Wraps by car

Bugatti Tourbillon wrap

This page covers the Bugatti Tourbillon wrap, a vinyl wrap job for the hybrid sports car built from 2026. The catalog includes one generation of the car, the first and only body so far. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Bugatti Tourbillon, first generation, factory photo
Bugatti Tourbillon, first generation. Factory color shown.

Bugatti Tourbillon wrap colors and ideas

  • Tourbillon black wrap
  • Tourbillon white wrap
  • Tourbillon gray wrap
  • Tourbillon silver wrap
  • Tourbillon red wrap
  • Tourbillon blue wrap
  • Tourbillon green wrap
  • Tourbillon yellow wrap
  • Tourbillon orange wrap
  • Tourbillon purple wrap
  • Tourbillon pink wrap
  • Tourbillon teal wrap
  • Tourbillon brown wrap
  • Tourbillon gold wrap
  • Tourbillon chrome wrap
  • Tourbillon color shift wrap
  • Tourbillon carbon fiber wrap
  • Tourbillon camo and patterned wrap

How much vinyl to wrap a Bugatti Tourbillon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2026–nowcoupe (2 doors)183.9 in (4,671 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Tourbillon wrap cost factors

The Tourbillon wrap cost depends on the amount of film, which is about 52 ft (16 m) of 60-inch (1.52 m) material for a full wrap. Labor is greater because the two long side doors are each wrapped as one large piece. The cost also changes with the finish chosen, such as chrome or patterned film, which needs about 59 ft (18 m).

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Tourbillon wraps by generation

Swipe sideways. Tap a card for the full description.

Bugatti Tourbillon, first generation, factory photo
Factory color shown

2026–now Tourbillon coupe (first generation)

2026–nowcoupe (2 doors)183.9 in (4,671 mm)

The first generation Bugatti Tourbillon is a coupe with two doors and a length of 183.9 in (4,671 mm). Its two long side doors are each one large piece of film, which affects how the wrap is planned. The body has no other styles, so the number of panels is fixed for this generation.

Two long side doors: each door is one large piece of film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Tourbillon

A partial wrap on a Bugatti Tourbillon can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bugatti Tourbillon: body, cut-outs and film

The Bugatti Tourbillon vinyl wrap starts with a coupe body that is 183.9 in (4,671 mm) long. The two long side doors are each wrapped as one large piece of film, which demands careful handling. The car has only one body style, so the panel count is the same for every Tourbillon.

Tourbillon wrap ideas include covering the two long side doors, which are the largest panels on the car. On plug-in and electric versions, the charge port door is wrapped as a small piece of its own. The installer cuts around lights, grilles, and vents, and removes badges and trim where needed.

If you are working out how much vinyl to wrap a Tourbillon, the single generation keeps the estimate simple. The car is 183.9 in (4,671 mm) long, and the coupe shape has no variations in body panels. A full wrap uses about 52 ft (16 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Bugatti Tourbillon

How much vinyl does it take to wrap a Bugatti Tourbillon?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Bugatti Tourbillon. For chrome or patterned film, the estimate is about 59 ft (18 m). The car is a coupe with two long side doors, each wrapped as one piece.

Can I wrap only the hood or the roof of a Tourbillon?

Yes, you can wrap only the hood or the roof of a Tourbillon. A partial wrap can also cover the mirror caps, or a chrome delete can cover window trim and badges. Paint protection film (PPF) is another option for clear film on the front end.

Is a Tourbillon hard to wrap?

Yes, a Tourbillon is hard to wrap because the two long side doors are each one large piece of film. The car is 183.9 in (4,671 mm) long, so the panels need careful alignment. On plug-in and electric versions, the charge port door adds a small separate piece.

How many generations of the Tourbillon does this page cover?

This page covers one generation of the Tourbillon. The first generation has been built from 2026 and continues now.