Wraps by car

Cadillac Allante wrap

The Cadillac Allante is a single-generation full-size convertible built from 1987 to 1996. A full wrap of its body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl wrap film. The page covers vinyl wrap needs, preparation and options for the Cadillac Allante wrap.

1generations14.5 mof film for a full wrap

Cadillac Allante, first generation, factory photo
Cadillac Allante, first generation. Factory color shown.

Cadillac Allante wrap colors and ideas

  • Allante black wrap
  • Allante white wrap
  • Allante gray wrap
  • Allante silver wrap
  • Allante red wrap
  • Allante blue wrap
  • Allante green wrap
  • Allante yellow wrap
  • Allante orange wrap
  • Allante purple wrap
  • Allante pink wrap
  • Allante teal wrap
  • Allante brown wrap
  • Allante gold wrap
  • Allante chrome wrap
  • Allante color shift wrap
  • Allante carbon fiber wrap
  • Allante camo and patterned wrap

How much vinyl to wrap a Cadillac Allante

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1996convertible (2 doors)178.7 in (4,540 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Allante wrap cost factors

Allante wrap cost depends on the area covered, with a full wrap needing about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Paint condition and bodywork add preparation time before any vinyl is applied. The convertible top reduces the wrapped surface compared with a closed car, which lowers material use.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Allante wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac Allante, first generation, factory photo
Factory color shown

1987–1996 Allante convertible (first generation)

1987–1996convertible (2 doors)178.7 in (4,540 mm)

The Cadillac Allante first generation has a fabric convertible top that is not wrapped. The vinyl film ends at the edge where the painted body meets the soft top, leaving the roof fabric uncovered. The rear deck and hood are wrapped as usual, and the film follows the beltline around the two-door body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an Allante

Allante chrome delete and partial wrap jobs cover smaller areas than a colour change wrap. A partial wrap can be done on the hood, mirror caps or rear deck, and chrome delete covers window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is another option for this convertible.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cadillac Allante: body, cut-outs and film

The Cadillac Allante vinyl wrap covers a convertible body that is 178.7 in (4,540 mm) long. The fabric folding top is not wrapped, so film is ordered for the painted surfaces only. The two-door convertible shape means a full wrap is feasible with one continuous roll of cast film.

Allante wrap ideas start with the convertible body, where the film ends cleanly at the edge of the soft top. A folding hard top would be wrapped as its own panels, but the Allante uses a fabric top. Door handles, mirrors and trim are removed for a neat install around the two doors.

How much vinyl to wrap an Allante depends on the single generation sold from 1987 to 1996. The body stayed the same length through production, so one estimate covers all years. A full Cadillac Allante wrap uses about 48 ft (14.5 m) of 60-inch (1.52 m) film.

Questions about wrapping a Cadillac Allante

How much vinyl does it take to wrap a Cadillac Allante?

A Cadillac Allante takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap. The fabric convertible top is not included, so this figure covers the painted body panels only. The estimate allows for the two doors and the long rear deck of the 178.7 in (4,540 mm) car.

Is the top of an Allante wrapped?

No, the fabric top of an Allante is not wrapped. Vinyl film adheres to painted metal and plastic, not to flexible fabric. The wrap ends at the edge where the top meets the body, so the roof stays uncovered.

Can I wrap only the hood or the roof of an Allante?

Yes, you can wrap only the hood, mirror caps or rear deck of an Allante as a partial wrap. A chrome delete is also possible on the window trim and badges. These smaller jobs use less film than a full colour change wrap.

Is an Allante hard to wrap?

An Allante adds some work because of its fabric convertible top, which must be masked off carefully so the film ends cleanly. The full-size body takes about 48 ft (14.5 m) of 60-inch (1.52 m) film. Door handles, mirrors and trim are removed for access around the two-door shape.