Wraps by car

Cadillac ATS wrap

This page covers the Cadillac ATS wrap for the single generation built from 2012 to 2019. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) on the coupe to 52 ft (16 m) on the sedan when using 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Cadillac ATS, first generation, factory photo
Cadillac ATS, first generation. Factory color shown.

Cadillac ATS wrap colors and ideas

  • Cadillac ATS black wrap
  • Cadillac ATS white wrap
  • Cadillac ATS gray wrap
  • Cadillac ATS silver wrap
  • Cadillac ATS red wrap
  • Cadillac ATS blue wrap
  • Cadillac ATS green wrap
  • Cadillac ATS yellow wrap
  • Cadillac ATS orange wrap
  • Cadillac ATS purple wrap
  • Cadillac ATS pink wrap
  • Cadillac ATS teal wrap
  • Cadillac ATS brown wrap
  • Cadillac ATS gold wrap
  • Cadillac ATS chrome wrap
  • Cadillac ATS color shift wrap
  • Cadillac ATS carbon fiber wrap
  • Cadillac ATS camo and patterned wrap

How much vinyl to wrap a Cadillac ATS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2019coupe, sedan (2 or 4 doors)182.8 in (4,643 mm) to 183.6 in (4,663 mm)about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Cadillac ATS wrap cost factors

The Cadillac ATS wrap cost depends on the film type, the body style and the labor for the details of this car. A full wrap takes about 51 ft (15.5 m) on the coupe or 52 ft (16 m) on the sedan with 60-inch (1.52 m) cast film. Chrome or patterned film can raise the amount to about 64 ft (19.5 m). Every trim needs cut-outs for parking sensors, and some trims add cut-outs for a sunroof or cameras.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: coupe, sedan (2 or 4 doors).
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Restyled in 2014: bumpers and lights differ between the versions, and so do the film cuts.

Cadillac ATS wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac ATS, first generation, factory photo
Factory color shown

2012–2019 Cadillac ATS coupe, sedan (first generation)

2012–2019coupe, sedan (2 or 4 doors)182.8 in (4,643 mm) to 183.6 in (4,663 mm)

The first generation Cadillac ATS ran from 2012 to 2019 and received a restyling in 2014. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. For a wrap installer this means checking the production year before cutting the front and rear bumper pieces. The body length stayed between 182.8 in (4,643 mm) and 183.6 in (4,663 mm), so roof and door panels are not affected.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Film: about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Cadillac ATS

A partial wrap on a Cadillac ATS can cover the roof, hood or mirror caps only. A Cadillac ATS chrome delete replaces bright window trim and badges with black film. Paint protection film (PPF) as a clear film can be applied to the front end to guard against stone chips. Each job requires less film than a full wrap, and the installer still cuts around sensors and cameras.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Cadillac ATS: body, cut-outs and film

A Cadillac ATS vinyl wrap follows the mid-size coupe and sedan body styles with lengths from 182.8 in (4,643 mm) to 183.6 in (4,663 mm). The close size range means the film estimate stays between 51 ft (15.5 m) and 52 ft (16 m) for a full color change wrap. Installers plan the wrap in large panels across the doors, quarters and roof. The sedan adds two more door openings than the coupe, but the extra film needed is minimal.

Cadillac ATS wrap ideas must account for the factory features on each trim. Every trim has parking sensors in the bumpers, so the installer cuts the film around each sensor. Some trims have a sunroof, which requires cutting the roof film around its opening. Some trims also have cameras in the body, and the film is cut around each lens.

How much vinyl to wrap a Cadillac ATS changes only with the body style, since the catalog shows one generation. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the sedan needs about 52 ft (16 m). The length stayed between 182.8 in (4,643 mm) and 183.6 in (4,663 mm) for the whole production run. The 2014 restyling altered the bumpers and lights but did not change the overall film amount.

Questions about wrapping a Cadillac ATS

How much vinyl does it take to wrap a Cadillac ATS?

A full wrap of a Cadillac ATS takes about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 64 ft (19.5 m). The exact amount depends on the body style and the installer's cutting plan.

Can the roof of a Cadillac ATS be wrapped?

Yes, the roof of a Cadillac ATS can be wrapped as a standalone job. The installer uses a single piece of vinyl cut to the roof panel. On trims with a sunroof, the film is cut around its opening.

Which years of the Cadillac ATS take the same film cuts?

The 2012–2013 Cadillac ATS models share one set of film cuts, and the 2014–2019 models share another. This is because the 2014 restyling changed the bumpers and lights. The roof and door panels are unaffected by the restyling.

Which Cadillac ATS body takes more film?

The sedan takes more film than the coupe: about 52 ft (16 m) versus 51 ft (15.5 m) with 60-inch (1.52 m) cast film. The sedan has two extra door openings, which accounts for the small difference.