Cadillac XT5 wrap cost depends on the amount of film the body needs, the work around the glass and the sensors, and the finish the owner picks. A full wrap of the newest body uses about 66 ft (20 m) of cast film, and the first generation uses about 56 ft (17 m). Chrome or patterned film adds about 8 to 12 ft (2.5 to 3.5 m) to the need on either generation. The cost also changes with the level of disassembly, such as removing the roof rails on the first generation, and with the number of cut-outs for cameras and parking sensors.

2024–now Cadillac XT5 SUV (second generation)
The second-generation Cadillac XT5 is a five-door SUV with a body length of 192.4 in (4,888 mm), which sets the film need for a full wrap at about 66 ft (20 m) of 60-inch (1.52 m) cast film. The SUV shape means large flat sides and a long roof, but the number of panels is still moderate because the car has four side doors and one tailgate. The tailgate has the rear glass in it, so the film ends at the edge of the glass and the installer does not wrap the glass itself. A chrome or patterned film on this generation takes about 74 ft (22.5 m), because the installer has to match the pattern across the longer body.
A tailgate with the rear glass in it: the film ends at the edge of the glass.
Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
