Wraps by car

Datsun GO wrap

The Datsun GO wrap page covers the first-generation Datsun GO, a subcompact available from 2014 to now. A full vinyl wrap takes about 49 ft (15 m) for the hatchback and about 57 ft (17.5 m) for the van using 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

Datsun GO, first generation, factory photo
Datsun GO, first generation. Factory color shown.

Datsun GO wrap colors and ideas

  • Datsun GO black wrap
  • Datsun GO white wrap
  • Datsun GO gray wrap
  • Datsun GO silver wrap
  • Datsun GO red wrap
  • Datsun GO blue wrap
  • Datsun GO green wrap
  • Datsun GO yellow wrap
  • Datsun GO orange wrap
  • Datsun GO purple wrap
  • Datsun GO pink wrap
  • Datsun GO teal wrap
  • Datsun GO brown wrap
  • Datsun GO gold wrap
  • Datsun GO chrome wrap
  • Datsun GO color shift wrap
  • Datsun GO carbon fiber wrap
  • Datsun GO camo and patterned wrap

How much vinyl to wrap a Datsun GO

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowhatchback, van (5 doors)149.0 in (3,785 mm) to 157.3 in (3,995 mm)about 49 ft (15 m) for the hatchback to 57 ft (17.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Datsun GO wrap cost factors

The Datsun GO wrap cost depends on the body style, the film type, and the condition of the paint. The van takes about 57 ft (17.5 m) of film, which is more than the 49 ft (15 m) for the hatchback. Chrome or patterned film raises the film amount to about 66 ft (20 m). Labor is higher when the sliding door tracks and tailgate glass need careful cutting.

  • Film for a full wrap: about 49 ft (15 m) for the hatchback to 57 ft (17.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: hatchback, van (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Datsun GO wraps by generation

Swipe sideways. Tap a card for the full description.

Datsun GO, first generation, factory photo
Factory color shown

2014–now Datsun GO hatchback, van (first generation)

2014–nowhatchback, van (5 doors)149.0 in (3,785 mm) to 157.3 in (3,995 mm)

The first-generation Datsun GO has sliding side doors, and the door tracks stay bare. The film is cut along the tracks, so the tracks decide where the edge of the film sits. This is a standard detail on a van body. A wrap installer leaves the track area unwrapped so the door can still slide.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) for the hatchback to 57 ft (17.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Datsun GO

A partial wrap on a Datsun GO can cover the roof, the hood, or the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Datsun GO: body, cut-outs and film

The Datsun GO vinyl wrap has to handle two different body styles: a hatchback and a van, both with five doors. The hatchback is 149.0 in (3,785 mm) long, while the van is 157.3 in (3,995 mm) long. This difference in length explains why the two bodies need different amounts of film. A wrap installer measures each body style separately before cutting the film.

The Datsun GO wrap ideas start with the tailgate, which has the rear glass in it. The film is cut to end at the edge of the glass, so the glass area stays clear. The sliding side doors have door tracks that stay bare, and the film is cut along them. This makes the door tracks a natural break line for a two-tone design.

How much vinyl to wrap a Datsun GO depends on the body style, since the van is longer than the hatchback. The hatchback needs about 49 ft (15 m) of film, while the van needs about 57 ft (17.5 m). Chrome or patterned film can require up to about 66 ft (20 m) on either body. The first generation has kept the same two body styles since 2014.

Questions about wrapping a Datsun GO

How much vinyl does it take to wrap a Datsun GO?

A Datsun GO takes about 49 ft (15 m) for the hatchback and about 57 ft (17.5 m) for the van, using 60-inch (1.52 m) cast film. The difference comes from the van being longer than the hatchback. A full wrap of the newest body uses the figure for its body style.

Are the sliding doors of a Datsun GO wrapped?

The sliding doors of a Datsun GO are wrapped, but the door tracks stay bare. The film is cut along the tracks so the door can still slide. The tracks become a visible break line in the wrap.

Which Datsun GO body takes more film?

The van body of the Datsun GO takes more film than the hatchback. The van needs about 57 ft (17.5 m) of film, while the hatchback needs about 49 ft (15 m). The van is 157.3 in (3,995 mm) long, which is longer than the hatchback at 149.0 in (3,785 mm).

Can I wrap only the hood or the roof of a Datsun GO?

Yes, you can wrap only the hood or the roof of a Datsun GO. A partial wrap can also cover the mirror caps. A chrome delete covers the window trim and badges, while paint protection film (PPF) is a clear film for the front end.