Wraps by car

Cadillac Fleetwood wrap

The Cadillac Fleetwood wrap page covers three generations of this luxury sedan from 1956 to 1996. A full vinyl wrap of the newest body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that estimate to about 80 ft (24.5 m).

3generations21 mof film for a full wrap

Cadillac Fleetwood, third generation, factory photo
Cadillac Fleetwood, third generation. Factory color shown.

Cadillac Fleetwood wrap colors and ideas

  • Fleetwood black wrap
  • Fleetwood white wrap
  • Fleetwood gray wrap
  • Fleetwood silver wrap
  • Fleetwood red wrap
  • Fleetwood blue wrap
  • Fleetwood green wrap
  • Fleetwood yellow wrap
  • Fleetwood orange wrap
  • Fleetwood purple wrap
  • Fleetwood pink wrap
  • Fleetwood teal wrap
  • Fleetwood brown wrap
  • Fleetwood gold wrap
  • Fleetwood chrome wrap
  • Fleetwood color shift wrap
  • Fleetwood carbon fiber wrap
  • Fleetwood camo and patterned wrap

How much vinyl to wrap a Cadillac Fleetwood

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–1996sedan (4 doors)225.2 in (5,720 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1984–1992sedan (4 doors)205.1 in (5,210 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1956–1976sedan (4 doors)236.2 in (5,999 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Fleetwood wrap cost factors

Fleetwood wrap cost is driven by the car's size, film type, and paint condition. A full wrap of the 225.2 in (5,720 mm) third generation uses more material and labor than the smaller second generation. Chrome or patterned film adds about 11 ft (3.5 m) to the material estimate for any generation. The condition of the original paint also affects preparation time and therefore cost.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: sedan (4 doors).

Fleetwood wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac Fleetwood, third generation, factory photo
Factory color shown

1993–1996 Fleetwood sedan (third generation)

1993–1996sedan (4 doors)225.2 in (5,720 mm)

The 1993–1996 Cadillac Fleetwood is a sedan with four doors and a length of 225.2 in (5,720 mm). Paint age on a car of these years can vary, so panels may be original or repainted. A test spot should be applied before a full wrap to check adhesion on the existing finish.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Cadillac Fleetwood, second generation, factory photo
Factory color shown

1984–1992 Fleetwood sedan (second generation)

1984–1992sedan (4 doors)205.1 in (5,210 mm)

The 1984–1992 Cadillac Fleetwood is a sedan with four doors and a length of 205.1 in (5,210 mm). Its size and body style mean a full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) film. The number of panels is typical for a large sedan, with long doors and a sizable trunk lid.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Cadillac Fleetwood, first generation, factory photo
Factory color shown

1956–1976 Fleetwood sedan (first generation)

1956–1976sedan (4 doors)236.2 in (5,999 mm)

The 1956–1976 Cadillac Fleetwood is a sedan with four doors and a length of 236.2 in (5,999 mm). Its size and body style mean a full wrap uses about 76 ft (23 m) of 60-inch (1.52 m) film. The number of panels is high due to the long hood, large fenders, and extended rear quarters.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Fleetwood

Fleetwood chrome delete and partial wraps are practical options when a full color change is not needed. A partial wrap can cover the roof, hood, or mirror caps for a contrasting look. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end guards the long hood and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cadillac Fleetwood: body, cut-outs and film

The Cadillac Fleetwood vinyl wrap is shaped by its large sedan body and long wheelbase. The third generation measures 225.2 in (5,720 mm), so a vinyl wrap requires careful handling of the long roof and rear quarters. The second generation at 205.1 in (5,210 mm) still needs generous film allowances for its upright panels. The first generation is the longest at 236.2 in (5,999 mm), with deep fenders that use more material.

Fleetwood wrap ideas often involve addressing the extensive chrome trim and badging. The window surrounds, beltline moldings, and grille are best removed or masked before film application. Door handles and mirrors also come off for clean edges. The vinyl roof portion on earlier cars is a separate surface that can be wrapped or left as is.

How much vinyl to wrap a Fleetwood depends on the generation you own. The third generation needs about 69 ft (21 m) of standard cast film, while the second generation uses about 57 ft (17.5 m). The first generation requires the most at about 76 ft (23 m), due to its extra length and larger panels.

Questions about wrapping a Cadillac Fleetwood

How much vinyl does it take to wrap a Cadillac Fleetwood?

A Cadillac Fleetwood full wrap takes about 69 ft (21 m) of 60-inch (1.52 m) cast film for the 1993–1996 model. If you choose chrome or patterned film, plan for about 80 ft (24.5 m). These figures apply to the newest generation covered on this page.

Can I wrap only the hood or the roof of a Fleetwood?

Yes, you can wrap only the hood or the roof of a Fleetwood. A partial wrap commonly covers the roof, hood, or mirror caps. Chrome delete is another smaller job that covers the window trim and badges.

Is a Fleetwood hard to wrap?

Yes, a Fleetwood is hard to wrap because of its size and chrome details. The third generation is 225.2 in (5,720 mm) long, with large flat panels that need careful squeegeeing. The many chrome trim pieces around the windows and grille add time for removal or masking.

How many generations of the Fleetwood does this page cover?

This page covers three generations of the Cadillac Fleetwood. They are the first generation from 1956–1976, the second from 1984–1992, and the third from 1993–1996.