Wraps by car

Cadillac Catera wrap

The Cadillac Catera wrap page covers the first generation sedan produced from 1996 to 2001. A full vinyl wrap of this full-size body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 67 ft (20.5 m).

1generations16.5 mof film for a full wrap

Cadillac Catera, first generation, factory photo
Cadillac Catera, first generation. Factory color shown.

Cadillac Catera wrap colors and ideas

  • Catera black wrap
  • Catera white wrap
  • Catera gray wrap
  • Catera silver wrap
  • Catera red wrap
  • Catera blue wrap
  • Catera green wrap
  • Catera yellow wrap
  • Catera orange wrap
  • Catera purple wrap
  • Catera pink wrap
  • Catera teal wrap
  • Catera brown wrap
  • Catera gold wrap
  • Catera chrome wrap
  • Catera color shift wrap
  • Catera carbon fiber wrap
  • Catera camo and patterned wrap

How much vinyl to wrap a Cadillac Catera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2001sedan (4 doors)194.1 in (4,930 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Catera wrap cost factors

Catera wrap cost depends on the area covered and the film type, because a full color change uses about 54 ft (16.5 m) of cast film while chrome or patterned options need about 67 ft (20.5 m). Prep work varies with paint condition, since panels may be original or repainted, and a test spot comes before a full wrap. Labor changes with trim removal, such as door handles, mirrors, and side moldings. A partial wrap or chrome delete uses less material and time than a full wrap.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Catera wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac Catera, first generation, factory photo
Factory color shown

1996–2001 Catera sedan (first generation)

1996–2001sedan (4 doors)194.1 in (4,930 mm)

The first generation Cadillac Catera from 1996 to 2001 may have original or repainted panels, so paint age affects wrap preparation. A test spot on each surface checks adhesion before the full wrap. Older paint can be more sensitive to adhesive and may lift when the film is repositioned. You should inspect every panel for clear coat failure before quoting.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Catera

A partial wrap on a Catera can cover the roof, hood, or mirror caps as separate jobs. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as a clear film on the front end. These smaller jobs let you change the car's look without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cadillac Catera: body, cut-outs and film

A Cadillac Catera vinyl wrap suits a single body style, a four-door sedan measuring 194.1 in (4,930 mm) long. The generous panels and upright sides keep installation straightforward, yet the overall area demands careful planning. You should order film for a full-size sedan rather than a compact. The long roof and hood are the largest uninterrupted surfaces.

Catera wrap ideas start with the bright window trim and badges, which are covered during a chrome delete. The door handles and mirrors come off for a cleaner edge, and the front and rear bumpers need recesses cut around lights and sensors. The side moldings are removed to wrap behind them. The grille surround is wrapped separately because it curves sharply.

When you work out how much vinyl to wrap a Catera, only one generation exists, the 1996–2001 sedan. No second body style or facelift changes the film estimate between years. Early and late cars share the same panel dimensions. You can use one cutting pattern for every production year.

Questions about wrapping a Cadillac Catera

How much vinyl does it take to wrap a Cadillac Catera?

A full wrap of a Cadillac Catera takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 67 ft (20.5 m). This estimate covers the first generation sedan produced from 1996 to 2001.

Can I wrap only the hood or the roof of a Catera?

Yes, you can wrap only the hood or the roof of a Catera. A partial wrap can also cover the mirror caps. These panels are wrapped as separate jobs without changing the whole car.

Is a Catera hard to wrap?

A Catera is not especially hard to wrap, but its full-size body at 194.1 in (4,930 mm) long adds labor. The door handles, mirrors, and side moldings come off for clean edges. Bright trim and badges need extra work during a chrome delete. Paint age can also affect preparation on a car of these years.

How many generations of the Catera does this page cover?

This page covers one generation of the Cadillac Catera, produced from 1996 to 2001. No other generations are in the catalog.