Wraps by car

Cadillac Sixty Special wrap

The Cadillac Sixty Special wrap page covers ten generations of the full-size sedan and gives film estimates for each body. A complete vinyl wrap of the newest body in this catalog, the 1971–1976 tenth generation, takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to about 80 ft (24.5 m).

10generations19.5 mof film for a full wrap

Cadillac Sixty Special, tenth generation, factory photo
Cadillac Sixty Special, tenth generation. Factory color shown.

Cadillac Sixty Special wrap colors and ideas

  • Sixty Special black wrap
  • Sixty Special white wrap
  • Sixty Special gray wrap
  • Sixty Special silver wrap
  • Sixty Special red wrap
  • Sixty Special blue wrap
  • Sixty Special green wrap
  • Sixty Special yellow wrap
  • Sixty Special orange wrap
  • Sixty Special purple wrap
  • Sixty Special pink wrap
  • Sixty Special teal wrap
  • Sixty Special brown wrap
  • Sixty Special gold wrap
  • Sixty Special chrome wrap
  • Sixty Special color shift wrap
  • Sixty Special carbon fiber wrap
  • Sixty Special camo and patterned wrap

How much vinyl to wrap a Cadillac Sixty Special

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1971–1976sedan (4 doors)228.8 in (5,812 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1965–1970sedan (4 doors)228.2 in (5,796 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1961–1964sedan (4 doors)223.0 in (5,664 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1959–1960sedan (4 doors)225.0 in (5,715 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1957–1958sedan (4 doors)225.3 in (5,723 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1954–1956sedan (4 doors)227.4 in (5,776 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1950–1953sedan (4 doors)224.9 in (5,712 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1948–1949sedan (4 doors)226.0 in (5,740 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1942–1947sedan (4 doors)224.8 in (5,710 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1938–1941sedan (4 doors)214.3 in (5,443 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Sixty Special wrap cost factors

Sixty Special wrap cost depends on the condition of the paint, the film finish and the amount of chrome you include. A 1971–1976 car may have original or repainted panels, so a test spot and surface prep can add labor before any film is cut. A full wrap of a 1957–1958 body uses about 70 ft (21.5 m) of film, which is more material than the other generations.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: sedan (4 doors).

Sixty Special wraps by generation

Swipe sideways. Tap a card for the full description.

Cadillac Sixty Special, tenth generation, factory photo
Factory color shown

1971–1976 Sixty Special sedan (tenth generation)

1971–1976sedan (4 doors)228.8 in (5,812 mm)

The 1971–1976 Cadillac Sixty Special is 228.8 in (5,812 mm) long and a full wrap of this sedan takes about 64 ft (19.5 m) of 60-inch cast film. On a car of these years the panels may be original or repainted, and a test spot comes before a full wrap. If the paint is weak or flaking, the film will not bond evenly and the surface must be corrected first.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Cadillac Sixty Special, ninth generation, factory photo
Factory color shown

1965–1970 Sixty Special sedan (ninth generation)

1965–1970sedan (4 doors)228.2 in (5,796 mm)

The 1965–1970 Cadillac Sixty Special is 228.2 in (5,796 mm) long and a four-door sedan. A full wrap of this body takes about 64 ft (19.5 m) of 60-inch cast film, with the roof and the long rear quarters as the largest single pieces. The four doors add eight shut lines and four handles, which means more trimming than on a two-door body.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Cadillac Sixty Special, eighth generation, factory photo
Factory color shown

1961–1964 Sixty Special sedan (eighth generation)

1961–1964sedan (4 doors)223.0 in (5,664 mm)

The 1961–1964 Cadillac Sixty Special is 223.0 in (5,664 mm) long, the shortest body in this catalog. A full wrap of this sedan takes about 62 ft (19 m) of 60-inch cast film, which is less than the later generations because the body is shorter. The four doors still require careful cutting around eight shut lines and four handles.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Cadillac Sixty Special, seventh generation, factory photo
Factory color shown

1959–1960 Sixty Special sedan (seventh generation)

1959–1960sedan (4 doors)225.0 in (5,715 mm)

