Wraps by car

Haima Family F7 wrap

The Haima Family F7 is a five-door minivan covered here in one generation from 2017 to now. A full vinyl wrap of the body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. This page explains what a wrap for this car involves and the jobs a shop can do.

1generations20.5 mof film for a full wrap

Haima Family F7, first generation, factory photo
Haima Family F7, first generation. Factory color shown.

Haima Family F7 wrap colors and ideas

  • Family F7 black wrap
  • Family F7 white wrap
  • Family F7 gray wrap
  • Family F7 silver wrap
  • Family F7 red wrap
  • Family F7 blue wrap
  • Family F7 green wrap
  • Family F7 yellow wrap
  • Family F7 orange wrap
  • Family F7 purple wrap
  • Family F7 pink wrap
  • Family F7 teal wrap
  • Family F7 brown wrap
  • Family F7 gold wrap
  • Family F7 chrome wrap
  • Family F7 color shift wrap
  • Family F7 carbon fiber wrap
  • Family F7 camo and patterned wrap

How much vinyl to wrap a Haima Family F7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowvan (5 doors)185.0 in (4,700 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Family F7 wrap cost factors

Family F7 wrap cost depends on the amount of film, the labor for the large panels, and the extra work around the sliding door tracks. A full wrap uses about 67 ft (20.5 m) of film, while taking off handles and badges adds time. The final cost follows the condition of the paint and the finish you pick.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Family F7 wraps by generation

Swipe sideways. Tap a card for the full description.

Haima Family F7, first generation, factory photo
Factory color shown

2017–now Family F7 van (first generation)

2017–nowvan (5 doors)185.0 in (4,700 mm)

The first generation Family F7, sold from 2017, is a five-door van with sliding side doors. The tracks for those doors stay bare, and installers cut the vinyl along them. This detail controls the vinyl placement on the lower body sides.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Family F7

A partial wrap on a Family F7 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is another smaller job.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Haima Family F7: body, cut-outs and film

A Haima Family F7 vinyl wrap covers one body style: a five-door van that is 185.0 in (4,700 mm) long. Its van body has tall flat sides, so installers use full-width film panels. The long roof and large doors are the main areas that consume film on this minivan.

Family F7 wrap ideas include covering the big side panels, but the sliding door tracks stay bare. Installers cut the film along the tracks and tuck the edges cleanly. The door handles, badges, and mirrors come off for a neat wrap.

There is only one generation of the Family F7 in this catalog, so how much vinyl to wrap a Family F7 does not change between model years. All cars from 2017 share the same 185.0 in (4,700 mm) body. A shop can use the same film estimate for any year of this minivan.

Questions about wrapping a Haima Family F7

How much vinyl does it take to wrap a Haima Family F7?

A full wrap of a Haima Family F7 takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 80 ft (24.5 m). The estimate covers the 185.0 in (4,700 mm) five-door body.

Are the sliding doors of a Family F7 wrapped?

No, the sliding door tracks of a Family F7 stay bare. The film is cut along the tracks and tucked in, so the doors still slide freely.

Can I wrap only the hood or the roof of a Family F7?

Yes, you can wrap only the hood or the roof of a Family F7 as a partial job. A shop can also cover the mirror caps or do a chrome delete on the window trim and badges.

Is a Family F7 hard to wrap?

A Family F7 is not hard to wrap, but its sliding door tracks add work. The tracks must stay bare, so the film is cut along them. The 185.0 in (4,700 mm) body also means large panels that take time to lay smoothly.