mm)

The first generation Bugatti Chiron, built from 2016 to now, is a coupe with two doors and a length of 178.9 in (4,544 mm). A full wrap of this body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The long doors are each covered with one large piece, which reduces seams but demands precise installation.

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Chiron

For the Bugatti Chiron, partial wrap jobs include the roof, hood, and mirror caps, while chrome delete covers window trim and badges with black film. Paint protection film (PPF) is also used as a clear film on the front end. These smaller jobs let you wrap specific areas without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bugatti Chiron: body, cut-outs and film

A Bugatti Chiron vinyl wrap requires careful planning because the car has two long side doors and a coupe body with a length of 178.9 in (4,544 mm). Each side door is one large piece of film, so installers need enough material to cover tall panels without seams. The wrap must follow the car's curved surfaces, so cast film is used for conformability.

For Chiron wrap ideas, installers must plan cut-outs for parking sensors in the bumpers on every trim. The sensors are cut around individually so the film lies flat and the system still works. The long doors are wrapped as single pieces, which reduces visible seams.

When you look at how much vinyl to wrap a Chiron, the single generation means one set of measurements applies to all cars from 2016 to now. The coupe body is 178.9 in (4,544 mm) long, and a full wrap uses about 51 ft (15.5 m) of film. If you choose chrome or patterned film, plan for about 57 ft (17.5 m).

Questions about wrapping a Bugatti Chiron

How much vinyl does it take to wrap a Bugatti Chiron?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Bugatti Chiron. For chrome or patterned film, you need about 57 ft (17.5 m). These figures are for the newest body, which is the only generation in the catalog.

Can I wrap only the hood or the roof of a Chiron?

Yes, you can wrap only the hood or the roof of a Chiron as a partial wrap. Other partial options include mirror caps, and chrome delete for window trim and badges. Paint protection film is also used on the front end.

Is a Chiron hard to wrap?

A Chiron is hard to wrap because of its 178.9 in (4,544 mm) length and two long doors that each need one large piece of film. Parking sensors in the bumpers on every trim must be cut around individually. The car's curved surfaces require cast film for proper conformability.

How many generations of the Chiron does this page cover?

This page covers one generation of the Chiron, produced from 2016 to now. All wrap measurements and body details refer to that generation.