Wraps by car

De Tomaso Longchamp wrap

The De Tomaso Longchamp wrap covers the first generation sports coupe built from 1972 to 1989. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 57 ft (17.5 m). This page explains the vinyl wrap process for the De Tomaso Longchamp.

1generations15.5 mof film for a full wrap

De Tomaso Longchamp, first generation, factory photo
De Tomaso Longchamp, first generation. Factory color shown.

De Tomaso Longchamp wrap colors and ideas

  • Longchamp black wrap
  • Longchamp white wrap
  • Longchamp gray wrap
  • Longchamp silver wrap
  • Longchamp red wrap
  • Longchamp blue wrap
  • Longchamp green wrap
  • Longchamp yellow wrap
  • Longchamp orange wrap
  • Longchamp purple wrap
  • Longchamp pink wrap
  • Longchamp teal wrap
  • Longchamp brown wrap
  • Longchamp gold wrap
  • Longchamp chrome wrap
  • Longchamp color shift wrap
  • Longchamp carbon fiber wrap
  • Longchamp camo and patterned wrap

How much vinyl to wrap a De Tomaso Longchamp

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1972–1989coupe (2 doors)181.1 in (4,600 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Longchamp wrap cost factors

The Longchamp wrap cost depends on the film type and the amount of vinyl needed for this car. A full De Tomaso Longchamp wrap takes about 51 ft (15.5 m) of film for standard colors. Chrome or patterned film raises the film needed to about 57 ft (17.5 m). The cost also changes with the condition of the paint and how many parts are removed.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Longchamp wraps by generation

Swipe sideways. Tap a card for the full description.

De Tomaso Longchamp, first generation, factory photo
Factory color shown

1972–1989 Longchamp coupe (first generation)

1972–1989coupe (2 doors)181.1 in (4,600 mm)

The first generation De Tomaso Longchamp was built from 1972 to 1989 as a coupe. Paint age matters on a car of these years, since panels may be original or repainted. A test spot comes before a full wrap to check that the vinyl adheres well to the old paint. The Longchamp is a sports car with a 181.1 in (4,600 mm) long body.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Longchamp

A partial wrap on a De Tomaso Longchamp can cover the roof, hood, or mirror caps. A Longchamp chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also offered as clear film on the front end of the Longchamp. These smaller jobs use less vinyl than a full De Tomaso Longchamp wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a De Tomaso Longchamp: body, cut-outs and film

The De Tomaso Longchamp vinyl wrap works with a single coupe body style and two long side doors. The car is 181.1 in (4,600 mm) long, so a full wrap needs large film panels. Each door is one large piece of film, which makes the De Tomaso Longchamp wrap smoother. The clean body lines help the vinyl wrap follow the shape of the car.

Longchamp wrap ideas start with the two long side doors, where each door is one large piece of film. The door handles and mirrors are removed for a clean vinyl wrap finish. The window trim and badges can be covered with black film for a chrome delete. The roof and hood are separate panels that can be wrapped in a contrasting color.

When counting how much vinyl to wrap a Longchamp, the first generation has one body style from 1972 to 1989. The coupe shape and long doors mean the film estimate is about 51 ft (15.5 m) of cast film. A De Tomaso Longchamp wrap with chrome or patterned film uses about 57 ft (17.5 m). The same body style ran through the whole production of the Longchamp.

Questions about wrapping a De Tomaso Longchamp

How much vinyl does it take to wrap a De Tomaso Longchamp?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a De Tomaso Longchamp. That figure is for the newest body style of the first generation. With chrome or patterned film, the amount goes up to about 57 ft (17.5 m). The Longchamp is a two-door coupe with long side doors.

Can I wrap only the hood or the roof of a Longchamp?

Yes, you can wrap only the hood or the roof of a Longchamp. A partial wrap covers the roof, hood, or mirror caps as separate jobs. You can also choose a chrome delete on the window trim and badges. Paint protection film on the front end is another partial option for the De Tomaso Longchamp.

Is a Longchamp hard to wrap?

The De Tomaso Longchamp is not especially hard to wrap, but the long doors add work. Each door is one large piece of film, so a second installer helps keep the panel smooth. The 181.1 in (4,600 mm) body length means a full wrap takes careful planning. The simple coupe shape of the Longchamp is easy to follow with vinyl.

How many generations of the Longchamp does this page cover?

This page covers one generation of the De Tomaso Longchamp. The first generation ran from 1972 to 1989 as a coupe with two doors. All Longchamp models in the catalog share the same body style and dimensions. A full wrap of the De Tomaso Longchamp uses the same film estimate for all years.