Wraps by car

Cadillac Brougham wrap

This page covers Cadillac Brougham wrap options for the 1987–1992 sedan. The catalog includes one generation of this luxury car. A full vinyl wrap of the Brougham takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

1generations20.5 mof film for a full wrap

Cadillac Brougham, first generation, factory photo
Cadillac Brougham, first generation. Factory color shown.

Cadillac Brougham wrap colors and ideas

  • Brougham black wrap
  • Brougham white wrap
  • Brougham gray wrap
  • Brougham silver wrap
  • Brougham red wrap
  • Brougham blue wrap
  • Brougham green wrap
  • Brougham yellow wrap
  • Brougham orange wrap
  • Brougham purple wrap
  • Brougham pink wrap
  • Brougham teal wrap
  • Brougham brown wrap
  • Brougham gold wrap
  • Brougham chrome wrap
  • Brougham color shift wrap
  • Brougham carbon fiber wrap
  • Brougham camo and patterned wrap

How much vinyl to wrap a Cadillac Brougham

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1992sedan (4 doors)221.1 in (5,615 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Brougham wrap cost factors

Brougham wrap cost depends on the size of the car, the film type, and the amount of trim work. The 221.1 in (5,615 mm) body uses about 67 ft (20.5 m) of cast film in a solid color. Chrome or patterned film raises material use to about 79 ft (24 m) and adds labor for aligning the pattern.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: sedan (4 doors).

Brougham wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac Brougham, first generation, factory photo
Factory color shown

1987–1992 Brougham sedan (first generation)

1987–1992sedan (4 doors)221.1 in (5,615 mm)

The first generation Cadillac Brougham from 1987–1992 may have original or repainted panels. A test spot on the paint is done before a full wrap to check how the film adheres. Any failing clear coat or loose paint must be corrected first, or the film will not bond properly.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Brougham

Smaller jobs on a Brougham include a partial wrap of the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cadillac Brougham: body, cut-outs and film

The Cadillac Brougham vinyl wrap is planned around a single four-door sedan body. The car is 221.1 in (5,615 mm) long, so a wrap uses more film than most modern sedans. Its flat, long panels are straightforward to cover, but the overall size adds labor and material.

Brougham wrap ideas must account for the bright trim around the windows, door handles, and badges. These parts are removed or masked for a clean installation. The vinyl roof covering, if present, is not wrapped and stays as it is. Body-colored mirrors and bumpers can be wrapped in the same step.

To find how much vinyl to wrap a Brougham, start with the only generation offered from 1987 to 1992. The sedan body did not change size in those years. A full wrap of the Cadillac Brougham takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Patterned or chrome film needs about 79 ft (24 m) because of matching waste.

Questions about wrapping a Cadillac Brougham

How much vinyl does it take to wrap a Cadillac Brougham?

A full wrap of a Cadillac Brougham takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. This estimate covers the 1987–1992 sedan body. If you choose chrome or patterned film, plan for about 79 ft (24 m).

Can I wrap only the hood or the roof of a Brougham?

Yes, a partial wrap of the Brougham can cover just the hood, roof, or mirror caps. These smaller areas are wrapped with less film and less labor than a full wrap. You can also choose a chrome delete for the window trim and badges.

Is a Brougham hard to wrap?

A Brougham is not the most complex car to wrap, but its size and trim add work. The 221.1 in (5,615 mm) body means long panels and more material, about 67 ft (20.5 m) of film. The bright window trim, handles, and badges must be removed or masked carefully.

How many generations of the Brougham does this page cover?

This page covers one generation of the Cadillac Brougham, produced from 1987 to 1992. It was offered as a four-door sedan only. All wrap estimates on this page apply to that generation.