Wraps by car

Datsun Bluebird wrap

The Datsun Bluebird wrap page covers the first generation from 1976 to 1981. A full wrap of this mid-size car uses about 46 ft (14 m) of vinyl for the coupe and 48 ft (14.5 m) for the sedan. The film estimate is based on 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Datsun Bluebird, first generation, factory photo
Datsun Bluebird, first generation. Factory color shown.

Datsun Bluebird wrap colors and ideas

  • Bluebird black wrap
  • Bluebird white wrap
  • Bluebird gray wrap
  • Bluebird silver wrap
  • Bluebird red wrap
  • Bluebird blue wrap
  • Bluebird green wrap
  • Bluebird yellow wrap
  • Bluebird orange wrap
  • Bluebird purple wrap
  • Bluebird pink wrap
  • Bluebird teal wrap
  • Bluebird brown wrap
  • Bluebird gold wrap
  • Bluebird chrome wrap
  • Bluebird color shift wrap
  • Bluebird carbon fiber wrap
  • Bluebird camo and patterned wrap

How much vinyl to wrap a Datsun Bluebird

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1976–1981coupe, sedan (2 or 4 doors)167.7 in (4,260 mm)about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

Bluebird wrap cost factors

Bluebird wrap cost depends on the film amount, the body style, and the labor for cut-outs. A sedan needs about 48 ft (14.5 m) of film, while a coupe needs about 46 ft (14 m), so the sedan uses slightly more material. If you choose chrome or patterned film, the total can rise to about 59 ft (18 m). The number of doors and chrome parts also changes the installation time.

  • Film for a full wrap: about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: coupe, sedan (2 or 4 doors).

Bluebird wraps by generation

Swipe sideways. Tap a card for the full description.

Datsun Bluebird, first generation, factory photo
Factory color shown

1976–1981 Bluebird coupe, sedan (first generation)

1976–1981coupe, sedan (2 or 4 doors)167.7 in (4,260 mm)

The first generation Datsun Bluebird offers two body styles: coupe and sedan with 2 or 4 doors. The style decides the panel plan and the film amount. The coupe is a two-door design that needs about 46 ft (14 m) of film. The four-door sedan adds two doors and needs about 48 ft (14.5 m).

Film: about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Bluebird

A partial wrap on a Datsun Bluebird can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are wrapped in black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap and still change the look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Datsun Bluebird: body, cut-outs and film

A Datsun Bluebird vinyl wrap plan starts with the body style and length. The coupe and sedan both measure 167.7 in (4,260 mm) long, but the sedan has two extra doors. More doors add seams and film, so the sedan needs about 48 ft (14.5 m) of film. The coupe needs about 46 ft (14 m).

Bluebird wrap ideas should account for the small chrome parts on this car. Window trim and badges are easy to cover with black film for a chrome delete. The door handles and mirrors also need careful cutting or removal. Plan for cut-outs around the door locks and antenna.

To figure how much vinyl to wrap a Bluebird, count the doors and roof area. This generation has one body length for coupe and sedan, so the difference is in the panel count. A coupe has two doors and a longer front door, which can take a bit less film than four shorter doors. Always add extra for mistakes or pattern matching.

Questions about wrapping a Datsun Bluebird

How much vinyl does it take to wrap a Datsun Bluebird?

About 46 ft (14 m) of vinyl for the coupe or 48 ft (14.5 m) for the sedan, based on 60-inch (1.52 m) cast film. The exact amount for a Datsun Bluebird wrap depends on the body style, panel layout, and installer waste. The first generation has only these two body styles, so the film estimate stays close to those figures.

Which Bluebird body takes more film?

The sedan takes more film than the coupe. The sedan needs about 48 ft (14.5 m) of film, while the coupe needs about 46 ft (14 m). The extra two doors on the sedan add seams and material. Both bodies are 167.7 in (4,260 mm) long, so the difference comes from the door count.

Can I wrap only the hood or the roof of a Bluebird?

Yes, you can wrap only the hood or the roof of a Bluebird. A partial wrap on the roof or hood is a smaller job that uses less film than a full wrap. You can also choose mirror caps or a chrome delete on the window trim and badges. Paint protection film on the front end is another partial option.

Is a Bluebird hard to wrap?

A Bluebird is moderately hard to wrap because of its size and small chrome parts. The car is 167.7 in (4,260 mm) long, which means large panels on the roof and hood. The window trim and badges need careful cutting for a chrome delete. The four-door sedan adds extra door seams that take more time.