Wraps by car

Cadillac Fleetwood Brougham wrap

A Cadillac Fleetwood Brougham wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full color change. The catalog covers one generation, produced from 1977 to 1986. This luxury body is 221.0 in (5,613 mm) long. A chrome or patterned vinyl wrap takes about 74 ft (22.5 m).

1generations18.5 mof film for a full wrap

Cadillac Fleetwood Brougham, first generation, factory photo
Cadillac Fleetwood Brougham, first generation. Factory color shown.

Cadillac Fleetwood Brougham wrap colors and ideas

  • Fleetwood Brougham black wrap
  • Fleetwood Brougham white wrap
  • Fleetwood Brougham gray wrap
  • Fleetwood Brougham silver wrap
  • Fleetwood Brougham red wrap
  • Fleetwood Brougham blue wrap
  • Fleetwood Brougham green wrap
  • Fleetwood Brougham yellow wrap
  • Fleetwood Brougham orange wrap
  • Fleetwood Brougham purple wrap
  • Fleetwood Brougham pink wrap
  • Fleetwood Brougham teal wrap
  • Fleetwood Brougham brown wrap
  • Fleetwood Brougham gold wrap
  • Fleetwood Brougham chrome wrap
  • Fleetwood Brougham color shift wrap
  • Fleetwood Brougham carbon fiber wrap
  • Fleetwood Brougham camo and patterned wrap

How much vinyl to wrap a Cadillac Fleetwood Brougham

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1977–1986coupe, sedan (2 or 4 doors)221.0 in (5,613 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Fleetwood Brougham wrap cost factors

Fleetwood Brougham wrap cost depends on film type, body style, and the amount of chrome delete. A full color change on a coupe takes about 61 ft (18.5 m) of cast film, while a sedan needs a bit more. Chrome or patterned film raises the amount to about 74 ft (22.5 m). The 221.0 in (5,613 mm) body length also adds time for installers.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: coupe, sedan (2 or 4 doors).

Fleetwood Brougham wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac Fleetwood Brougham, first generation, factory photo
Factory color shown

1977–1986 Fleetwood Brougham coupe, sedan (first generation)

1977–1986coupe, sedan (2 or 4 doors)221.0 in (5,613 mm)

The first generation Cadillac Fleetwood Brougham, produced from 1977 to 1986, came as a coupe and a sedan. The coupe has two doors and a shorter roof, so the film estimate is lower than the sedan's. The sedan has four doors and a taller roof, which adds panels and film. The body style decides the panel plan and the film amount.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Fleetwood Brougham

A partial wrap on a Fleetwood Brougham can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film instead of a full color change. Paint protection film (PPF) is clear film applied to the front end to shield the paint from stone chips. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cadillac Fleetwood Brougham: body, cut-outs and film

The Cadillac Fleetwood Brougham vinyl wrap must handle a body 221.0 in (5,613 mm) long, so panels are cut from 60-inch (1.52 m) film. The coupe has two long doors and a fixed roof, while the sedan adds two more doors and a taller rear quarter. The sedan's extra doors require more film than the coupe. The wrap plan splits the long sides into sections that installers work in stages.

Fleetwood Brougham wrap ideas often include chrome delete on the wide window trim and badges. The door handles, locks, and antenna need cut-outs so the film does not interfere with them. The bumpers and side mirrors come off when the wrap calls for full edge coverage. The vinyl roof covering on some cars is left as is or wrapped only if the surface is sound.

To know how much vinyl to wrap a Fleetwood Brougham, compare the coupe and the sedan from the same generation. The coupe has two doors and a shorter roof, so it needs less film than the sedan. The sedan uses four doors and has a longer roof line, which adds to the film estimate. The chrome or patterned film estimate is about 74 ft (22.5 m) for either body style.

Questions about wrapping a Cadillac Fleetwood Brougham

How much vinyl does it take to wrap a Cadillac Fleetwood Brougham?

About 61 ft (18.5 m) of 60-inch (1.52 m) cast film wraps a Cadillac Fleetwood Brougham in a full color change. If the wrap uses chrome or patterned film, the amount rises to about 74 ft (22.5 m). The body is 221.0 in (5,613 mm) long, so the film is cut into sections for the hood, roof, sides, and bumpers.

Which Fleetwood Brougham body takes more film?

The sedan takes more film than the coupe because it has four doors instead of two and a taller roof. The coupe's shorter roof and two-door layout reduce the film estimate. Both body styles of the Fleetwood Brougham are 221.0 in (5,613 mm) long. The extra doors on the sedan add to the total film needed.

Can I wrap only the hood or the roof of a Fleetwood Brougham?

Yes, you can wrap only the hood or the roof of a Fleetwood Brougham. A partial wrap on the roof, hood, or mirror caps uses less film than a full color change. A chrome delete on the window trim and badges is also a smaller job. These options work when you want a specific look without covering the whole body.

Is a Fleetwood Brougham hard to wrap?

A Fleetwood Brougham is not hard to wrap, but its 221.0 in (5,613 mm) length adds work. The long flat sides and wide chrome trim need careful cutting and heat to avoid lifting. The door handles, locks, and antenna require cut-outs, and the bumpers come off for a clean edge. The vinyl roof on some cars can complicate adhesion.