Wraps by car

Cadillac ATS-V wrap

A Cadillac ATS-V wrap transforms the look of the mid-size performance coupe or sedan with a full vinyl wrap. The first-generation ATS-V, produced from 2015 to 2019, is the only generation of this model. A full wrap of the newest ATS-V body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the coupe and 52 ft (16 m) for the sedan. Chrome or patterned film can require up to about 64 ft (19.5 m).

1generations15.5 mof film for a full wrap

Cadillac ATS-V, first generation, factory photo
Cadillac ATS-V, first generation. Factory color shown.

Cadillac ATS-V wrap colors and ideas

  • ATS-V black wrap
  • ATS-V white wrap
  • ATS-V gray wrap
  • ATS-V silver wrap
  • ATS-V red wrap
  • ATS-V blue wrap
  • ATS-V green wrap
  • ATS-V yellow wrap
  • ATS-V orange wrap
  • ATS-V purple wrap
  • ATS-V pink wrap
  • ATS-V teal wrap
  • ATS-V brown wrap
  • ATS-V gold wrap
  • ATS-V chrome wrap
  • ATS-V color shift wrap
  • ATS-V carbon fiber wrap
  • ATS-V camo and patterned wrap

How much vinyl to wrap a Cadillac ATS-V

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2019coupe, sedan (2 or 4 doors)184.0 in (4,673 mm) to 184.7 in (4,691 mm)about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

ATS-V wrap cost factors

ATS-V wrap cost depends on the film type, the body style, and how many panels are removed for installation. A full coupe wrap uses about 51 ft (15.5 m) of cast film, while a sedan wrap uses about 52 ft (16 m). Chrome or patterned film adds material because it needs up to about 64 ft (19.5 m). The labor changes with the number of cut-outs and the time spent removing bumpers, lights, and badges.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: coupe, sedan (2 or 4 doors).

ATS-V wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac ATS-V, first generation, factory photo
Factory color shown

2015–2019 ATS-V coupe, sedan (first generation)

2015–2019coupe, sedan (2 or 4 doors)184.0 in (4,673 mm) to 184.7 in (4,691 mm)

The first-generation Cadillac ATS-V, made from 2015 to 2019, comes as a coupe or a sedan. The body style decides the panel plan and the total film amount for the wrap. The coupe is 184.0 in (4,673 mm) long and the sedan is 184.7 in (4,691 mm) long. A full wrap needs about 51 ft (15.5 m) for the coupe and 52 ft (16 m) for the sedan.

Film: about 51 ft (15.5 m) for the coupe to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an ATS-V

A partial wrap on an ATS-V can cover the roof, hood, or mirror caps with vinyl. ATS-V chrome delete replaces the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect the paint from rock chips. These smaller jobs use less film than a full wrap and can be done on any body style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Cadillac ATS-V: body, cut-outs and film

A Cadillac ATS-V vinyl wrap must cover either a coupe or a sedan body style, each with its own panel layout. The coupe measures 184.0 in (4,673 mm) long, while the sedan is 184.7 in (4,691 mm) long. Both body styles share the same mid-size platform but have different door counts and roof lines. The small length difference means the film estimate is 51 ft (15.5 m) for the coupe and 52 ft (16 m) for the sedan.

ATS-V wrap ideas often start with the front bumper and hood, which need careful cut-outs around the grille, sensors, and vents. The door handles, mirrors, and badges are removed for a clean edge, while the taillights and headlights are cut out on the film. The rear bumper and trunk lid also require relief cuts around the license plate area and spoiler. A chrome delete covers the window trim and badges with black film for a sharper look.

To figure out how much vinyl to wrap an ATS-V, you compare the coupe and sedan film amounts. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, and the sedan needs about 52 ft (16 m) of the same film. If you choose chrome or patterned film, add up to about 64 ft (19.5 m) for either body style. Since the ATS-V has only one generation, those numbers stay the same for all 2015–2019 cars.

Questions about wrapping a Cadillac ATS-V

How much vinyl does it take to wrap a Cadillac ATS-V?

A Cadillac ATS-V needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the coupe and 52 ft (16 m) for the sedan. Chrome or patterned film can take up to about 64 ft (19.5 m). These figures are for a full wrap of the 2015–2019 first-generation body, which comes in two body styles.

Which ATS-V body takes more film?

The sedan takes more film than the coupe. The sedan needs about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the coupe needs about 51 ft (15.5 m). The sedan is slightly longer at 184.7 in (4,691 mm) versus 184.0 in (4,673 mm), and its extra doors add to the material used.

Can I wrap only the hood or the roof of an ATS-V?

Yes, you can wrap only the hood or the roof of an ATS-V. A partial wrap can cover the roof, hood, or mirror caps with vinyl. This uses less film than a full wrap and is a good way to change the look without covering the whole car.

Is an ATS-V hard to wrap?

An ATS-V is moderately hard to wrap because of its size and the number of trim pieces. The 184.0 in (4,673 mm) to 184.7 in (4,691 mm) length is typical for a mid-size car, but the front bumper has many cut-outs for the grille and vents. The door handles, mirrors, and badges should be removed, and the taillights and headlights need careful trimming. The coupe and sedan both require time on the doors and quarter panels.