Wraps by car

Bugatti EB 110 wrap

The Bugatti EB 110 wrap page covers the first generation sports car produced from 1991 to 1995 and the vinyl wrap film a full body takes. A complete wrap of the coupe body uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 54 ft (16.5 m). The page holds wrap facts and answers for owners of this car.

1generations13.5 mof film for a full wrap

Bugatti EB 110, first generation, factory photo
Bugatti EB 110, first generation. Factory color shown.

Bugatti EB 110 wrap colors and ideas

  • Bugatti EB 110 black wrap
  • Bugatti EB 110 white wrap
  • Bugatti EB 110 gray wrap
  • Bugatti EB 110 silver wrap
  • Bugatti EB 110 red wrap
  • Bugatti EB 110 blue wrap
  • Bugatti EB 110 green wrap
  • Bugatti EB 110 yellow wrap
  • Bugatti EB 110 orange wrap
  • Bugatti EB 110 purple wrap
  • Bugatti EB 110 pink wrap
  • Bugatti EB 110 teal wrap
  • Bugatti EB 110 brown wrap
  • Bugatti EB 110 gold wrap
  • Bugatti EB 110 chrome wrap
  • Bugatti EB 110 color shift wrap
  • Bugatti EB 110 carbon fiber wrap
  • Bugatti EB 110 camo and patterned wrap

How much vinyl to wrap a Bugatti EB 110

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1995coupe (2 doors)173.4 in (4,404 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Bugatti EB 110 wrap cost factors

The Bugatti EB 110 wrap cost depends on the film type and the amount of material needed for the 173.4 in (4,404 mm) coupe. A full wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, or about 54 ft (16.5 m) for chrome or patterned film. Labor time on the two long doors and the car's contours also affects the final cost.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Bugatti EB 110 wraps by generation

Swipe sideways. Tap a card for the full description.

Bugatti EB 110, first generation, factory photo
Factory color shown

1991–1995 Bugatti EB 110 coupe (first generation)

1991–1995coupe (2 doors)173.4 in (4,404 mm)

The first generation Bugatti EB 110 from 1991 to 1995 requires a paint inspection before wrapping because panels may be original or repainted. A test spot on a small area shows whether the film will adhere without lifting old paint. This step is part of the wrap process for a car of these years.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Bugatti EB 110

A partial wrap on a Bugatti EB 110 can cover the roof, hood, or mirror caps only. A Bugatti EB 110 chrome delete covers window trim and badges with black film, changing the bright trim to a darker look. Paint protection film (PPF) on the front end adds clear film to guard against stone chips. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bugatti EB 110: body, cut-outs and film

A Bugatti EB 110 vinyl wrap covers one body style: a two-door coupe with a length of 173.4 in (4,404 mm). The two long side doors are each one large piece of film, which makes panel work straightforward. The compact sports car shape means there are no long roof or bed sections to manage. Installers can wrap each panel cleanly without excessive seams.

Bugatti EB 110 wrap ideas start with the two long side doors, where each door is covered by one large piece of film. The doors need careful squeegee work because of their size and curvature. There are no other listed cut-outs or removable parts on this body. Any extra detailing depends on the chosen film and owner preferences.

To know how much vinyl to wrap a Bugatti EB 110, measure the two-door coupe that is 173.4 in (4,404 mm) long. A full wrap on this generation needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds waste, so plan around 54 ft (16.5 m). The fixed body style keeps the estimate consistent for all production years.

Questions about wrapping a Bugatti EB 110

How much vinyl does it take to wrap a Bugatti EB 110?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to fully wrap a Bugatti EB 110. For chrome or patterned film, the estimate rises to about 54 ft (16.5 m) because of extra material needed for pattern matching and waste.

Can I wrap only the hood or the roof of a Bugatti EB 110?

Yes, you can wrap only the hood or the roof of a Bugatti EB 110 as a partial wrap. Other partial options include mirror caps, a chrome delete on window trim and badges, or paint protection film on the front end.

Is a Bugatti EB 110 hard to wrap?

A Bugatti EB 110 is not hard to wrap, but it adds work because of the two long side doors, each one large piece of film. The car's length of 173.4 in (4,404 mm) means large panels demand careful handling and squeegee technique.

How many generations of the Bugatti EB 110 does this page cover?

This page covers one generation of the Bugatti EB 110, the first generation produced from 1991 to 1995.