Wraps by car

Geely MR wrap

The Geely MR is a subcompact offered in hatchback and sedan body styles across its single generation from 2003 to 2009. A full vinyl wrap takes about 44 ft (13.5 m) for the hatchback and up to 51 ft (15.5 m) for the sedan, using 60-inch (1.52 m) cast film. Chrome or patterned film increases the total to about 59 ft (18 m). This page covers panel planning, cut-outs, and what affects the wrap cost.

1generations15.5 mof film for a full wrap

Geely MR, first generation, factory photo
Geely MR, first generation. Factory color shown.

Geely MR wrap colors and ideas

  • Geely MR black wrap
  • Geely MR white wrap
  • Geely MR gray wrap
  • Geely MR silver wrap
  • Geely MR red wrap
  • Geely MR blue wrap
  • Geely MR green wrap
  • Geely MR yellow wrap
  • Geely MR orange wrap
  • Geely MR purple wrap
  • Geely MR pink wrap
  • Geely MR teal wrap
  • Geely MR brown wrap
  • Geely MR gold wrap
  • Geely MR chrome wrap
  • Geely MR color shift wrap
  • Geely MR carbon fiber wrap
  • Geely MR camo and patterned wrap

How much vinyl to wrap a Geely MR

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2009hatchback, sedan (4 or 5 doors)150.6 in (3,825 mm) to 162.4 in (4,125 mm)about 44 ft (13.5 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

Geely MR wrap cost factors

The Geely MR wrap cost depends on the body style, film type, and labor for cut-outs. The hatchback needs about 44 ft (13.5 m) of cast film, while the sedan uses up to 51 ft (15.5 m), plus extra for chrome or patterned film. More film and more doors raise the price on the longer sedan. You can reduce cost by choosing a partial wrap such as the hood or roof only.

  • Film for a full wrap: about 44 ft (13.5 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Geely MR wraps by generation

Swipe sideways. Tap a card for the full description.

Geely MR, first generation, factory photo
Factory color shown

2003–2009 Geely MR hatchback, sedan (first generation)

2003–2009hatchback, sedan (4 or 5 doors)150.6 in (3,825 mm) to 162.4 in (4,125 mm)

The first generation Geely MR came as a hatchback or sedan, and the style decides the panel plan and the film amount. The hatchback's tailgate includes the glass, so the wrap ends at the glass edge without film over it. The sedan adds rear doors and a trunk lid, adding about 7 ft of film. Both styles are subcompact and share the same 2003–2009 production run.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the hatchback to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Geely MR

A partial wrap on the Geely MR covers the roof, hood, or mirror caps without wrapping the whole car. A chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Geely MR: body, cut-outs and film

The Geely MR vinyl wrap changes with each body style because the sedan adds rear doors and a separate trunk lid. Hatchback lengths run about 150.6 in (3,825 mm), while sedans reach about 162.4 in (4,125 mm), so the sedan uses more film. The small overall size of this subcompact keeps the panel count low and the job manageable. You plan the film by doors, roof, bumpers, and the tailgate or trunk.

Geely MR wrap ideas start with the tailgate, which has the rear glass inside it, so the film must end at the edge of the glass. Installers cut around the door handles, mirrors, lights, and the badges unless you ask for a chrome delete. The roof rails or antenna, if fitted, also need cut-outs to keep the film flat. Removing small trim like the mirror caps or badges gives a cleaner edge on this car.

The amount of vinyl to wrap a Geely MR depends on the body style, not the production year within 2003–2009. Both the hatchback and sedan share the same generation, so the panel plan does not change over time. You simply measure the hatchback at about 44 ft (13.5 m) and the sedan at up to 51 ft (15.5 m) with 60-inch (1.52 m) cast film. Always add extra for waste on bumpers and door shuts.

Questions about wrapping a Geely MR

How much vinyl does it take to wrap a Geely MR?

It takes about 44 ft (13.5 m) to 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Geely MR, depending on body style. The hatchback sits at the lower end, while the sedan needs up to 51 ft (15.5 m). Chrome or patterned film can push the total to about 59 ft (18 m).

Which Geely MR body takes more film?

The sedan Geely MR takes more film than the hatchback. The sedan uses up to 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the hatchback takes about 44 ft (13.5 m). Extra doors and a trunk lid account for the difference.

Can I wrap only the hood or the roof of a Geely MR?

Yes, you can wrap only the hood or the roof of a Geely MR as a partial wrap. Mirror caps are another common single-panel option. A chrome delete on the window trim and badges is also a smaller job.

Is a Geely MR hard to wrap?

The Geely MR is not hard to wrap, but the tailgate requires careful cutting around the rear glass. The subcompact size keeps the panels small and the film amount to about 44–51 ft (13.5–15.5 m). The main extra work is the precise edge at the glass and any trim removal.