Wraps by car

De Tomaso Vallelunga wrap

The De Tomaso Vallelunga wrap page covers the first generation, produced from 1964 to 1968. It details the coupe body style and the amount of vinyl wrap needed. A full wrap of this classic sports car takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

De Tomaso Vallelunga, first generation, factory photo
De Tomaso Vallelunga, first generation. Factory color shown.

De Tomaso Vallelunga wrap colors and ideas

  • Vallelunga black wrap
  • Vallelunga white wrap
  • Vallelunga gray wrap
  • Vallelunga silver wrap
  • Vallelunga red wrap
  • Vallelunga blue wrap
  • Vallelunga green wrap
  • Vallelunga yellow wrap
  • Vallelunga orange wrap
  • Vallelunga purple wrap
  • Vallelunga pink wrap
  • Vallelunga teal wrap
  • Vallelunga brown wrap
  • Vallelunga gold wrap
  • Vallelunga chrome wrap
  • Vallelunga color shift wrap
  • Vallelunga carbon fiber wrap
  • Vallelunga camo and patterned wrap

How much vinyl to wrap a De Tomaso Vallelunga

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1964–1968coupe (2 doors)166.5 in (4,230 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Vallelunga wrap cost factors

The Vallelunga wrap cost depends on the condition of the original paint and the film you choose. This car is 166.5 in (4,230 mm) long, so a full wrap uses about 46 ft (14 m) of cast film. A chrome or patterned film requires about 52 ft (16 m), adding to the material amount. The labor changes if the paint is cracked or if panels need more prep work.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Vallelunga wraps by generation

Swipe sideways. Tap a card for the full description.

De Tomaso Vallelunga, first generation, factory photo
Factory color shown

1964–1968 Vallelunga coupe (first generation)

1964–1968coupe (2 doors)166.5 in (4,230 mm)

The first generation De Tomaso Vallelunga was built from 1964 to 1968. Paint age is the main concern: panels may be original or repainted during those years. A test spot of film on the paint comes before a full wrap to check adhesion. This step protects the old finish and shows where filler or primer lies underneath.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Vallelunga

A partial wrap on a Vallelunga includes the roof, hood, or mirror caps as separate areas. Vallelunga chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be combined.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a De Tomaso Vallelunga: body, cut-outs and film

The De Tomaso Vallelunga vinyl wrap suits a compact coupe with two long side doors. Its overall length of 166.5 in (4,230 mm) means the body has fewer square feet than larger sports cars. Each door is one large piece of film, reducing seam lines. A single installer can manage most panels without a second pair of hands.

Vallelunga wrap ideas include a satin color change that follows the low nose and short tail. The chrome trim around the side windows can be covered with black film, a process known as chrome delete. The door handles are simple and can stay in place during wrapping. The front and rear badges come off for a clean surface.

The answer to how much vinyl to wrap a Vallelunga is based on the only body style in this catalog. With one generation covered, there is no need to adjust film area between early and late cars. The estimate of 46 ft (14 m) assumes a standard cast film in a 60-inch (1.52 m) width. Ordering extra film is wise if the paint shows old repairs.

Questions about wrapping a De Tomaso Vallelunga

How much vinyl does it take to wrap a De Tomaso Vallelunga?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a De Tomaso Vallelunga. That figure covers the coupe's full body, including the long doors. If you choose chrome or patterned film, plan for about 52 ft (16 m) because of the extra material needed for trimming.

Can I wrap only the hood or the roof of a Vallelunga?

Yes, you can wrap only the hood, the roof, or the mirror caps of a Vallelunga. These are all listed as partial wrap jobs for this car. Each piece is handled on its own, so you control how much of the body is covered.

Is a Vallelunga hard to wrap?

A Vallelunga is not the hardest car to wrap, but its two long side doors add work. Each door is one large piece of film that must be laid without creases. The overall length of 166.5 in (4,230 mm) is compact, which helps with handling the film around the curved nose.

How many generations of the Vallelunga does this page cover?

This page covers one generation of the De Tomaso Vallelunga, the only one in the catalog. That generation was produced from 1964 to 1968 as a two-door coupe. No other body styles or later generations exist for this model.