Wraps by car

Datsun mi-DO wrap

A Datsun mi-DO wrap covers the body of this subcompact hatchback with cast vinyl film. The page covers one generation, produced from 2014 to 2021. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Datsun mi-DO, first generation, factory photo
Datsun mi-DO, first generation. Factory color shown.

Datsun mi-DO wrap colors and ideas

  • mi-DO black wrap
  • mi-DO white wrap
  • mi-DO gray wrap
  • mi-DO silver wrap
  • mi-DO red wrap
  • mi-DO blue wrap
  • mi-DO green wrap
  • mi-DO yellow wrap
  • mi-DO orange wrap
  • mi-DO purple wrap
  • mi-DO pink wrap
  • mi-DO teal wrap
  • mi-DO brown wrap
  • mi-DO gold wrap
  • mi-DO chrome wrap
  • mi-DO color shift wrap
  • mi-DO carbon fiber wrap
  • mi-DO camo and patterned wrap

How much vinyl to wrap a Datsun mi-DO

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2021hatchback (5 doors)155.5 in (3,950 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

mi-DO wrap cost factors

mi-DO wrap cost depends on the amount of film, the number of cut-outs, and the condition of the paint. A full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 59 ft (18 m). Extra work for parking sensors, fog lamps, or decorative moldings adds to the total.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

mi-DO wraps by generation

Swipe sideways. Tap a card for the full description.

Datsun mi-DO, first generation, factory photo
Factory color shown

2014–2021 mi-DO hatchback (first generation)

2014–2021hatchback (5 doors)155.5 in (3,950 mm)

The first generation Datsun mi-DO is a subcompact five-door hatchback with a length of 155.5 in (3,950 mm). The small size means a full wrap requires about 51 ft (15.5 m) of 60-inch (1.52 m) film, which is less than many larger cars. The five doors add two extra side panels compared to a three-door hatchback.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a mi-DO

For a mi-DO chrome delete, the job covers the window trim, decorative moldings, and badges with black film. A partial wrap can also be done on the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Datsun mi-DO: body, cut-outs and film

A Datsun mi-DO vinyl wrap uses the car’s compact size and five-door hatchback body as the main layout. The body is 155.5 in (3,950 mm) long, which keeps individual panels small. This means a full wrap needs fewer large sheets than a bigger sedan, but the tailgate and bumper shapes still require careful planning.

mi-DO wrap ideas must account for the tailgate, which has the rear glass set into it, so the film ends at the edge of the glass. Some trims have bright decorative moldings, parking sensors in the bumpers, or fog lamps in the front bumper. Each of these parts needs either cut-outs in the film or a separate treatment, like chrome delete for the moldings.

How much vinyl to wrap a mi-DO depends on the generation, but this page covers only the first generation. All mi-DO units from 2014 to 2021 share the same body style and length. For a full wrap, the film estimate does not change between years because the panel sizes are the same.

Questions about wrapping a Datsun mi-DO

How much vinyl does it take to wrap a Datsun mi-DO?

A full wrap of a Datsun mi-DO takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. That estimate is for the newest body style, which is the only generation produced. If you use chrome or patterned film, the amount goes up to about 59 ft (18 m).

Can I wrap only the hood or the roof of a mi-DO?

Yes, you can wrap only the hood or the roof of a mi-DO. A partial wrap can cover the roof, hood, or mirror caps. These smaller jobs use less film and take less time than a full wrap.

Is a mi-DO hard to wrap?

A mi-DO is not especially hard to wrap, but some parts add work. The tailgate includes the rear glass, so the film must end at the glass edge. Some trims have parking sensors in the bumpers, fog lamps in the front bumper, or bright moldings that need cut-outs or separate handling.

How many generations of the mi-DO does this page cover?

This page covers one generation of the mi-DO. The first generation was produced from 2014 to 2021. There are no other generations in this catalog.