Wraps by car

Cadillac Series 62 wrap

The Cadillac Series 62 wrap guide covers seven generations from 1948 to 1964. The newest body is the seventh generation, which takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a vinyl wrap. Chrome or patterned film raises that figure to about 77 ft (23.5 m).

7generations18.5 mof film for a full wrap

Cadillac Series 62, seventh generation, factory photo
Cadillac Series 62, seventh generation. Factory color shown.

Cadillac Series 62 wrap colors and ideas

  • Series 62 black wrap
  • Series 62 white wrap
  • Series 62 gray wrap
  • Series 62 silver wrap
  • Series 62 red wrap
  • Series 62 blue wrap
  • Series 62 green wrap
  • Series 62 yellow wrap
  • Series 62 orange wrap
  • Series 62 purple wrap
  • Series 62 pink wrap
  • Series 62 teal wrap
  • Series 62 brown wrap
  • Series 62 gold wrap
  • Series 62 chrome wrap
  • Series 62 color shift wrap
  • Series 62 carbon fiber wrap
  • Series 62 camo and patterned wrap

How much vinyl to wrap a Cadillac Series 62

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1961–1964convertible, coupe, sedan (2 or 4 doors)215.0 in (5,461 mm) to 222.0 in (5,639 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
1959–1960convertible, coupe, sedan (2 or 4 doors)225.0 in (5,715 mm)about 61 ft (18.5 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)
1957–1958convertible, coupe, sedan (2 or 4 doors)215.9 in (5,484 mm) to 220.9 in (5,611 mm)about 61 ft (18.5 m) for the convertible to 69 ft (21 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1954–1956convertible, coupe, sedan (2 or 4 doors)223.4 in (5,674 mm)about 67 ft (20.5 m) for the coupe to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m)
1948–1953convertible, coupe, sedan (2 or 4 doors)214.0 in (5,436 mm)about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1942–1947convertible, coupe, sedan (2 or 4 doors)219.6 in (5,578 mm)about 67 ft (20.5 m) for the convertible to 70 ft (21.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)
1940–1941convertible, coupe, sedan (2 or 4 doors)216.0 in (5,486 mm)about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)

Series 62 wrap cost factors

Series 62 wrap cost depends on the body style, the film type, and the amount of labor. A sedan with four doors and a 225.0 in (5,715 mm) length needs more film than a convertible, which increases the job size. Chrome or patterned film uses up to about 80 ft (24.5 m) on some generations, which adds to the cost.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Series 62 wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac Series 62, seventh generation, factory photo
Factory color shown

1961–1964 Series 62 convertible, coupe, sedan (seventh generation)

1961–1964convertible, coupe, sedan (2 or 4 doors)215.0 in (5,461 mm) to 222.0 in (5,639 mm)

The Cadillac Series 62 seventh generation offers convertible, coupe, and sedan body styles. On a convertible, the fabric top is not wrapped and the film ends where it begins, but a folding hard top is wrapped as panels of its own. The car length spans 215.0 in (5,461 mm) to 222.0 in (5,639 mm) depending on the body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Cadillac Series 62, sixth generation, factory photo
Factory color shown

1959–1960 Series 62 convertible, coupe, sedan (sixth generation)

1959–1960convertible, coupe, sedan (2 or 4 doors)225.0 in (5,715 mm)

The Cadillac Series 62 sixth generation body style decides the panel plan and the film amount. A convertible needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, while a sedan takes about 64 ft (19.5 m). The coupe falls in between, and chrome or patterned film can push the total up to about 80 ft (24.5 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 61 ft (18.5 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Cadillac Series 62, fifth generation, factory photo
Factory color shown

1957–1958 Series 62 convertible, coupe, sedan (fifth generation)

1957–1958convertible, coupe, sedan (2 or 4 doors)215.9 in (5,484 mm) to 220.9 in (5,611 mm)

