Wraps by car

De Tomaso Mangusta wrap

The De Tomaso Mangusta wrap page covers the first generation of this 1960s sports car. The coupe body was produced from 1967 to 1971. A full vinyl wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

De Tomaso Mangusta, first generation, factory photo
De Tomaso Mangusta, first generation. Factory color shown.

De Tomaso Mangusta wrap colors and ideas

  • Mangusta black wrap
  • Mangusta white wrap
  • Mangusta gray wrap
  • Mangusta silver wrap
  • Mangusta red wrap
  • Mangusta blue wrap
  • Mangusta green wrap
  • Mangusta yellow wrap
  • Mangusta orange wrap
  • Mangusta purple wrap
  • Mangusta pink wrap
  • Mangusta teal wrap
  • Mangusta brown wrap
  • Mangusta gold wrap
  • Mangusta chrome wrap
  • Mangusta color shift wrap
  • Mangusta carbon fiber wrap
  • Mangusta camo and patterned wrap

How much vinyl to wrap a De Tomaso Mangusta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1971coupe (2 doors)165.0 in (4,190 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Mangusta wrap cost factors

The Mangusta wrap cost depends on the condition of the 1967–1971 body and the film chosen. A car with original paint may need more preparation than one with a recent repaint. Full coverage of the 165.0 in (4,190 mm) coupe takes about 46 ft (14 m) of film.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mangusta wraps by generation

Swipe sideways. Tap a card for the full description.

De Tomaso Mangusta, first generation, factory photo
Factory color shown

1967–1971 Mangusta coupe (first generation)

1967–1971coupe (2 doors)165.0 in (4,190 mm)

The first generation De Tomaso Mangusta was built from 1967 to 1971. Paint age matters on a car of these years because panels may be original or repainted. A test spot on the paint comes before a full wrap to check adhesion.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Mangusta

A partial wrap on a Mangusta often covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF), a clear film on the front end, is another option.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a De Tomaso Mangusta: body, cut-outs and film

A De Tomaso Mangusta vinyl wrap on this coupe means working with a low, compact body that is 165.0 in (4,190 mm) long. The two long side doors each take one large piece of film. The roof and hood are also large panels that need careful handling.

Mangusta wrap ideas start with the two long side doors, which each need one large piece of film. The door handles and badges must be removed or cut around for a clean result. The front and rear bumpers are small, but their curves add time to the job.

Knowing how much vinyl to wrap a Mangusta depends on the single production run from 1967 to 1971. There is only one generation, so the same body measurements apply to every car. A full wrap uses about 46 ft (14 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a De Tomaso Mangusta

How much vinyl does it take to wrap a De Tomaso Mangusta?

A De Tomaso Mangusta takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. This figure is for the newest body style of the only generation, the 1967–1971 coupe.

Can I wrap only the hood or the roof of a Mangusta?

Yes, you can wrap only the hood or the roof of a Mangusta. These are standard partial wrap jobs along with mirror caps.

Is a Mangusta hard to wrap?

A Mangusta is not the hardest car to wrap, but its two long side doors add work because each door is one large piece of film. The 165.0 in (4,190 mm) length also means careful handling on a low coupe.

How many generations of the Mangusta does this page cover?

This page covers one generation of the Mangusta. That is the first generation, built from 1967 to 1971.