Wraps by car

Cadillac XTS wrap

The Cadillac XTS wrap page covers the 2012–2019 sedan in its single generation. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 72 ft (22 m).

1generations19 mof film for a full wrap

Cadillac XTS, first generation, factory photo
Cadillac XTS, first generation. Factory color shown.

Cadillac XTS wrap colors and ideas

  • Cadillac XTS black wrap
  • Cadillac XTS white wrap
  • Cadillac XTS gray wrap
  • Cadillac XTS silver wrap
  • Cadillac XTS red wrap
  • Cadillac XTS blue wrap
  • Cadillac XTS green wrap
  • Cadillac XTS yellow wrap
  • Cadillac XTS orange wrap
  • Cadillac XTS purple wrap
  • Cadillac XTS pink wrap
  • Cadillac XTS teal wrap
  • Cadillac XTS brown wrap
  • Cadillac XTS gold wrap
  • Cadillac XTS chrome wrap
  • Cadillac XTS color shift wrap
  • Cadillac XTS carbon fiber wrap
  • Cadillac XTS camo and patterned wrap

How much vinyl to wrap a Cadillac XTS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2019sedan (4 doors)200.9 in (5,103 mm) to 202.0 in (5,131 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Cadillac XTS wrap cost factors

Cadillac XTS wrap cost depends on film amount, body version and labor. A full wrap uses about 62 ft (19 m) of cast film at a minimum. Chrome or patterned film takes about 72 ft (22 m) and more time to line up. The 2017 restyling means a shop must use the right pattern for the bumpers.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: sedan (4 doors).
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Cadillac XTS wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac XTS, first generation, factory photo
Factory color shown

2012–2019 Cadillac XTS sedan (first generation)

2012–2019sedan (4 doors)200.9 in (5,103 mm) to 202.0 in (5,131 mm)

The first generation Cadillac XTS ran from 2012 to 2019 and was restyled in 2017. The bumpers and lights changed, so film cut for one version does not fit the other. A wrapper must know the car's production date before cutting.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Cadillac XTS

A partial wrap on a Cadillac XTS can cover the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Cadillac XTS: body, cut-outs and film

The Cadillac XTS vinyl wrap is shaped by its large four-door sedan body. The car is 200.9 in (5,103 mm) to 202.0 in (5,131 mm) long, so the hood, roof and rear quarters use long panels. A sedan wraps with fewer complex curves than a crossover, but the rear bumper and decklid still need careful stretching. The extra length adds material to the estimate compared with a mid-size sedan.

Cadillac XTS wrap ideas often start with a chrome delete on the window trim and badges. The door handles, side markers, antenna and parking sensors need cut-outs. The bumpers come off for a clean edge, and the mirrors are wrapped in pieces.

How much vinyl to wrap a Cadillac XTS depends on the production years. The 2016 and earlier cars and the 2017–2019 cars have different bumpers and lights. Film cut for one version does not fit the other, so you count the film for the exact version.

Questions about wrapping a Cadillac XTS

How much vinyl does it take to wrap a Cadillac XTS?

About 62 ft (19 m) of 60-inch (1.52 m) cast film wraps a Cadillac XTS. That figure is for the newest body and a standard color change wrap. Add about 10 ft (3 m) for chrome or patterned film.

Which years of the Cadillac XTS take the same film cuts?

The 2012–2016 Cadillac XTS uses one set of cuts, and the 2017–2019 uses another. The restyling in 2017 changed the bumpers and lights, so film is not interchangeable between those groups.

Can I wrap only the hood or the roof of a Cadillac XTS?

Yes, you can wrap only the hood or the roof of a Cadillac XTS. A partial wrap is a smaller job and uses a fraction of the full wrap film. Mirror caps are another small piece you can wrap alone.

Is a Cadillac XTS hard to wrap?

A Cadillac XTS is not the hardest car to wrap, but the size adds work. The long roof and hood panels need care to avoid wrinkles. The bumpers and mirrors come off for a clean install, and the sensors need cut-outs.