The 1959–1960 Cadillac Sixty Special is 225.0 in (5,715 mm) long and a full wrap takes about 64 ft (19.5 m) of 60-inch cast film. The tall tailfins of these years add sharp compound curves that need more stretching and relief cuts than a flat panel. The roof is wide and long, so it is often wrapped as two pieces with a seam at the roof rail.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Cadillac Sixty Special, sixth generation, factory photo
Factory color shown

1957–1958 Sixty Special sedan (sixth generation)

1957–1958sedan (4 doors)225.3 in (5,723 mm)

The 1957–1958 Cadillac Sixty Special is 225.3 in (5,723 mm) long and a full wrap takes about 70 ft (21.5 m) of 60-inch cast film, more than any other generation here. The extra film comes from the large tailfins and the deep rear quarters, which need more material to cover the curves without overstretching. A chrome or patterned film raises the total to about 82 ft (25 m).

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Cadillac Sixty Special, fifth generation, factory photo
Factory color shown

1954–1956 Sixty Special sedan (fifth generation)

1954–1956sedan (4 doors)227.4 in (5,776 mm)

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Cadillac Sixty Special, fourth generation, factory photo
Factory color shown

1950–1953 Sixty Special sedan (fourth generation)

1950–1953sedan (4 doors)224.9 in (5,712 mm)

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Cadillac Sixty Special, third generation, factory photo
Factory color shown

1948–1949 Sixty Special sedan (third generation)

1948–1949sedan (4 doors)226.0 in (5,740 mm)

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Cadillac Sixty Special, second generation, factory photo
Factory color shown

1942–1947 Sixty Special sedan (second generation)

1942–1947sedan (4 doors)224.8 in (5,710 mm)

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Cadillac Sixty Special, first generation, factory photo
Factory color shown

1938–1941 Sixty Special sedan (first generation)

1938–1941sedan (4 doors)214.3 in (5,443 mm)

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Sixty Special

A Sixty Special chrome delete covers the window trim and badges in black film, which is a smaller job than a full color change wrap. A partial wrap of the roof, hood and mirror caps is a good way to change the look without wrapping the whole 228.8 in (5,812 mm) body. Paint protection film (PPF) on the front end protects the hood, fenders and mirror caps from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cadillac Sixty Special: body, cut-outs and film

A Cadillac Sixty Special vinyl wrap is a large project because every generation is a four-door full-size sedan over 223 in (5,664 mm) long. The long hood, roof and trunk lid are large single panels that need wide film and careful handling. Four doors add eight shut lines and four door handles, which is more cutting and tucking than on a two-door car.

Sixty Special wrap ideas often depend on how much of the original bright trim you want to cover. Window trim, door handles, mirrors and badges can be wrapped in a matching finish or left exposed, and each choice changes the amount of film and the cutting time. The front and rear bumpers stay off the estimate unless you plan a chrome delete.

To know how much vinyl to wrap a Sixty Special, compare the film estimates by generation. The 1957–1958 sixth generation needs about 70 ft (21.5 m) of cast film, the largest amount in this catalog. The 1961–1964 eighth generation needs about 62 ft (19 m), the smallest amount, and the other generations sit at about 64 ft (19.5 m).

Questions about wrapping a Cadillac Sixty Special

How much vinyl does it take to wrap a Cadillac Sixty Special?

A Cadillac Sixty Special takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full wrap of the 1971–1976 body. If you choose chrome or patterned film instead of a solid color, the estimate rises to about 80 ft (24.5 m) because the film must be matched across more panels and wrapped around trim.

Can I wrap only the hood or the roof of a Sixty Special?

Yes, you can wrap only the hood or the roof of a Sixty Special. A partial wrap of the roof, hood and mirror caps uses much less film than a full wrap and still changes the look of the car. A chrome delete on the window trim and badges is another option that does not require covering the large body panels.

Is a Sixty Special hard to wrap?

A Sixty Special is not hard to wrap, but the size and the four doors add work. The body is over 223 in (5,664 mm) long, so most panels are wider than the film and need seams or multiple people to handle. The tall tailfins on the 1957–1960 models have sharp curves that require more stretching and relief cuts.

How many generations of the Sixty Special does this page cover?

This page covers ten generations of the Cadillac Sixty Special, from the 1957–1958 sixth generation to the 1971–1976 tenth generation. Each generation is listed with its production years, body length and a film estimate for a full wrap.