Paint age on a Cadillac Series 62 fifth generation car may be original or repainted after 1957–1958. Before a full wrap, a test spot on a panel shows whether the film will bond without pulling old paint when removed. Panels with weak paint need to be addressed before the vinyl goes on.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 61 ft (18.5 m) for the convertible to 69 ft (21 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Cadillac Series 62, fourth generation, factory photo
Factory color shown

1954–1956 Series 62 convertible, coupe, sedan (fourth generation)

1954–1956convertible, coupe, sedan (2 or 4 doors)223.4 in (5,674 mm)

The Cadillac Series 62 fourth generation measures 223.4 in (5,674 mm) long, which affects the film amount and panel count. A coupe needs about 67 ft (20.5 m) of film and a sedan about 69 ft (21 m). The extra length means more material per side than on shorter generations.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 67 ft (20.5 m) for the coupe to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).

Cadillac Series 62, third generation, factory photo
Factory color shown

1948–1953 Series 62 convertible, coupe, sedan (third generation)

1948–1953convertible, coupe, sedan (2 or 4 doors)214.0 in (5,436 mm)

The Cadillac Series 62 third generation is 214.0 in (5,436 mm) long, which sets the film area for each body style. A convertible uses about 64 ft (19.5 m) and a sedan about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The shorter body allows a more compact panel layout than later cars.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Cadillac Series 62, second generation, factory photo
Factory color shown

1942–1947 Series 62 convertible, coupe, sedan (second generation)

1942–1947convertible, coupe, sedan (2 or 4 doors)219.6 in (5,578 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 67 ft (20.5 m) for the convertible to 70 ft (21.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Cadillac Series 62, first generation, factory photo
Factory color shown

1940–1941 Series 62 convertible, coupe, sedan (first generation)

1940–1941convertible, coupe, sedan (2 or 4 doors)216.0 in (5,486 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 64 ft (19.5 m) for the convertible to 67 ft (20.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Series 62

The Cadillac Series 62 can get a partial wrap instead of a full color change. A roof, hood, or mirror caps can be wrapped alone, or you can get a chrome delete with window trim and badges covered in black film. Paint protection film (PPF) is another option, with clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cadillac Series 62: body, cut-outs and film

The Cadillac Series 62 vinyl wrap depends on the body style and size. The car came as a convertible, coupe, or sedan with 2 or 4 doors, with lengths from 214.0 in (5,436 mm) to 225.0 in (5,715 mm). A larger sedan needs more film than a convertible, and the number of panels changes with the body style.

Series 62 wrap ideas include planning for cut-outs and removable parts. Door handles, badges, mirrors, and trim pieces must be removed or cut around before the film is applied. Convertible bodies have a fabric top that is not wrapped and the film ends where it begins.

How much vinyl to wrap a Series 62 changes from one generation to another. The sixth generation sedan needs about 64 ft (19.5 m) of film, while the fifth generation coupe takes about 69 ft (21 m). Older fourth generation cars can use up to about 69 ft (21 m) for the sedan.

Questions about wrapping a Cadillac Series 62

How much vinyl does it take to wrap a Cadillac Series 62?

About 61 ft (18.5 m) of 60-inch (1.52 m) cast film is needed for a full wrap of the newest Cadillac Series 62 body, the seventh generation from 1961–1964. That figure is for a standard color change wrap on a typical body style.

Is the top of a Series 62 wrapped?

No, the top of a Series 62 is not wrapped when the car is a convertible with a fabric top. The film ends where the fabric begins, and the top remains uncovered. A folding hard top is wrapped as separate panels of its own.

Which Series 62 body takes more film?

The sedan takes the most film among Cadillac Series 62 body styles. For the sixth generation, a sedan needs about 64 ft (19.5 m) of film, while a convertible takes about 61 ft (18.5 m). The coupe sits in between those two amounts.

Can I wrap only the hood or the roof of a Series 62?

Yes, you can wrap only the hood or the roof of a Cadillac Series 62 as a partial wrap. A shop can also wrap just the mirror caps, or do a chrome delete on the window trim and badges. Paint protection film is another partial option, with clear film on the front end.