Wraps by car

De Tomaso Pantera wrap

This page covers the De Tomaso Pantera from 1970 to 1991, a single generation of the Italian-American sports car. A full vinyl wrap of a Pantera takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 49 ft (15 m) for the same coverage.

1generations11.5 mof film for a full wrap

De Tomaso Pantera, first generation, factory photo
De Tomaso Pantera, first generation. Factory color shown.

De Tomaso Pantera wrap colors and ideas

  • Pantera black wrap
  • Pantera white wrap
  • Pantera gray wrap
  • Pantera silver wrap
  • Pantera red wrap
  • Pantera blue wrap
  • Pantera green wrap
  • Pantera yellow wrap
  • Pantera orange wrap
  • Pantera purple wrap
  • Pantera pink wrap
  • Pantera teal wrap
  • Pantera brown wrap
  • Pantera gold wrap
  • Pantera chrome wrap
  • Pantera color shift wrap
  • Pantera carbon fiber wrap
  • Pantera camo and patterned wrap

How much vinyl to wrap a De Tomaso Pantera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1970–1991coupe (2 doors)158.0 in (4,013 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Pantera wrap cost factors

Pantera wrap cost depends on the size and condition of this 1970–1991 coupe, which needs about 38 ft (11.5 m) of 60-inch (1.52 m) film for a full color change. The two long doors are each one large piece, so labor time goes into handling them without creases. If the paint is original or old, the installer may need more prep work before the film goes on.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Pantera wraps by generation

Swipe sideways. Tap a card for the full description.

De Tomaso Pantera, first generation, factory photo
Factory color shown

1970–1991 Pantera coupe (first generation)

1970–1991coupe (2 doors)158.0 in (4,013 mm)

Paint age on a Pantera of these years varies, as panels may be original or repainted, and a test spot comes before a full wrap. The installer checks a small area for adhesion and paint lifting before covering the whole body. If the paint is weak, the wrap may pull it when removed, so the test spot avoids damage.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Pantera

A partial wrap on a Pantera can cover the roof, hood, or mirror caps. A chrome delete changes the window trim and badges to black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a De Tomaso Pantera: body, cut-outs and film

A De Tomaso Pantera vinyl wrap involves a coupe body with two long doors, each large enough to be wrapped as one piece of film. The car measures 158.0 in (4,013 mm) in length, which places it among mid-size two-door sports cars. Installers plan the wrap with the long flat door panels in mind, as they call for careful squeegee work.

Pantera wrap ideas start with the two long side doors, where each door is one large piece of film and the installer must avoid trapping air. The door handles and side mirrors need cut-outs, and many shops remove the mirrors for a cleaner edge. If you choose a chrome delete, the bright trim around the windows and the badges are separated from the paint film.

Since this page covers only the first generation, how much vinyl to wrap a Pantera stays the same for all years from 1970 to 1991. The body size did not change, so the figure of 38 ft (11.5 m) of 60-inch (1.52 m) film applies to every Pantera. Buyers who want a patterned or chrome film should plan for about 49 ft (15 m) instead.

Questions about wrapping a De Tomaso Pantera

How much vinyl does it take to wrap a De Tomaso Pantera?

A De Tomaso Pantera takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, budget about 49 ft (15 m) because the pattern repeat adds waste.

Can I wrap only the hood or the roof of a Pantera?

Yes, you can wrap only the hood or only the roof of a Pantera. A partial wrap often covers the roof, hood, or mirror caps, and a shop will cut the film to the size of the panel you choose.

Is a Pantera hard to wrap?

Yes, a Pantera is hard to wrap because the two long side doors each take one large piece of film and must be handled without creases. The car is 158.0 in (4,013 mm) long, so the installer works with oversized sheets on the sides.

How many generations of the Pantera does this page cover?

This page covers one generation of the De Tomaso Pantera, produced from 1970 to 1991. All years share the same coupe body and dimensions, so the wrap coverage is the same for every car.