Wraps by car

Datsun on-DO wrap

A Datsun on-DO wrap covers the subcompact sedan in vinyl film. The catalog lists one generation, built from 2014 to the present day. A full wrap of the newest body uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 62 ft (19 m).

1generations16.5 mof film for a full wrap

Datsun on-DO, first generation, factory photo
Datsun on-DO, first generation. Factory color shown.

Datsun on-DO wrap colors and ideas

  • on-DO black wrap
  • on-DO white wrap
  • on-DO gray wrap
  • on-DO silver wrap
  • on-DO red wrap
  • on-DO blue wrap
  • on-DO green wrap
  • on-DO yellow wrap
  • on-DO orange wrap
  • on-DO purple wrap
  • on-DO pink wrap
  • on-DO teal wrap
  • on-DO brown wrap
  • on-DO gold wrap
  • on-DO chrome wrap
  • on-DO color shift wrap
  • on-DO carbon fiber wrap
  • on-DO camo and patterned wrap

How much vinyl to wrap a Datsun on-DO

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowsedan (4 doors)170.7 in (4,337 mm) to 171.1 in (4,345 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

on-DO wrap cost factors

An on-DO wrap cost depends on the size of the car and the film chosen. The 170.7 in (4,337 mm) to 171.1 in (4,345 mm) length sets a base of about 54 ft (16.5 m) of film. Cast film, chrome, or a pattern raises that to 62 ft (19 m) and changes the labor. Cut-outs for sensors and fog lamps on some trims add fitting time.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

on-DO wraps by generation

Swipe sideways. Tap a card for the full description.

Datsun on-DO, first generation, factory photo
Factory color shown

2014–now on-DO sedan (first generation)

2014–nowsedan (4 doors)170.7 in (4,337 mm) to 171.1 in (4,345 mm)

The first generation Datsun on-DO was restyled in 2019. Its bumpers and lights changed, so film cut for one version does not fit the other. The overall length shifted within a small range, from 170.7 in (4,337 mm) to 171.1 in (4,345 mm). Only the front and rear film pieces differ between the early and late cars.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on an on-DO

A partial wrap on an on-DO can cover the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film on the front end. These jobs use less material and leave the door panels untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Datsun on-DO: body, cut-outs and film

The Datsun on-DO vinyl wrap wraps a four-door sedan body. Its length runs from 170.7 in (4,337 mm) to 171.1 in (4,345 mm), a size that keeps film use moderate. The straight side panels and simple roof make plotter cutting easy. Door handles and mirrors still need careful inlays for a clean finish.

on-DO wrap ideas start with the flat body sides and bumpers. Some trims have parking sensors in the bumpers, and the film is cut around each sensor. Some trims have fog lamps in the front bumper, so cut-outs in the bumper film keep those lights clear. Door handles and mirrors come off for tidy edges, while badges are removed and reapplied.

How much vinyl to wrap an on-DO stays the same across its one generation. The 2019 restyling changed bumpers and lights, but the metal panels did not grow. Film cut for one version does not fit the other around those new parts. Plan from the 54 ft (16.5 m) figure unless chrome or a pattern raises the need to 62 ft (19 m).

Questions about wrapping a Datsun on-DO

How much vinyl does it take to wrap a Datsun on-DO?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a Datsun on-DO. The sedan's length of 170.7 in (4,337 mm) to 171.1 in (4,345 mm) drives that figure. Chrome or patterned film needs about 62 ft (19 m) for the extra design work.

Which years of the on-DO take the same film cuts?

The same film cuts fit the on-DO from 2014 until the 2019 restyling, and again from 2019 to now. The bumpers and lights changed in 2019, so early and late cars need different front and rear pieces. The body sides and roof did not change in that update.

Can I wrap only the hood or the roof of an on-DO?

Yes, an on-DO can be wrapped only on the hood or the roof. A partial wrap covers the roof, hood, or mirror caps as separate jobs. The rest of the car keeps its paint, and the work uses less film than a full wrap.

Is an on-DO hard to wrap?

An on-DO is a straightforward wrap, but a few details add work. The subcompact size keeps the job manageable, with 54 ft (16.5 m) of film for a full wrap. Some trims have parking sensors and fog lamps that need careful cut-outs in the bumpers. The 2019 restyling means the front and rear film pieces must match the car's version.