Wraps by car

Cadillac BLS wrap

The Cadillac BLS wrap page covers the single generation built from 2006 to 2009. This mid-size Cadillac came as a sedan and a wagon. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) film for the sedan. The wagon needs about 64 ft (19.5 m) of the same cast film.

1generations19.5 mof film for a full wrap

Cadillac BLS, first generation, factory photo
Cadillac BLS, first generation. Factory color shown.

Cadillac BLS wrap colors and ideas

  • Cadillac BLS black wrap
  • Cadillac BLS white wrap
  • Cadillac BLS gray wrap
  • Cadillac BLS silver wrap
  • Cadillac BLS red wrap
  • Cadillac BLS blue wrap
  • Cadillac BLS green wrap
  • Cadillac BLS yellow wrap
  • Cadillac BLS orange wrap
  • Cadillac BLS purple wrap
  • Cadillac BLS pink wrap
  • Cadillac BLS teal wrap
  • Cadillac BLS brown wrap
  • Cadillac BLS gold wrap
  • Cadillac BLS chrome wrap
  • Cadillac BLS color shift wrap
  • Cadillac BLS carbon fiber wrap
  • Cadillac BLS camo and patterned wrap

How much vinyl to wrap a Cadillac BLS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2009sedan, wagon (4 or 5 doors)184.3 in (4,680 mm) to 185.7 in (4,716 mm)about 57 ft (17.5 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Cadillac BLS wrap cost factors

Cadillac BLS wrap cost depends mainly on film choice and panel count. The sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while the wagon needs about 64 ft (19.5 m). Chrome or patterned film on a wagon can push the total to around 72 ft (22 m). Installer time rises with cut-outs for fog lamps on some trims.

  • Film for a full wrap: about 57 ft (17.5 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Cadillac BLS wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac BLS, first generation, factory photo
Factory color shown

2006–2009 Cadillac BLS sedan, wagon (first generation)

2006–2009sedan, wagon (4 or 5 doors)184.3 in (4,680 mm) to 185.7 in (4,716 mm)

The first generation Cadillac BLS offered a sedan and a wagon. The sedan body is 184.3 in (4,680 mm) long and uses about 57 ft (17.5 m) of 60-inch (1.52 m) film. The wagon is 185.7 in (4,716 mm) long and takes about 64 ft (19.5 m). The wagon also has a tailgate with the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Cadillac BLS

A partial wrap on a Cadillac BLS can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear urethane film applied to the front end. These smaller jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Cadillac BLS: body, cut-outs and film

A Cadillac BLS vinyl wrap must follow two distinct body styles. The sedan is 184.3 in (4,680 mm) long, while the wagon reaches 185.7 in (4,716 mm). The wagon has a taller rear end with a tailgate and larger rear side glass. These differences add roof and rear panel area, so the wagon calls for about 7 ft more film than the sedan.

Cadillac BLS wrap ideas start with accounting for the tailgate on the wagon. The rear glass sits in the tailgate, so installers end the film at the edge of the glass. Some trims have fog lamps in the front bumper, which require cut-outs in the bumper film. Removing door handles, mirrors, and badges gives a cleaner finish.

Knowing how much vinyl to wrap a Cadillac BLS means comparing the two body styles. For the first generation sedan, the estimate is about 57 ft (17.5 m) of 60-inch (1.52 m) film. The wagon uses about 64 ft (19.5 m) of the same material. The extra film covers the wagon roof and the larger rear quarters.

Questions about wrapping a Cadillac BLS

How much vinyl does it take to wrap a Cadillac BLS?

A full wrap of a Cadillac BLS takes about 57 ft (17.5 m) of 60-inch (1.52 m) film for the sedan. The wagon needs about 64 ft (19.5 m) of the same cast film. These figures cover the outside painted surfaces with a small margin for waste.

Which Cadillac BLS body takes more film?

The Cadillac BLS wagon takes more film than the sedan. The wagon needs about 64 ft (19.5 m) of 60-inch (1.52 m) film. The sedan takes about 57 ft (17.5 m). The wagon's tailgate, roof, and larger rear side panels add the extra material.

Can I wrap only the hood or the roof of a Cadillac BLS?

Yes, you can wrap only the hood or the roof of a Cadillac BLS. A partial wrap can also cover the mirror caps or a chrome delete on the window trim and badges. Paint protection film (PPF) on the front end is another smaller option. These jobs use less film than a full wrap, so they need less material.

Is a Cadillac BLS hard to wrap?

A Cadillac BLS is not the hardest car to wrap, but it has specific points that add work. The sedan and wagon are around 185 in (4,700 mm) long, which is a typical mid-size footprint. On the wagon, the tailgate has the rear glass in it, so the film ends at the edge of the glass. Some trims have fog lamps in the front bumper, requiring cut-outs in the bumper film.