Wraps by car

Cadillac LSE wrap

The Cadillac LSE wrap page covers one generation of this full-size sedan, produced from 1993 to 1996. A complete color change wrap on the Cadillac LSE takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl film. Chrome or patterned film for the same car uses about 67 ft (20.5 m).

1generations16.5 mof film for a full wrap

Cadillac LSE, first generation, factory photo
Cadillac LSE, first generation. Factory color shown.

Cadillac LSE wrap colors and ideas

  • Cadillac LSE black wrap
  • Cadillac LSE white wrap
  • Cadillac LSE gray wrap
  • Cadillac LSE silver wrap
  • Cadillac LSE red wrap
  • Cadillac LSE blue wrap
  • Cadillac LSE green wrap
  • Cadillac LSE yellow wrap
  • Cadillac LSE orange wrap
  • Cadillac LSE purple wrap
  • Cadillac LSE pink wrap
  • Cadillac LSE teal wrap
  • Cadillac LSE brown wrap
  • Cadillac LSE gold wrap
  • Cadillac LSE chrome wrap
  • Cadillac LSE color shift wrap
  • Cadillac LSE carbon fiber wrap
  • Cadillac LSE camo and patterned wrap

How much vinyl to wrap a Cadillac LSE

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–1996sedan (4 doors)192.5 in (4,890 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Cadillac LSE wrap cost factors

The Cadillac LSE wrap cost depends mainly on the film area, and this full-size sedan needs about 54 ft (16.5 m) of 60-inch film for a full wrap. Chrome or patterned film raises the amount to about 67 ft (20.5 m) because of pattern matching. The cost also changes with the film brand, the finish, and how much disassembly the installer does on the 1993–1996 body.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Cadillac LSE wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac LSE, first generation, factory photo
Factory color shown

1993–1996 Cadillac LSE sedan (first generation)

1993–1996sedan (4 doors)192.5 in (4,890 mm)

The first generation Cadillac LSE was built from 1993 to 1996 as a full-size four-door sedan. Paint age on a car of these years means panels may be original or repainted, and a test spot comes before a full wrap. A test spot on each panel shows whether the film adheres evenly to old paint.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Cadillac LSE

A partial wrap on a Cadillac LSE covers the roof, hood, or mirror caps instead of the whole sedan. Cadillac LSE chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear urethane film applied to the front end of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cadillac LSE: body, cut-outs and film

The Cadillac LSE vinyl wrap has to cover a four-door sedan body that is 192.5 in (4,890 mm) long. The full-size body means large side panels, a long roof, and a trunk lid that need film. Wrapping a Cadillac LSE uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a standard color change. Patterned or chrome film adds waste from matching, so the estimate rises to about 67 ft (20.5 m).

Cadillac LSE wrap ideas often start with deleting the chrome window trim and badges, which are bright on this car. The door handles and mirrors come off for a clean install, and the bumpers need film cut around fog lights and trim. The front grille surround is a separate piece that can be wrapped in black or body color.

How much vinyl to wrap a Cadillac LSE depends on the body style, and every LSE is a four-door sedan. The first generation is the only body this page covers, produced from 1993 to 1996. Panel sizes do not change between years of this generation, so the film estimate stays the same.

Questions about wrapping a Cadillac LSE

How much vinyl does it take to wrap a Cadillac LSE?

A Cadillac LSE takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. The estimate for chrome or patterned film is about 67 ft (20.5 m) on the same car.

Can I wrap only the hood or the roof of a Cadillac LSE?

Yes, you can wrap only the hood or the roof of a Cadillac LSE. A partial wrap on this sedan includes the roof, hood, mirror caps, or a chrome delete on the window trim and badges.

Is a Cadillac LSE hard to wrap?

A Cadillac LSE is moderately hard to wrap because it is a full-size sedan at 192.5 in (4,890 mm) long. The large roof, long side panels, and trunk lid add work, and the chrome trim around the windows needs careful cutting.

How many generations of the Cadillac LSE does this page cover?

This page covers one generation of the Cadillac LSE. The only generation in the catalog is the first, produced from 1993 to 1996.