Wraps by car

Datsun Cherry wrap

The Datsun Cherry wrap page covers the first two generations of this compact car, built from 1970 to 1978. A full vinyl wrap of the newest Cherry body takes about 41 ft (12.5 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film. The first generation needs slightly less film, from about 38 ft (11.5 m) to 43 ft (13 m).

2generations12.5 mof film for a full wrap

Datsun Cherry, second generation, factory photo
Datsun Cherry, second generation. Factory color shown.

Datsun Cherry wrap colors and ideas

  • Cherry black wrap
  • Cherry white wrap
  • Cherry gray wrap
  • Cherry silver wrap
  • Cherry red wrap
  • Cherry blue wrap
  • Cherry green wrap
  • Cherry yellow wrap
  • Cherry orange wrap
  • Cherry purple wrap
  • Cherry pink wrap
  • Cherry teal wrap
  • Cherry brown wrap
  • Cherry gold wrap
  • Cherry chrome wrap
  • Cherry color shift wrap
  • Cherry carbon fiber wrap
  • Cherry camo and patterned wrap

How much vinyl to wrap a Datsun Cherry

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1978coupe, sedan, wagon (2 or 3 or 4 doors)150.6 in (3,825 mm)about 41 ft (12.5 m) for the coupe to 46 ft (14 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1970–1974coupe, hatchback (2 or 3 doors)142.0 in (3,607 mm)about 38 ft (11.5 m) for the coupe to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 52 ft (16 m)

Cherry wrap cost factors

Cherry wrap cost depends on the body style, the generation, and the amount of film the job uses. A second-generation wagon needs more vinyl than a first-generation coupe, so it costs more in material and labor. Paint condition also matters: an older car with failing paint needs more prep. The number of cut-outs and removed parts, like the tailgate glass, adds time.

  • Film for a full wrap: about 41 ft (12.5 m) for the coupe to 46 ft (14 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: coupe, sedan, wagon (2 or 3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Cherry wraps by generation

Swipe sideways. Tap a card for the full description.

Datsun Cherry, second generation, factory photo
Factory color shown

1974–1978 Cherry coupe, sedan, wagon (second generation)

1974–1978coupe, sedan, wagon (2 or 3 or 4 doors)150.6 in (3,825 mm)

The second-generation Datsun Cherry came as a coupe, sedan, or wagon, and the style decides the panel plan and the film amount. The coupe is the shortest job at about 41 ft (12.5 m), while the wagon needs up to 46 ft (14 m). The sedan falls between the two in material use. The wagon's extra rear sections and larger roof explain the difference.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) for the coupe to 46 ft (14 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Datsun Cherry, first generation, factory photo
Factory color shown

1970–1974 Cherry coupe, hatchback (first generation)

1970–1974coupe, hatchback (2 or 3 doors)142.0 in (3,607 mm)

On a first-generation Datsun Cherry, paint age matters before a full wrap. Panels from 1970 to 1974 may be original or repainted, and old paint can fail under film. A test spot on a small area shows whether the surface is stable enough. If the paint is weak, the wrap may lift or damage it during removal.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) for the coupe to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Cherry

Partial wrap options for the Datsun Cherry include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These smaller jobs protect or change the look without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Datsun Cherry: body, cut-outs and film

The Datsun Cherry vinyl wrap is shaped by its small body styles: coupe, sedan, and wagon across two generations. The second generation is 150.6 in (3,825 mm) long and needs more material than the first, which measures 142.0 in (3,607 mm). A wagon or hatchback adds rear panel area compared to the coupe. These compact dimensions keep the wrap project manageable for one installer.

Cherry wrap ideas start with the tailgate, which has the rear glass set into it. The film ends at the edge of the glass, so the installer trims carefully around the window. Door handles, mirrors, and badges come off before the wrap. Chrome trim can be covered with black film for a chrome delete.

How much vinyl to wrap a Cherry depends on which generation and body style you have. The first generation coupe uses about 38 ft (11.5 m), while the second generation wagon needs about 46 ft (14 m). Adding chrome or patterned film can bring the total to 59 ft (18 m) on the newer body. These numbers help you buy the right amount before the job.

Questions about wrapping a Datsun Cherry

How much vinyl does it take to wrap a Datsun Cherry?

A full wrap of the newest Datsun Cherry body takes about 41 ft (12.5 m) to 46 ft (14 m) of 60-inch (1.52 m) cast film. The exact amount depends on whether you wrap a coupe, sedan, or wagon. The first generation uses slightly less, from 38 ft (11.5 m) to 43 ft (13 m).

Which Cherry body takes more film?

The second-generation Datsun Cherry wagon takes more film than the coupe, about 46 ft (14 m) versus 41 ft (12.5 m). The sedan also uses more than the coupe but less than the wagon. In the first generation, the hatchback needs about 43 ft (13 m) compared to 38 ft (11.5 m) for the coupe.

Can I wrap only the hood or the roof of a Cherry?

Yes, you can wrap only the hood or the roof of a Datsun Cherry. A partial wrap can cover the roof, hood, and mirror caps. A chrome delete is another smaller job, covering window trim and badges with black film. Clear paint protection film on the front end is also a partial option.

Is a Cherry hard to wrap?

A Datsun Cherry is not hard to wrap, but the tailgate with the rear glass in it adds work. The film must be trimmed to the edge of the glass on both generations. The compact size, from 142.0 in (3,607 mm) to 150.6 in (3,825 mm), keeps the panels small and easy to handle. Removing door handles and badges takes extra time.